AZ Suburban body for patch panel cuts

[t korinek]

Getting ready to scrap this 67 if anybody looking for any of the parts or cuts off of it.

[68PanelTruck]

Do you ship? If so I need the driver side rear quarter section around the gas neck and marker light area. Depending on the price plus shipping, I could use from the front of the arch and back including the entire rear door pillar and wheel well if its in decent shape. I don't need the window frame because this is for a Panel truck. If the price is right, I can also use the same from the passenger side, from the front of the wheel arch and back including the rear door pillar, wheel well minus the window.

So what I really need is the gas filler neck hole area and both left and right rear marker light holes. Even a 12" x 12" or 16" x 16" would do but the sections I listed above would be great depending on the price with shipping. I also need the rear door sill too.
Robert

[lstruckman]

I would be interested in the rear corner trim pieces and the door sill plate from the rear ( at tailgate) if that is laying inside.
Let me know
Thanks Alex

[Madkidd007]

What kind of condition is what’s left of the 3rd door rocker?

[t korinek]

Here’s better pics of the bed sides, I can ship, of course the bigger the piece the more expensive shipping.

Most patches around $40

[t korinek]

Here’s pics of the corner trims, they are in good shape, $75 for the pair + shipping?

[Madkidd007]

Also this area I’d be interested in

[68PanelTruck]

You can see my above post or, at the very minimum I would need both left and right rear marker light holes and the area around the gas tank filler. If possible, you could make the gas filler hole and the marker light hole all one cut. I also need the rear tailgate door sill, any pics of that?

[suville]

Are the inner wheel tubs good where it bolts to the wood floor? i need the driver side if so. Thanks for your time