Brake trouble!!!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Heavy-Chevy · 12-19-2003, 01:49 AM

I have a 1988 4x4 non=dually crew one ton, they cannot find the correct rotors for the front brakes....

4 days and counting

Any help would begreat...

apstguy · 12-19-2003, 02:17 AM

What brake package do you have on it?

Heavy-Chevy · 12-19-2003, 02:26 AM

They said Heavy Duty like a dually,but it is a non-dually.

The dually set-up came close to working ,but the lug holes where to small(7/16).

**swervin ervin** · 12-19-2003, 02:34 AM

You should have a rpo code on the sticker in the glovebox or wherever they are on 88's. It will be something like JB5 or JB6 or some number, but it will JB?. This is what they need to find the rotors. What place is this?? Sounds like Autozone to me.

If this don't work, let me check in my part books and see if I can come up with a GM part number. I'll check tomorrow for you.

Heavy-Chevy · 12-19-2003, 02:40 AM

I think it is Autozone & O'riely's

Thanks !!

should I just go to a Chevy house?

Heavy-Chevy · 12-19-2003, 02:41 AM

Wal-Mart gives you the wrong oil filter size too!!!

**swervin ervin** · 12-19-2003, 12:46 PM

OK, here's what my GM parts catalog says.

87-89 is the same part numbers as it is for 85-86. 89 is as high as the catalog I have goes. Anyway, for a R3, or 1 ton 2wd, non dually, the GM part number for the rotors is 344016. Just for giggles, the GM dually number is 6260806.

They should be able to reference these numbers in their catalogs. Of course I know we are talking Autozone here.

Hope this helps.

Mike

ElGracho · 12-19-2003, 03:31 PM

This isn't hard. I used the autozone site to find the info:

1988 Chevrolet Truck V30 (remember, in 87 these style trucks changed to R/V instead of C/K, knowing this might have been all you needed.)

Anyhow, with a 350, 454 or 6.2 Diesel gives all the same part numbers, with single rear wheel, Aimco 5563 $47.99 each. You will have to press the lugs out of the rotors and hubs and then back in, is that why they seemed too small?

Heavy-Chevy · 12-19-2003, 09:36 PM

They said it was 1973 rotors.

12-19-2003, 01:49 AM	#1
Heavy-Chevy Registered User Join Date: Jul 2000 Location: Ennis (& Styx),Texas Posts: 1,325	Brake trouble!!!!! I have a 1988 4x4 non=dually crew one ton, they cannot find the correct rotors for the front brakes.... 4 days and counting Any help would begreat... __________________ TRUCKS & Autos that run: 1972 GMC Sierra Grande 3/4ton LWB 4x4 1972 Chevrollet K/5 with a 6"Lift, 462 heads "money pit" 1988 K3500 Crew "Big Red" 4x4 PARTS OR PROJECT TRUCKS: PARTS for sale or trade: WANT : 1972 parts blazer/Jimmy parts truck 1967-72 Parts Chevy/GMC Truck NEED stainless hubcap for 3/4ton GMC

12-19-2003, 02:17 AM	#2
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,087	What brake package do you have on it? __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

12-19-2003, 02:26 AM	#3
Heavy-Chevy Registered User Join Date: Jul 2000 Location: Ennis (& Styx),Texas Posts: 1,325	They said Heavy Duty like a dually,but it is a non-dually. The dually set-up came close to working ,but the lug holes where to small(7/16). __________________ TRUCKS & Autos that run: 1972 GMC Sierra Grande 3/4ton LWB 4x4 1972 Chevrollet K/5 with a 6"Lift, 462 heads "money pit" 1988 K3500 Crew "Big Red" 4x4 PARTS OR PROJECT TRUCKS: PARTS for sale or trade: WANT : 1972 parts blazer/Jimmy parts truck 1967-72 Parts Chevy/GMC Truck NEED stainless hubcap for 3/4ton GMC

12-19-2003, 02:34 AM	#4
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	You should have a rpo code on the sticker in the glovebox or wherever they are on 88's. It will be something like JB5 or JB6 or some number, but it will JB?. This is what they need to find the rotors. What place is this?? Sounds like Autozone to me. If this don't work, let me check in my part books and see if I can come up with a GM part number. I'll check tomorrow for you. __________________ Mike 1985 Chevy C-10

12-19-2003, 02:40 AM	#5
Heavy-Chevy Registered User Join Date: Jul 2000 Location: Ennis (& Styx),Texas Posts: 1,325	I think it is Autozone & O'riely's Thanks !! should I just go to a Chevy house? __________________ TRUCKS & Autos that run: 1972 GMC Sierra Grande 3/4ton LWB 4x4 1972 Chevrollet K/5 with a 6"Lift, 462 heads "money pit" 1988 K3500 Crew "Big Red" 4x4 PARTS OR PROJECT TRUCKS: PARTS for sale or trade: WANT : 1972 parts blazer/Jimmy parts truck 1967-72 Parts Chevy/GMC Truck NEED stainless hubcap for 3/4ton GMC

12-19-2003, 02:41 AM	#6
Heavy-Chevy Registered User Join Date: Jul 2000 Location: Ennis (& Styx),Texas Posts: 1,325	Wal-Mart gives you the wrong oil filter size too!!! __________________ TRUCKS & Autos that run: 1972 GMC Sierra Grande 3/4ton LWB 4x4 1972 Chevrollet K/5 with a 6"Lift, 462 heads "money pit" 1988 K3500 Crew "Big Red" 4x4 PARTS OR PROJECT TRUCKS: PARTS for sale or trade: WANT : 1972 parts blazer/Jimmy parts truck 1967-72 Parts Chevy/GMC Truck NEED stainless hubcap for 3/4ton GMC

12-19-2003, 12:46 PM	#7
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	OK, here's what my GM parts catalog says. 87-89 is the same part numbers as it is for 85-86. 89 is as high as the catalog I have goes. Anyway, for a R3, or 1 ton 2wd, non dually, the GM part number for the rotors is 344016. Just for giggles, the GM dually number is 6260806. They should be able to reference these numbers in their catalogs. Of course I know we are talking Autozone here. Hope this helps. Mike

12-19-2003, 03:31 PM	#8
ElGracho Gentleman Jim Driver Join Date: Nov 2002 Location: Poulsbo, WA Posts: 1,553	This isn't hard. I used the autozone site to find the info: 1988 Chevrolet Truck V30 (remember, in 87 these style trucks changed to R/V instead of C/K, knowing this might have been all you needed.) Anyhow, with a 350, 454 or 6.2 Diesel gives all the same part numbers, with single rear wheel, Aimco 5563 $47.99 each. You will have to press the lugs out of the rotors and hubs and then back in, is that why they seemed too small? __________________ Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '89 R3500 Flatbed

12-19-2003, 09:36 PM	#9
Heavy-Chevy Registered User Join Date: Jul 2000 Location: Ennis (& Styx),Texas Posts: 1,325	They said it was 1973 rotors. __________________ TRUCKS & Autos that run: 1972 GMC Sierra Grande 3/4ton LWB 4x4 1972 Chevrollet K/5 with a 6"Lift, 462 heads "money pit" 1988 K3500 Crew "Big Red" 4x4 PARTS OR PROJECT TRUCKS: PARTS for sale or trade: WANT : 1972 parts blazer/Jimmy parts truck 1967-72 Parts Chevy/GMC Truck NEED stainless hubcap for 3/4ton GMC



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.