ID SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Willys_MB · 06-15-2021, 01:39 PM

I have two sets of exhaust manifolds for sale.

The first set is a sandblasted set of 4x4 exhaust manifolds. The studs look good except for one has broken off, but if I was going to use them, I would replace the studs before installing them since they're already out of the truck. I don't see any rust or serious issues. I'm looking for $100 + shipping and fees, but I'm open to reasonable offers.

The second set were on my 1968 GMC C2500's original 327 when I got the truck before I installed some aftermarket cera-coated manifolds. The driver's side appears to be original, but the alternator mounting hole had a bolt snap off in there. I went to the later style alternator mount when I was doing some engine work and didn't need to worry about trying to get the bolt out. The passenger side is an aftermarket manifold. If there's no interest in the set, I don't have a problem tossing the aftermarket manifold into the scrap pile if someone wants to buy the other one, but it's still certainly useable. As with the other set, I don't see any cracks or issues, but I would definitely replace the studs before I installed them on my truck. I'm looking for $35 + shipping and fees, but I'm open to reasonable offers.

Willys_MB · 06-15-2021, 01:41 PM

Pics of first set

Willys_MB · 06-15-2021, 01:44 PM

Pics of second set

**tim71** · 06-15-2021, 05:46 PM

Could I get a shipping quote to 46112 for set 1, the 4x4 exhaust manifolds.

Willys_MB · 06-15-2021, 05:47 PM

Absolutely. I will get back to you tomorrow with some numbers.

Cheers,
Nathan.

52napco · 06-15-2021, 09:32 PM

Do you have the tins for heat riser off drivers side ?

Willys_MB · 06-16-2021, 04:31 PM

Quote:

Originally Posted by tim71

Could I get a shipping quote to 46112 for set 1, the 4x4 exhaust manifolds.

I think I can fit them in a large flat rate box from the USPS, so that's $21.90 for shipping. That brings the grand total to $126 including shipping and fees.

Willys_MB · 06-16-2021, 04:33 PM

Quote:

Originally Posted by 52napco

Do you have the tins for heat riser off drivers side ?

I don't believe so. If you're looking for what's in this posting, definitely not.

https://67-72chevytrucks.com/vboard/...ght=heat+riser

**tim71** · 06-16-2021, 08:06 PM

Quote:

Originally Posted by Willys_MB

I think I can fit them in a large flat rate box from the USPS, so that's $21.90 for shipping. That brings the grand total to $126 including shipping and fees.

I'll take them, please PM me your PayPal address. Thanks, Tim

Willys_MB · 06-17-2021, 07:47 AM

Quote:

Originally Posted by tim71

I'll take them, please PM me your PayPal address. Thanks, Tim

The sandblasted 4x4 set has been sold to Tim. PM coming.

**tim71** · 06-17-2021, 12:38 PM

Quote:

Originally Posted by Willys_MB

The sandblasted 4x4 set has been sold to Tim. PM coming.

Payment sent. Also sent you a PM.

Thanks, Tim

Willys_MB · 06-19-2021, 05:36 PM

Second set still for sale. I’m willing to split it up since most people probably don’t want the aftermarket manifold.

Willys_MB · 06-24-2021, 04:12 PM

bump

Willys_MB · 07-29-2021, 10:33 AM

second set now $35+shipping. I'll give it a week before I toss them in the scrap pile

Willys_MB · 07-30-2021, 10:34 AM

open to offers, I'd hate to throw the original manifold in the scrap pile

Willys_MB · 08-01-2021, 10:38 AM

Bump. Open to offers

68Gold/white · 08-01-2021, 07:11 PM

I will take 2nd set.
I don't use paypal
Can send check or money order
PM me if this is OK
THanks
Jeff

Willys_MB · 08-02-2021, 11:06 AM

that’s fine with me. I’m dealing with a family emergency right now, but I will get to you as soon as I can

68Gold/white · 08-02-2021, 12:05 PM

Quote:

Originally Posted by Willys_MB

that’s fine with me. I’m dealing with a family emergency right now, but I will get to you as soon as I can

NO rush on your end, take as long as you need!!! Praying for you!!!

Willys_MB · 08-12-2021, 10:35 AM

Quote:

Originally Posted by 68Gold/white

NO rush on your end, take as long as you need!!! Praying for you!!!

Thank you so much for being understanding. Things are just about back to normal now. Can you please PM me your address so I can get a quote for shipping?

