|
04-01-2021, 11:03 AM
|
#1 |
|
Registered User
Join Date: Feb 2013
Location: Columbus, MS
Posts: 445
|
upper mount
Suspension guru's-
Can these OEM upper shock mounts on the rear of my Apache be relocated to the inside of the frame and used as rear upper coilover mounts? Pros/Cons? |
|
|
|
04-01-2021, 05:40 PM
|
#2 |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,064
|
Re: upper mount
Technically yes they could be relocated & re-purposed. I would only do it if the bracket material is @ least frame thickness @ a minimum.
The relocation fab work needs to be done well to support the spring & shock load(s).
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
|
04-06-2021, 10:27 AM
|
#3 | |
|
Registered User
Join Date: Feb 2013
Location: Columbus, MS
Posts: 445
|
Re: upper mount
Quote:
The 60-62 OEM shock bracket is extremely stout so I'm pretty sure it'll do the job. I'm interested in a 20 x 12 rear wheel with a Mickey Thompson 6620 (nearly 15 inch section width) but it won't fit with the stock outboard shock configuration. The other alternative is to use a frame crossbar with shock tabs welded on. Just brainstorming for now. Thanks again. |
|
|
|
|
|
04-07-2021, 04:38 PM
|
#4 |
|
Senior Member
 Join Date: Mar 2003
Location: Colfax-California
Posts: 8,628
|
Re: upper mount
factory shocks mounts were not intended to support vehicle weight. With that being said I would fab up something different with a double shear
|
|
|
|
|
04-07-2021, 07:31 PM
|
#5 | |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,064
|
Re: upper mount
Quote:
Correct me if I'm missing something. Since he would be relocating them inboard, they shouldn't be attached like that exact OE arrangement any longer but could still possibly be made to work as needed if the material thickness is enough. There's many a C/O mount/tabs out there @ .188" thick material. IMHO, it's prob easier to make something from scratch & upsize material to .250" but that wasn't the question he asked. I get that some guys like to repurpose things if/when possible.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
|
|
04-12-2021, 01:02 PM
|
#6 | |
|
Registered User
Join Date: Feb 2013
Location: Columbus, MS
Posts: 445
|
Re: upper mount
Quote:
|
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
