Cowl Hoods - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1981_c10 · 11-17-2020, 03:54 PM

Does anyone have suggestions for a vendor for a cowl hood? I have one currently on my 81 that i bought 15 years ago and it seem to bow in the middle and never fit super well. I really like the look and would like to buy another. I am in DFW area and know southwest classics sells them but not sure on fit.

Any suggestions?

EricU · 11-17-2020, 07:08 PM

Quote:

Originally Posted by 1981_c10

Does anyone have suggestions for a vendor for a cowl hood? I have one currently on my 81 that i bought 15 years ago and it seem to bow in the middle and never fit super well. I really like the look and would like to buy another. I am in DFW area and know southwest classics sells them but not sure on fit.

Any suggestions?

Sorry, but I have no idea where this one came from but I will be pulling it off soon and replacing it with a factory flat hood. It is metal and in really good shape.

But I am in Nor Cal.

bigdisplay442 · 11-17-2020, 07:15 PM

When I did the research for my purchase. I ended up finding the best deal, including shipping and taxes, was to go to Summit in Arlington and pick it up. If you do that, make sure to inspect the hood right there inside the store before you accept it.

**old Rusty C10** · 11-17-2020, 07:44 PM

the last couple i got were goodmark.. they use a different name but it says "by goodmark" on the box i forget the exact name

bigdisplay442 · 11-17-2020, 08:07 PM

Not sure if I'm mistaken, but I thought the OP asked for a vendor, not a manufacturer for the hood. I took it that he was looking for a place to buy the hood? Sorry, if my reply was incorrect.

1981_c10 · 11-18-2020, 05:20 PM

This is all helpful! I will try out Summit. Very close to me so would nice to pick up in store!

1981_c10 · 11-19-2020, 11:21 AM

Quote:

Originally Posted by bigdisplay442

Not sure if I'm mistaken, but I thought the OP asked for a vendor, not a manufacturer for the hood. I took it that he was looking for a place to buy the hood? Sorry, if my reply was incorrect.

Do you remember which manufacturer you used from Summit? Was it Keyparts? There are a few others. Looks like keyparts is the only one in stock.

I talked to southwest classic and they use triplus and said they have no issues with the fit of their cowl hoods. Just more expensive.

bigdisplay442 · 11-19-2020, 02:57 PM

Quote:

Originally Posted by 1981_c10

Do you remember which manufacturer you used from Summit? Was it Keyparts? There are a few others. Looks like keyparts is the only one in stock.

I talked to southwest classic and they use triplus and said they have no issues with the fit of their cowl hoods. Just more expensive.

I'm 75% sure mine is the Keyparts. I'm not home this week or I'd go check and see for sure. It is getting fitted and painted this weekend. I'll be sure to post a picture and my thoughts as soon as it's done.

SCOTI · 11-19-2020, 03:49 PM

I picked up some 67-72 wheel tubs (widened & stock width) from Summit & both were from AMD. Point being, there are probably multiple 'sources' that Summit distributes for.

1981_c10 · 11-19-2020, 04:18 PM

Quote:

Originally Posted by bigdisplay442

I'm 75% sure mine is the Keyparts. I'm not home this week or I'd go check and see for sure. It is getting fitted and painted this weekend. I'll be sure to post a picture and my thoughts as soon as it's done.

That would be great! Look forward to seeing pictures.

1981_c10 · 11-19-2020, 04:19 PM

Quote:

Originally Posted by SCOTI

I picked up some 67-72 wheel tubs (widened & stock width) from Summit & both were from AMD. Point being, there are probably multiple 'sources' that Summit distributes for.

For sure. There are a number of manufacturers for the hoods as well. Just trying to make the best decision for which to go with or not go with.

Thanks for your insight. Dig your truck btw.

Ziegelsteinfaust · 11-19-2020, 04:24 PM

I used up22 in Victorville, but shipping will likely be a deal killer.

On a side note a 2.5 inch version didn't obstruct my view, and a 4 inch version was fine by me. Although my friend who is quite a bit taller 6'3" hated it, and I am only 5'9". Depending on the line up.

Depending on what you want to do with it. You can seal the carb to the cowl for cool air to the motor. Or vent hot air out of the engine compartment.

bigdisplay442 · 11-19-2020, 09:31 PM

Hey SCOTI, Almost related...lol
Name: 1991dually12122003004.jpg
Views: 541
Size: 94.0 KB

SCOTI · 11-19-2020, 11:42 PM

Quote:

Originally Posted by bigdisplay442

Hey SCOTI, Almost related...lol
Attachment 2061848

Cousins.

sweetk30 · 11-20-2020, 08:18 AM

Got mine in that box that said goldmark but wasn't all super badged up goldmark.

