Jimmy camper is out again... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 07-17-2021, 09:40 PM

Had our local car show coming up and decided i would spend some time on the jimmy camper and bring it up to the show. The people that understand what it is like it, but most people think it is a short bed with a slide in camper.

Got the console put back together. Too bad about the big hole in it, but i see what the PO had there...

Does any one repro the rubber boot for this transfer case?

**too much stuff** · 07-17-2021, 09:43 PM

Found some more NOS goodies in back. I haven't looked up the first part, anyone recognize it?

**too much stuff** · 07-17-2021, 09:44 PM

At the show. More car show pics in general discussion.
Enjoy

Bones72Super · 07-17-2021, 09:50 PM

That rig is Super cool! Love the slots too

**too much stuff** · 07-17-2021, 10:07 PM

Quote:

Originally Posted by Bones72Super

That rig is Super cool! Love the slots too

Thanks. The slots are 6 lug by 16.5. 8 ply duralon tires that are probably 20-30 years old. Ride like a hockey puck...

Thought i had a couple more pics here... guess i may have to take a couple more tomorrow.

**Joesjunk** · 07-17-2021, 10:41 PM

That’s a pretty cool looking rig

Awann99 · 07-18-2021, 12:07 AM

That is super cool. I’ve never seen one of those. You should post some interior pictures of the camper.

**Chevyland** · 07-18-2021, 12:15 AM

Quote:

Originally Posted by Awann99

That is super cool. I’ve never seen one of those. You should post some interior pictures of the camper.

X2
Curious to see how they laid that out

**'68OrangeSunshine** · 07-18-2021, 01:00 AM

I think the goodie in pic#3 is a Spare Tire Holder. The kind that goes behind the back seat.
Either that or it's a rotocoil gyrostabilizer brace for the flux capacitor intercooler.

best view · 07-18-2021, 08:31 AM

Now thats funny

**too much stuff** · 07-18-2021, 10:41 AM

Quote:

Originally Posted by '68OrangeSunshine

I think the goodie in pic#3 is a Spare Tire Holder. The kind that goes behind the back seat.
Either that or it's a rotocoil gyrostabilizer brace for the flux capacitor intercooler.

For sure not a tire holder or brace for the intercooler. Book shows a plenum LH side?

**'68OrangeSunshine** · 07-18-2021, 07:11 PM

Quote:

Originally Posted by too much stuff

For sure not a tire holder or brace for the intercooler. Book shows a plenum LH side?

Then run the numbers. There's a GM p/n taped to the piece. That should lead you somewhere.

**Getter-Done** · 07-18-2021, 07:25 PM

Quote:

Originally Posted by too much stuff

Had our local car show coming up and decided i would spend some time on the jimmy camper and bring it up to the show. The people that understand what it is like it, but most people think it is a short bed with a slide in camper.

Got the console put back together. Too bad about the big hole in it, but i see what the PO had there...

Does any one repro the rubber boot for this transfer case?

I have had to make boots out of ones that where available in the past.

Here is one that may work for you???

Link:https://autoplicity.com/3322543-crow...e%20components

Name: boot.jpg
Views: 406
Size: 45.4 KB

.

**too much stuff** · 07-18-2021, 08:45 PM

Quote:

Originally Posted by Awann99

That is super cool. I’ve never seen one of those. You should post some interior pictures of the camper.

I will try to get some more pics this week.

Quote:

Originally Posted by Chevyland

X2
Curious to see how they laid that out

See above response.

Quote:

Originally Posted by '68OrangeSunshine

Then run the numbers. There's a GM p/n taped to the piece. That should lead you somewhere.

I looked it up in my book and it shows LH plenum cowl. That is from my gmc master book. I will try to get a better pic.

Quote:

Originally Posted by Getter-Done

I have had to make boots out of ones that where available in the past.

Here is one that may work for you???

Link:https://autoplicity.com/3322543-crow...e%20components

Attachment 2115142

.

I will check into it. Thanks.

**MJN** · 07-19-2021, 08:16 AM

Part 3882495 is a RH Plenum filler panel for '67-'72 Medium Duty trucks. #30 in the diagram

LT7A · 07-19-2021, 10:56 AM

That's a neat rig!

**'68OrangeSunshine** · 07-19-2021, 04:28 PM

Classic Industries has your shifter boot:
www.classicindustries.com
P/n: CX-1902.... 67-72 4X4 Transfer Case.....$20.99

Rich72C10 · 07-19-2021, 05:00 PM

I think a camper shell would be cool to have, though I am not sure what I'd need to do to my C10 LWB to handle it. Though I doubt I'd ever find a camper shell to even try to install one!

07-17-2021, 09:40 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Jimmy camper is out again... Had our local car show coming up and decided i would spend some time on the jimmy camper and bring it up to the show. The people that understand what it is like it, but most people think it is a short bed with a slide in camper. Got the console put back together. Too bad about the big hole in it, but i see what the PO had there... Does any one repro the rubber boot for this transfer case? Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

07-17-2021, 09:43 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: Jimmy camper is out again... Found some more NOS goodies in back. I haven't looked up the first part, anyone recognize it? Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

07-17-2021, 09:50 PM	#4
Bones72Super Registered User Join Date: Sep 2017 Location: Lake Travis,Texas Posts: 769	Re: Jimmy camper is out again... That rig is Super cool! Love the slots too __________________ WTB 71-72 Original paint Medium Red hood WTB 1972 Very nice original Parchment seat belt set

07-17-2021, 10:41 PM	#6
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,709	Re: Jimmy camper is out again... That’s a pretty cool looking rig __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

07-18-2021, 12:07 AM	#7
Awann99 Registered User Join Date: Jan 2018 Location: TN Posts: 263	Re: Jimmy camper is out again... That is super cool. I’ve never seen one of those. You should post some interior pictures of the camper.

07-17-2021, 09:44 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: Jimmy camper is out again... At the show. More car show pics in general discussion. Enjoy Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

07-18-2021, 01:00 AM	#9
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,509	Re: Jimmy camper is out again... I think the goodie in pic#3 is a Spare Tire Holder. The kind that goes behind the back seat. Either that or it's a rotocoil gyrostabilizer brace for the flux capacitor intercooler. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.

07-18-2021, 08:31 AM	#10
best view Registered User Join Date: Apr 2009 Location: newbury new hampsire Posts: 2,162	Re: Jimmy camper is out again... Now thats funny

07-19-2021, 08:16 AM	#15
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,051	Re: Jimmy camper is out again... Part 3882495 is a RH Plenum filler panel for '67-'72 Medium Duty trucks. #30 in the diagram Attached Images __________________ '51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com

07-19-2021, 10:56 AM	#16
LT7A Registered User Join Date: Oct 2015 Location: PNW Posts: 3,627	Re: Jimmy camper is out again... That's a neat rig!

07-19-2021, 04:28 PM	#17
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,509	Re: Jimmy camper is out again... Classic Industries has your shifter boot: www.classicindustries.com P/n: CX-1902.... 67-72 4X4 Transfer Case.....$20.99 __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.

07-19-2021, 05:00 PM	#18
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	Re: Jimmy camper is out again... I think a camper shell would be cool to have, though I am not sure what I'd need to do to my C10 LWB to handle it. Though I doubt I'd ever find a camper shell to even try to install one! __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.