MO New Repair piece for lower right hand side of radiator support

[Clatterville trolley]

I have been making these for folks that I sell parts to for some time and thought I might offer a couple to the folks on here.

I hand form these and they come with the weld in nuts and factory OEM bolts.

They are made out of 16 gauge steel - I checked the thickness of the steel in the radiator support with a gauge and they appear to be about 17 gauge, so these are a little thicker than stock.

I constructed them to be long enough to reach under the upright where the rust normally stops unless it is really baaaadddd!

I leave the weld nuts loose so that it allows slight adjustment to line up with the holes in the inner fender front - once you get them where you want them it is easy enough to spot them in.

Right now I only have two made up so that is all I am selling for the moment - not trying to turn this into a business.

Price $75 shipped to you.

First photo shows the replacement piece next to a rusted up one that I removed to replace with new.

Last photo shows where the new repair piece goes on a radiator support.

Works for 67-72 C10's

[72 Super]

That is a nice piece. Great workmanship.

Ray

[CS1972]

You state: "Works for 67-72 C10's", I believe it will work on my 72 K10 as well, correct? If the answer is "Yes", I'll take one.

[Clatterville trolley]

Originally Posted by CS1972

You state: "Works for 67-72 C10's", I believe it will work on my 72 K10 as well, correct? If the answer is "Yes", I'll take one.

I have never to my knowledge had any 4 wheel drive parts, so I can't say for certain. However, if a regular radiator support for a 2 wheel drive will interchange with one for a 4 wheel drive, then yes it will work. Jay

[FL71C10]

Nice part! I can tell you spend a lot of time on those.

[72 Super]

Originally Posted by CS1972

You state: "Works for 67-72 C10's", I believe it will work on my 72 K10 as well, correct? If the answer is "Yes", I'll take one.

Ryan,

The core supports are the same for a 2wd/4wd.

Ray

[CS1972]

I figured the repair piece was the same for 2 or 4 wheel drive, but it's always good to get confirmation. Thanks Ray.

PAYPAL Payment sent

[Clatterville trolley]

Originally Posted by CS1972

I figured the repair piece was the same for 2 or 4 wheel drive, but it's always good to get confirmation. Thanks Ray.

PAYPAL Payment sent

Paypal received. Part will go out by first of the week. Jay

[Clatterville trolley]

Originally Posted by CS1972

I figured the repair piece was the same for 2 or 4 wheel drive, but it's always good to get confirmation. Thanks Ray.

PAYPAL Payment sent

Repair piece with ship out today when I get to Post Office. Will update you tonight with the tracking number. Thanks! Jay

[Clatterville trolley]

Okay everyone, I still have one of these made up and ready for shipment. Any other takers??

[Clatterville trolley]

Originally Posted by Clatterville trolley

Repair piece with ship out today when I get to Post Office. Will update you tonight with the tracking number. Thanks! Jay

USPS tracking number is #9505 5117 9007 1040 6036 36

Expected delivery date 2/12/21

[burb71]

I'll take it

[Clatterville trolley]

Originally Posted by burb71

I'll take it

It is yours then - PayPal address is at the bottom of all my posts. Once I receive payment your repair piece will ship. Thanks for your purchase! Jay

[burb71]

Jay it looks like I might have found a excellent condition core support Here Local.
I'm going to look at it on Sunday I'll get back in touch with you if it's not as advertised.

[Clatterville trolley]

Originally Posted by burb71

Jay it looks like I might have found a excellent condition core support Here Local.
I'm going to look at it on Sunday I'll get back in touch with you if it's not as advertised.

Okay, just keep me posted about how you come out. Jay

[mikeEboy]

Are these still available? If so, I would like one.