Fit great and no major problems .

1981_c10 · 11-20-2020, 09:24 AM

Quote:

Originally Posted by sweetk30

Got mine in that box that said goldmark but wasn't all super badged up goldmark.

Fit great and no major problems .

Looks great!

sweetk30 · 11-20-2020, 03:16 PM

thanks . going to get white down middle for 2 tone look . and its getting stock rally wheels in white and no trim rings .

1981_c10 · 11-20-2020, 04:14 PM

I dig it. I will be painting mine silver with a red stripes to match the interior. Havent decided on wheels yet.

bigdisplay442 · 11-21-2020, 06:07 PM

Quote:

Originally Posted by 1981_c10

Do you remember which manufacturer you used from Summit? Was it Keyparts? There are a few others. Looks like keyparts is the only one in stock.

I talked to southwest classic and they use triplus and said they have no issues with the fit of their cowl hoods. Just more expensive.

Ok, I checked my box/hood and it's a Keyparts brand. The painter picked it up this morning. He won't have it finished for install until next weekend, so it'll be sometime after that before I get it on and pics posted.

gvchevy · 11-22-2020, 08:58 AM

Get the Key parts hood, most of the Goodmark and private labeled hoods are the Key Parts brand. I used to sell them and was a goodmark dealer 75% of the boxes were keyparts. Probably sold over 200 of them never had a come back.

1981_c10 · 11-23-2020, 09:26 AM

Great input! Thank you! Will be buying this week.

bigdisplay442 · 11-29-2020, 02:43 PM

My opinion..... I give it 3.5 out of 5. It would be a 4.5, but the front to back measurement is about a 1/4" shorter on the Keyparts hood from the OEM hood. This leaves a gap at the wiper cowl that is too big IMO. The pros of the hood are it's very straight and smooth. While not perfect, It fits the same as the OEM hood did from side to side.
For those who might ask, I did black because I plan on doing a Black over red paint scheme, Sequoyah special style, eventually.

1981_c10 · 11-30-2020, 02:11 PM

Thanks for the input! I think i could live with the gap on the back.

11-17-2020, 03:54 PM	#1
1981_c10 Registered User Join Date: May 2015 Location: Fort Worth Posts: 317	Cowl Hoods Does anyone have suggestions for a vendor for a cowl hood? I have one currently on my 81 that i bought 15 years ago and it seem to bow in the middle and never fit super well. I really like the look and would like to buy another. I am in DFW area and know southwest classics sells them but not sure on fit. Any suggestions? __________________ Builds: 1962 C10 Recreating Dad's High School Truck 1981 C10

11-17-2020, 07:15 PM	#3
bigdisplay442 Registered User Join Date: Nov 2015 Location: Whitehouse, Texas Posts: 21	Re: Cowl Hoods When I did the research for my purchase. I ended up finding the best deal, including shipping and taxes, was to go to Summit in Arlington and pick it up. If you do that, make sure to inspect the hood right there inside the store before you accept it. __________________ 1966 C/10 swb LS 5.3L/4L60 1988 Chevy C/C R/30 dually LBZ Duramax conversion 1991 GMC C/C V3500 454/4L80 1993 C/2500 E/C swb 5.7L 2003 K1500HD quadrasteer C/C 6.0L 2004 K2500 quadrasteer C/C 6.0L

11-17-2020, 07:44 PM	#4
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: Cowl Hoods the last couple i got were goodmark.. they use a different name but it says "by goodmark" on the box i forget the exact name __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

11-17-2020, 08:07 PM	#5
bigdisplay442 Registered User Join Date: Nov 2015 Location: Whitehouse, Texas Posts: 21	Re: Cowl Hoods Not sure if I'm mistaken, but I thought the OP asked for a vendor, not a manufacturer for the hood. I took it that he was looking for a place to buy the hood? Sorry, if my reply was incorrect. __________________ 1966 C/10 swb LS 5.3L/4L60 1988 Chevy C/C R/30 dually LBZ Duramax conversion 1991 GMC C/C V3500 454/4L80 1993 C/2500 E/C swb 5.7L 2003 K1500HD quadrasteer C/C 6.0L 2004 K2500 quadrasteer C/C 6.0L

