Any Audio Geniuses out there? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

brian1115 · 07-21-2021, 10:00 AM

Trying to put a Retro sound system in my truck. The wiring diagram shows 4 speaker outputs. 2 for the front and 2 for the rear. I have 5 speakers going into the truck though, 2 small at the dash, 1 center dash, and 2 rear corners.

How do I hook this up?

blazer2007 · 07-21-2021, 10:37 AM

most of the geniuses' are over on the stereo section, might have better luck over there. It is with the electrical

SunSoaked · 07-21-2021, 10:52 AM

Generally. when using a single speaker as a "center channel" for staging effect you hook up the LF pos to the speakers pos and the RF neg to the speakers neg.

brian1115 · 07-21-2021, 11:38 AM

Quote:

Originally Posted by blazer2007

most of the geniuses' are over on the stereo section, might have better luck over there. It is with the electrical

ok I'll try that thanks

**smupser** · 07-22-2021, 10:50 AM

Quote:

Originally Posted by SunSoaked

Generally. when using a single speaker as a "center channel" for staging effect you hook up the LF pos to the speakers pos and the RF neg to the speakers neg.

^^^this

07-21-2021, 10:00 AM	#1
brian1115 Registered User Join Date: Apr 2015 Location: Richmond Hill Ontario Canada Posts: 48	Any Audio Geniuses out there? Trying to put a Retro sound system in my truck. The wiring diagram shows 4 speaker outputs. 2 for the front and 2 for the rear. I have 5 speakers going into the truck though, 2 small at the dash, 1 center dash, and 2 rear corners. How do I hook this up? __________________ 1986 Chevy Fleetside Wrangler (Canadian Only)

07-21-2021, 10:37 AM	#2
blazer2007 Registered User Join Date: Jan 2007 Location: vernon b.c. Posts: 3,022	Re: Any Audio Geniuses out there? most of the geniuses' are over on the stereo section, might have better luck over there. It is with the electrical

07-21-2021, 10:52 AM	#3
SunSoaked Registered User Join Date: Dec 2011 Location: Yuma Arizona Posts: 1,525	Re: Any Audio Geniuses out there? Generally. when using a single speaker as a "center channel" for staging effect you hook up the LF pos to the speakers pos and the RF neg to the speakers neg.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.