CA WTB Nice sets of Window Cranks and inner door handle levers.

[72 Jimmy Power]

Hi, Looking for a nice set of original window cranks with the black roll up knob and also inner door handle levers both with nice threads. Thank you. 1972 style.

[BigBird05]

I bought a set off of EBAY. They were Volvo #G7743519. They look just like GM interior door handles.

[CS1972]

This is MY experience with those Volvo door handles:

Yes, they do look exactly like the GM factory ones. Yes they're inexpensive. However, the 2 sealed in plastic with Volvo on the bag as well as the part # G7743519 did not fit on either of my shafts (which appear to be original). At first I thought I simply needed to apply some force to get it over the clip, but after removing the clip I still could not get it on. My shaft grooves were not the problem either, both driver and passenger sides are fine. The old handles went on / off easy. As a test we removed a handle from my brothers truck and that one went on/off easily (without the clip, since it was just a test to see if the splines were good). So I must conclude it's the Volvo door handles and not my truck, in my humble opinion.

The ad says it fits:
1968-72 Chevelle
1968-72 Chevrolet/GMC Pickup, Blazer/Jimmy, Suburban
1968-70 Full Size 4-Door
1968-74 Chevy II/Nova 4-Door (except Nova Custom)
Like handled Volvo Trucks

I went to re-look at the ad and I select "1972 Chevrolet K10" in "My Garage" and it comes back and says "This part is not compatible with this 1972 Chevrolet K10 Pickup Base 5.7L 350Cu. In.".

So, just be aware.

If someone wants mine to test on their truck I offer them up for free, all I ask is you pay shipping.

[jimmy70]

Cliff, let me check / I should have a few sets. Get back with you tomorrow evening. marko

[72 Jimmy Power]

Thanks Marko!!