11-18-2020, 05:20 PM	#6
1981_c10 Registered User Join Date: May 2015 Location: Fort Worth Posts: 317	Re: Cowl Hoods This is all helpful! I will try out Summit. Very close to me so would nice to pick up in store! __________________ Builds: 1962 C10 Recreating Dad's High School Truck 1981 C10

11-19-2020, 03:49 PM	#9
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	Re: Cowl Hoods I picked up some 67-72 wheel tubs (widened & stock width) from Summit & both were from AMD. Point being, there are probably multiple 'sources' that Summit distributes for. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

11-19-2020, 04:24 PM	#12
Ziegelsteinfaust Registered User Join Date: Dec 2012 Location: Temple City Posts: 3,628	Re: Cowl Hoods I used up22 in Victorville, but shipping will likely be a deal killer. On a side note a 2.5 inch version didn't obstruct my view, and a 4 inch version was fine by me. Although my friend who is quite a bit taller 6'3" hated it, and I am only 5'9". Depending on the line up. Depending on what you want to do with it. You can seal the carb to the cowl for cool air to the motor. Or vent hot air out of the engine compartment.

11-19-2020, 09:31 PM	#13
bigdisplay442 Registered User Join Date: Nov 2015 Location: Whitehouse, Texas Posts: 21	Re: Cowl Hoods Hey SCOTI, Almost related...lol __________________ 1966 C/10 swb LS 5.3L/4L60 1988 Chevy C/C R/30 dually LBZ Duramax conversion 1991 GMC C/C V3500 454/4L80 1993 C/2500 E/C swb 5.7L 2003 K1500HD quadrasteer C/C 6.0L 2004 K2500 quadrasteer C/C 6.0L

11-20-2020, 08:18 AM	#15
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: Cowl Hoods Got mine in that box that said goldmark but wasn't all super badged up goldmark. Fit great and no major problems . Attached Images __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

11-20-2020, 03:16 PM	#17
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: Cowl Hoods thanks . going to get white down middle for 2 tone look . and its getting stock rally wheels in white and no trim rings . __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

11-20-2020, 04:14 PM	#18
1981_c10 Registered User Join Date: May 2015 Location: Fort Worth Posts: 317	Re: Cowl Hoods I dig it. I will be painting mine silver with a red stripes to match the interior. Havent decided on wheels yet. __________________ Builds: 1962 C10 Recreating Dad's High School Truck 1981 C10

11-22-2020, 08:58 AM	#20
gvchevy Registered User Join Date: Sep 2010 Location: jefferson city Missouri Posts: 23	Re: Cowl Hoods Get the Key parts hood, most of the Goodmark and private labeled hoods are the Key Parts brand. I used to sell them and was a goodmark dealer 75% of the boxes were keyparts. Probably sold over 200 of them never had a come back.

11-23-2020, 09:26 AM	#21
1981_c10 Registered User Join Date: May 2015 Location: Fort Worth Posts: 317	Re: Cowl Hoods Great input! Thank you! Will be buying this week. __________________ Builds: 1962 C10 Recreating Dad's High School Truck 1981 C10

11-29-2020, 02:43 PM	#22
bigdisplay442 Registered User Join Date: Nov 2015 Location: Whitehouse, Texas Posts: 21	Re: Cowl Hoods My opinion..... I give it 3.5 out of 5. It would be a 4.5, but the front to back measurement is about a 1/4" shorter on the Keyparts hood from the OEM hood. This leaves a gap at the wiper cowl that is too big IMO. The pros of the hood are it's very straight and smooth. While not perfect, It fits the same as the OEM hood did from side to side. For those who might ask, I did black because I plan on doing a Black over red paint scheme, Sequoyah special style, eventually. Attached Images __________________ 1966 C/10 swb LS 5.3L/4L60 1988 Chevy C/C R/30 dually LBZ Duramax conversion 1991 GMC C/C V3500 454/4L80 1993 C/2500 E/C swb 5.7L 2003 K1500HD quadrasteer C/C 6.0L 2004 K2500 quadrasteer C/C 6.0L

11-30-2020, 02:11 PM	#23
1981_c10 Registered User Join Date: May 2015 Location: Fort Worth Posts: 317	Re: Cowl Hoods Thanks for the input! I think i could live with the gap on the back. __________________ Builds: 1962 C10 Recreating Dad's High School Truck 1981 C10



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.