TX WTB Tall Oil Fill Tube with Cap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rich72C10 · 02-28-2021, 01:19 PM

I'd like to find/buy for my C10 SBC 350 one of these tall oil fill tubes with cap, grommet, and mounting screw. Anyone out there have one to sell?

CG · 02-28-2021, 01:27 PM

https://67-72chevytrucks.com/vboard/...d.php?t=818793

Rich72C10 · 02-28-2021, 01:32 PM

ouch, didn't know they were that pricey now days.

**Classic Bowties** · 02-28-2021, 02:19 PM

We have a couple of these oil filler tubes pulled/ready to ship and cost would be $75. + shipping, I am also pretty sure that we still have the extension tube to valve cover rubber mounting grommet in GM NOS available too. Will go have a look now and get you some pics. Mel

Rich72C10 · 02-28-2021, 02:32 PM

Thanks - look forward seeing the photos! I assume that would come with a cap too?

Currently I have a metal cap, which is on the backside of the valve cover on the driver's side. Forward of this is the PVC. On the passenger side there is a line going from the back of the cover to the carburetor "hat" that the breather sits on.

It seems, from reading different threads a A/C Truck with Power Breaks has the tall filler tube, other wise it's a rubber cap for 72s. So I have neither, a tall filler tube (which would be welcomed) nor a rubber cap.

Now my cover is slotted for for my metal cap - might you know if the grommet / tube will fit okay? Meaning am I putting myself up for problems with the "slotted" hole that fits my cap.

**Classic Bowties** · 03-01-2021, 02:17 PM

Quote:

Originally Posted by Rich72C10

Thanks - look forward seeing the photos! I assume that would come with a cap too?

Currently I have a metal cap, which is on the backside of the valve cover on the driver's side. Forward of this is the PVC. On the passenger side there is a line going from the back of the cover to the carburetor "hat" that the breather sits on.

It seems, from reading different threads a A/C Truck with Power Breaks has the tall filler tube, other wise it's a rubber cap for 72s. So I have neither, a tall filler tube (which would be welcomed) nor a rubber cap.

Now my cover is slotted for for my metal cap - might you know if the grommet / tube will fit okay? Meaning am I putting myself up for problems with the "slotted" hole that fits my cap.

Hello, we sorted/pulled these oil filler extension tube parts out and listed them in the below linked f/s thread, have given you an option/first call on one of the setups, please confirm interest or a pass in that thread. As for your questions, these oil filler extension tubes were found/used on the 71-72 small blocks with the rubber push in style oil filler caps, if your truck is a 72 the valve cover should have a perfectly round hole only (no notches) for a push in style cap. Thanks, Mel

http://67-72chevytrucks.com/vboard/s...d.php?t=818966
.

Rich72C10 · 03-01-2021, 03:15 PM

looks like I cannot "upgrade" to this Fill Tube because my valve cover is slotted for a metal cap - BOOO!

**Classic Bowties** · 03-01-2021, 03:44 PM

Quote:

Originally Posted by Rich72C10

looks like I cannot "upgrade" to this Fill Tube because my valve cover is slotted for a metal cap - BOOO!

If wishing to bring your truck back to original, you can always search/locate an OE 71-72 style valve cover with the push in rubber fill cap/plug. It's a fairly simple process, locate and install the OE 72 valve cover, remove the fill cap, install rubber tube grommet into valve cover cap hole then push oil filler extension tube into grommet and now sit back and enjoy the easy oil fill life... Mel

02-28-2021, 01:19 PM	#1
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	WTB Tall Oil Fill Tube with Cap I'd like to find/buy for my C10 SBC 350 one of these tall oil fill tubes with cap, grommet, and mounting screw. Anyone out there have one to sell? Attached Images __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| Upgraded Fully Super Trim Last edited by Rich72C10; 02-28-2021 at 01:24 PM.*

02-28-2021, 01:27 PM	#2
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,035	Re: WTB Tall Oil Fill Tube with Cap https://67-72chevytrucks.com/vboard/...d.php?t=818793 __________________ … … … … … … … … ... … … … … … … … … … … …

02-28-2021, 01:32 PM	#3
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	Re: WTB Tall Oil Fill Tube with Cap ouch, didn't know they were that pricey now days. __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim

02-28-2021, 02:19 PM	#4
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,764	Re: WTB Tall Oil Fill Tube with Cap We have a couple of these oil filler tubes pulled/ready to ship and cost would be $75. + shipping, I am also pretty sure that we still have the extension tube to valve cover rubber mounting grommet in GM NOS available too. Will go have a look now and get you some pics. Mel

02-28-2021, 02:32 PM	#5
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	Re: WTB Tall Oil Fill Tube with Cap Thanks - look forward seeing the photos! I assume that would come with a cap too? Currently I have a metal cap, which is on the backside of the valve cover on the driver's side. Forward of this is the PVC. On the passenger side there is a line going from the back of the cover to the carburetor "hat" that the breather sits on. It seems, from reading different threads a A/C Truck with Power Breaks has the tall filler tube, other wise it's a rubber cap for 72s. So I have neither, a tall filler tube (which would be welcomed) nor a rubber cap. Now my cover is slotted for for my metal cap - might you know if the grommet / tube will fit okay? Meaning am I putting myself up for problems with the "slotted" hole that fits my cap. __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim

03-01-2021, 03:15 PM	#7
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	Re: WTB Tall Oil Fill Tube with Cap looks like I cannot "upgrade" to this Fill Tube because my valve cover is slotted for a metal cap - BOOO! __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.