measurement for 71DG4 door mirrors - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Jeff's bowtie's** · 04-18-2021, 11:34 AM

Can someone help with the measurements for the 71 DG4 mirrors?
I need the top factory measurements for the R&L door top bolt holes from the front edge of the door and from the body line down thanks in advance

**FirstOwner69** · 04-18-2021, 02:06 PM

Does this help? I thought I had pictures with tape measures, but no luck. I believe both doors are the same.

**FirstOwner69** · 04-18-2021, 04:06 PM

I found the pics of my '69. The doors and holes are factory original to the truck. All are of the driver's door. The holes are "production line close" to the assembly manual page I posted above.

**Jeff's bowtie's** · 04-18-2021, 11:31 PM

Thanks for the measurements! Now I can mount the mirrors!! This was a 2WD C/10 and I put it on a 72 K/20 frame with Dana 60f front and 14 bolt rear out of a 88 K/30 crewcab

04-18-2021, 11:34 AM	#1
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,955	measurement for 71DG4 door mirrors Can someone help with the measurements for the 71 DG4 mirrors? I need the top factory measurements for the R&L door top bolt holes from the front edge of the door and from the body line down thanks in advance

04-18-2021, 02:06 PM	#2
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,852	Re: measurement for 71DG4 door mirrors Does this help? I thought I had pictures with tape measures, but no luck. I believe both doors are the same. Attached Images __________________ Jim

04-18-2021, 04:06 PM	#3
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,852	Re: measurement for 71DG4 door mirrors I found the pics of my '69. The doors and holes are factory original to the truck. All are of the driver's door. The holes are "production line close" to the assembly manual page I posted above. Attached Images __________________ Jim Last edited by FirstOwner69; 04-18-2021 at 05:41 PM.

04-18-2021, 11:31 PM	#4
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,955	Re: measurement for 71DG4 door mirrors Thanks for the measurements! Now I can mount the mirrors!! This was a 2WD C/10 and I put it on a 72 K/20 frame with Dana 60f front and 14 bolt rear out of a 88 K/30 crewcab Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.