Auto transmission linkage - The 1947 - Present Chevrolet & GMC Truck Message Board Network

duke10 · 03-13-2021, 11:08 AM

So my connection on my linkage came apart yesterday.
Which parts need to come off or be loosened to get it back together?
I have looked all over the sight and can’t seem to figure it out.
Thanks for any assistance
Posted via Mobile Device

**pjmoreland** · 03-13-2021, 11:26 AM

Boog posted an image of the complete assembly in this thread.

http://67-72chevytrucks.com/vboard/s...d.php?t=810833

The linkage in your photo should be underneath the other end of the spring.

duke10 · 03-13-2021, 11:54 AM

So underneath the spring and it just slips over the other end?
Thanks PJ.

**pjmoreland** · 03-13-2021, 11:55 AM

Yep, it just slips over the other end

duke10 · 03-13-2021, 01:02 PM

Does it need go be in neutral to do this or does it matter?

**HO455** · 03-13-2021, 02:06 PM

Not the best photo, but it may help. It doesn't matter what gear you're in when you assemble it as long as the rest of the linkages are okay. I seem to remember moving it to make it easier to work on, but I don't remember what gear had it in.

duke10 · 03-13-2021, 04:26 PM

New pin, tightened everything up and it seems to work fine.
Thank you for the help.

03-13-2021, 11:08 AM	#1
duke10 Active Member Join Date: Aug 2003 Location: san diego Posts: 833	Auto transmission linkage So my connection on my linkage came apart yesterday. Which parts need to come off or be loosened to get it back together? I have looked all over the sight and can’t seem to figure it out. Thanks for any assistance Posted via Mobile Device Attached Images

03-13-2021, 11:26 AM	#2
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 6,011	Re: Auto transmission linkage Boog posted an image of the complete assembly in this thread. http://67-72chevytrucks.com/vboard/s...d.php?t=810833 The linkage in your photo should be underneath the other end of the spring.

03-13-2021, 11:54 AM	#3
duke10 Active Member Join Date: Aug 2003 Location: san diego Posts: 833	Re: Auto transmission linkage So underneath the spring and it just slips over the other end? Thanks PJ.

03-13-2021, 11:55 AM	#4
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 6,011	Re: Auto transmission linkage Yep, it just slips over the other end

03-13-2021, 01:02 PM	#5
duke10 Active Member Join Date: Aug 2003 Location: san diego Posts: 833	Re: Auto transmission linkage Does it need go be in neutral to do this or does it matter?

03-13-2021, 02:06 PM	#6
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,393	Re: Auto transmission linkage Not the best photo, but it may help. It doesn't matter what gear you're in when you assemble it as long as the rest of the linkages are okay. I seem to remember moving it to make it easier to work on, but I don't remember what gear had it in. Attached Images __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

03-13-2021, 04:26 PM	#7
duke10 Active Member Join Date: Aug 2003 Location: san diego Posts: 833	Re: Auto transmission linkage New pin, tightened everything up and it seems to work fine. Thank you for the help.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.