10-30-2020, 05:45 PM | #1 |
Registered User
Join Date: Jan 2019
Location: Bonner Springs, KS
Posts: 56
|
Ground the PCM
Went for my first start today with 5.3 swap homemade harness. Dead with no fuel pump kick on. I imagined the worst, did the harness myself with lt1swap instructions. Read on another sight to ground the pcm case. It fired right up
|
10-30-2020, 09:37 PM | #2 |
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: Ground the PCM
Thanks for the insight.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
10-30-2020, 10:23 PM | #3 |
Senior Member
Join Date: May 2009
Location: Fort Worth, TX
Posts: 6,370
|
Re: Ground the PCM
The PCM body doesn't need to be grounded......If it did, You're missing ground connection somewhere.
|
10-31-2020, 04:18 PM | #4 |
Registered User
Join Date: Jun 2015
Location: Carlos MN
Posts: 2,131
|
Re: Ground the PCM
I've never grounded the case of the PCM on my LS swaps. But I've never built a harness myself. Always purchased the PCM and harness from the same supplier.
|
11-01-2020, 07:35 PM | #5 |
Registered User
Join Date: Jan 2019
Location: Bonner Springs, KS
Posts: 56
|
Re: Ground the PCM
Now that I think of it, there were a few stray ground wires not accounted for, but grounding the case fixed it
|
11-01-2020, 10:25 PM | #6 |
Post Whore
Join Date: May 2015
Location: Alabama
Posts: 14,670
|
Re: Ground the PCM
With a LS swap, the more grounds the merrier...
__________________
Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver |
11-02-2020, 09:31 PM | #7 |
Senior Member
Join Date: Sep 2005
Location: Lewisville, Nc
Posts: 10,237
|
Re: Ground the PCM
I had to do the same thing on my swap about 300 miles into swap I had lot of run issuses turns out I never bolted the grounds to back of the head and they where touching hit a bump lost ground I felt like an idiot but never went back and ungrounded the pcm
__________________
David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube |
11-02-2020, 10:36 PM | #8 |
Registered User
Join Date: Jun 2015
Location: Carlos MN
Posts: 2,131
|
Re: Ground the PCM
As said above Ls swaps love good clean grounds. Main ground cable from the battery I run the 00 gauge cable directly to the engine block. Then on each side of the engine block back to the frame. Similar size cable. I try to hide them. If you have any paint on the block make sure you sand down to good metal. Star lock washers help bite into the head bolt holes.
|
11-03-2020, 12:02 AM | #9 | |
BMW & ASE Master Certified
Join Date: Feb 2004
Location: Houston, Texas
Posts: 1,266
|
Re: Ground the PCM
Quote:
if that's the case, your going to be creating problems thats going to be hard to trouble shoot over the web....
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes 1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD A poor man buy's it twice finally got my domain name back, 87chevy.com.... site rework in progress |
|
Bookmarks |
|
|