OR 72 suburban parts and cuts

[bcfishon]

Another 72 beyond saving due to some person.
3/4 c20 frame $250
False door inner floor to door threshhold $75 sold
false door inner skin $75
Ochre air conditioning dash $150
Pillars $100 each 3rd door pillar is gone
Air conditioning suitcase and interior ducting box and odds and ends,no vent bezels $150
Rear paneling brackets $50
Both quarters are sold
Plus shipping if I need to ship.and shipping requires me to pack and go into town for quote and then get back to people.

The floor braces are good and some additional good items for picking so feel free to ask.

[bcfishon]

Some more

[Getter-Done]

I will take 3rd door pillar.



.

[bcfishon]

Originally Posted by Getter-Done

I will take 3rd door pillar.



.

Dwayne,
Its yours
Pm sent

[Dave]

I'd be interested pending more pics and price of the entire rh panel asm cut at the roof sail panels, including the inner wheel house. Also the lh panel, if it has solid inners.
Thanks

[suville]

I would be very interested in the driver side inner wheel tub providing it isnt rusted away at the mounting flange to floor Thanks for your time and Merry Christmas!

[Madkidd007]

Originally Posted by bcfishon

False door inner floor to door threshhold $75
false door inner skin $75.

I’d be interested in the Inner rocker section. Can you post a better picture so I can see the condition and where it was cut?

[1rippen6]

Picture of the ochre dash, thanks

[bcfishon]

Originally Posted by 1rippen6

Picture of the ochre dash, thanks

Here's the dash, AC vent not included

[bcfishon]

Originally Posted by Madkidd007

I’d be interested in the Inner rocker section. Can you post a better picture so I can see the condition and where it was cut?

Is it this?

[Madkidd007]

Originally Posted by bcfishon

Is it this?

That is it. I assume you cut it along the line? If so I’ll go look and see if that’ll still work for my needs

[bcfishon]

Originally Posted by suville

I would be very interested in the driver side inner wheel tub providing it isnt rusted away at the mounting flange to floor Thanks for your time and Merry Christmas!

Wheel tub is in solid shape and the mounting flange is good $75 plus ship

[bcfishon]

Originally Posted by Dave

I'd be interested pending more pics and price of the entire rh panel asm cut at the roof sail panels, including the inner wheel house. Also the lh panel, if it has solid inners.
Thanks

I think the pass side Assembly is fairly solid,some rust at the bottom of rear wheel well.
That's a pretty big chunk of metal if we are talking the right side quarter panel.Not the best pictures so feel free to ask for more specifics.

[bcfishon]

Originally Posted by Madkidd007

That is it. I assume you cut it along the line? If so I’ll go look and see if that’ll still work for my needs

Correct but the run up the back wall got shortened a bit.

[Dave]

In post 13 the first pic, I'm not sure what that's a pic of? Front of the panel maybe?

Also I asked about the lh panel with the inner pcs attached. Where do we stand with that?
Lmk thx

[Bgrdmoose]

Interested in the gas tank sending unit, nuts from bolts that go through the tank & the dash ac switch

[68PanelTruck]

I'd be interested in the rear door sill (not the chrome trim piece) It unbolts from the rear door pillars and is attached to the frame and floor. Got any pics? Condition? Any rust?
Thanks

[Madkidd007]

Originally Posted by bcfishon

Correct but the run up the back wall got shortened a bit.

Looks good to me, I’ll take it. You can cut the back piece off flush With the floor as I won’t be using it and should help packaging easier. Do you have the front section as well? Basically this exact piece but where it was cutoff from this piece forward?

[bcfishon]

Originally Posted by Dave

In post 13 the first pic, I'm not sure what that's a pic of? Front of the panel maybe?

Also I asked about the lh panel with the inner pcs attached. Where do we stand with that?
Lmk thx

Yes its the front inside shot of the panel,the lh you asked for is the left side panel if I understand correctly and if so it looks solid as well,suville is interested in that side tub,jftr

[bcfishon]

Originally Posted by Dave

In post 13 the first pic, I'm not sure what that's a pic of? Front of the panel maybe?

Also I asked about the lh panel with the inner pcs attached. Where do we stand with that?
Lmk thx

Originally Posted by Bgrdmoose

Interested in the gas tank sending unit, nuts from bolts that go through the tank & the dash ac switch

Will check on those tomorrow for condition and get back to you

[bcfishon]

Originally Posted by Madkidd007

Looks good to me, I’ll take it. You can cut the back piece off flush With the floor as I won’t be using it and should help packaging easier. Do you have the front section as well? Basically this exact piece but where it was cutoff from this piece forward?

I think so,I believe I cut that one with the rocker intact, will check tomorrow and get back to you. Your name is on the the other item,thanks

[bcfishon]

Originally Posted by 68PanelTruck

I'd be interested in the rear door sill (not the chrome trim piece) It unbolts from the rear door pillars and is attached to the frame and floor. Got any pics? Condition? Any rust?
Thanks

Will check on that tomorrow, may also have one already pulled,

[68PanelTruck]

cool, thanks

[suville]

Originally Posted by bcfishon

Wheel tub is in solid shape and the mounting flange is good $75 plus ship

I'll take it, PM me your info and I'll get a USPS money order to you my zip is 83647 Idaho. Thanks

[Dave]

Originally Posted by bcfishon

Yes its the front inside shot of the panel,the lh you asked for is the left side panel if I understand correctly and if so it looks solid as well,suville is interested in that side tub,jftr

Ok lmk price on the rh panel complete with the inner wheel tub, basically the whole thing, less the roof posts.
Also, what's up with the lh side since the wheel tub has just been carved out even though I asked about it.
Thank you