Recommendations for Power Steering rack & Pinion kit for 64 C10

[CanadianWolfpack]

I have a 1964 C10 with the old steering box. Who has installed an after market power steering rack and pinion kit ? The most common thing i have heard is that the turning radius is limited when installing. Have you installed one, name brand and what issues did you run into.



Greatly appreciate any help

[88Stanger]

Originally Posted by CanadianWolfpack

I have a 1964 C10 with the old steering box. Who has installed an after market power steering rack and pinion kit ? The most common thing i have heard is that the turning radius is limited when installing. Have you installed one, name brand and what issues did you run into.



Greatly appreciate any help

I have installed a power rack system from POL - It is shown in my build thread and it is a direct bolt in kit. i have not used or tested it yet, but the install was super easy simple once i stopped trying to make it so much more difficult.

[88Stanger]

look in here

http://67-72chevytrucks.com/vboard/s...d.php?t=792565

around Post 131 - page 5 or 6

[aggie91]

I used the No Limit Engineering power rack. No complaints with mine. If the turning radius was reduced, it was not enough that I noticed it as a problem.

http://nolimit.net/products#!/C-10-P...tegory=6157532

[shsahs]

Originally Posted by aggie91

I used the No Limit Engineering power rack. No complaints with mine. If the turning radius was reduced, it was not enough that I noticed it as a problem.

http://nolimit.net/products#!/C-10-P...tegory=6157532

You state, "the turning radius was reduced". In their very small description they state it delivers a full turn radius.

These power units deliver a full turn radius in only 2-3/4 turns lock to lock.

I have been looking at these myself and that has been a concern I had.

[SCOTI]

Originally Posted by shsahs

You state, "the turning radius was reduced". In their very small description they state it delivers a full turn radius. I have been looking at these myself and that has been a concern I had.

That's not what I read....

Originally Posted by aggie91

I used the No Limit Engineering power rack. No complaints with mine. If the turning radius was reduced, it was not enough that I noticed it as a problem.

[shsahs]

Originally Posted by SCOTI

That's not what I read....

Ahh good point. See what reading in a hurry gets me.
Posted via Mobile Device