Willys_MB · 08-13-2021, 09:05 PM

Still waiting to hear back. I sent you a PM

06-15-2021, 01:39 PM	#1
Willys_MB Registered User Join Date: Apr 2017 Location: Boise, ID Posts: 856	SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968 I have two sets of exhaust manifolds for sale. The first set is a sandblasted set of 4x4 exhaust manifolds. The studs look good except for one has broken off, but if I was going to use them, I would replace the studs before installing them since they're already out of the truck. I don't see any rust or serious issues. I'm looking for $100 + shipping and fees, but I'm open to reasonable offers. The second set were on my 1968 GMC C2500's original 327 when I got the truck before I installed some aftermarket cera-coated manifolds. The driver's side appears to be original, but the alternator mounting hole had a bolt snap off in there. I went to the later style alternator mount when I was doing some engine work and didn't need to worry about trying to get the bolt out. The passenger side is an aftermarket manifold. If there's no interest in the set, I don't have a problem tossing the aftermarket manifold into the scrap pile if someone wants to buy the other one, but it's still certainly useable. As with the other set, I don't see any cracks or issues, but I would definitely replace the studs before I installed them on my truck. I'm looking for $35 + shipping and fees, but I'm open to reasonable offers. __________________ 1968 GMC C2500 Long Bed Fleetside Last edited by Willys_MB; 07-29-2021 at 10:34 AM.

06-15-2021, 01:41 PM	#2
Willys_MB Registered User Join Date: Apr 2017 Location: Boise, ID Posts: 856	Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968 Pics of first set Attached Images __________________ 1968 GMC C2500 Long Bed Fleetside

06-15-2021, 01:44 PM	#3
Willys_MB Registered User Join Date: Apr 2017 Location: Boise, ID Posts: 856	Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968 Pics of second set Attached Images __________________ 1968 GMC C2500 Long Bed Fleetside

06-15-2021, 05:46 PM	#4
tim71 Senior Member Join Date: Oct 2015 Location: Brownsburg, IN Posts: 1,106	Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968 Could I get a shipping quote to 46112 for set 1, the 4x4 exhaust manifolds. __________________ 1972 Blazer Highlander 1971 GMC K1500 SWB (sold) 2004 Corvette Z06 CE

06-15-2021, 05:47 PM	#5
Willys_MB Registered User Join Date: Apr 2017 Location: Boise, ID Posts: 856	Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968 Absolutely. I will get back to you tomorrow with some numbers. Cheers, Nathan. __________________ 1968 GMC C2500 Long Bed Fleetside

06-15-2021, 09:32 PM	#6
52napco Registered User Join Date: Jun 2014 Location: upstate sc Posts: 2,095	Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968 Do you have the tins for heat riser off drivers side ?

06-19-2021, 05:36 PM	#12
Willys_MB Registered User Join Date: Apr 2017 Location: Boise, ID Posts: 856	Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968 Second set still for sale. I’m willing to split it up since most people probably don’t want the aftermarket manifold. __________________ 1968 GMC C2500 Long Bed Fleetside

06-24-2021, 04:12 PM	#13
Willys_MB Registered User Join Date: Apr 2017 Location: Boise, ID Posts: 856	Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968 bump __________________ 1968 GMC C2500 Long Bed Fleetside

07-29-2021, 10:33 AM	#14
Willys_MB Registered User Join Date: Apr 2017 Location: Boise, ID Posts: 856	Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968 second set now $35+shipping. I'll give it a week before I toss them in the scrap pile __________________ 1968 GMC C2500 Long Bed Fleetside

07-30-2021, 10:34 AM	#15
Willys_MB Registered User Join Date: Apr 2017 Location: Boise, ID Posts: 856	Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968 open to offers, I'd hate to throw the original manifold in the scrap pile __________________ 1968 GMC C2500 Long Bed Fleetside

08-01-2021, 10:38 AM	#16
Willys_MB Registered User Join Date: Apr 2017 Location: Boise, ID Posts: 856	Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968 Bump. Open to offers __________________ 1968 GMC C2500 Long Bed Fleetside

08-01-2021, 07:11 PM	#17
68Gold/white Registered User Join Date: Sep 2011 Location: Ark City, Kansas Posts: 3,411	Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968 I will take 2nd set. I don't use paypal Can send check or money order PM me if this is OK THanks Jeff

08-02-2021, 11:06 AM	#18
Willys_MB Registered User Join Date: Apr 2017 Location: Boise, ID Posts: 856	Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968 that’s fine with me. I’m dealing with a family emergency right now, but I will get to you as soon as I can __________________ 1968 GMC C2500 Long Bed Fleetside

08-13-2021, 09:05 PM	#21
Willys_MB Registered User Join Date: Apr 2017 Location: Boise, ID Posts: 856	Re: SBC Exhaust Manifolds (2 Sets) - 4x4 and 1968 Still waiting to hear back. I sent you a PM __________________ 1968 GMC C2500 Long Bed Fleetside



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.