PA Another blazer going under the knife - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1rippen6** · 08-16-2021, 05:57 PM

The blazer is rough and not much left, keeping the windshield frame. Top was busted while loading so patches available 2 ft x 2 ft 40 plus shipping. Frame is junk so most brackets will be available.

Rear seat channel decent 80 plus shipping

Front seat channel if nice 250 plus shipping, if not nice it will depend on condition.

Emblems 30 plus shipping

Motor w/ accessories 600 plus shipping

Tranny and transfer 400 with shifter and linkage plus shipping, I will separate.

Anything else just ask.

**jimmy70** · 08-16-2021, 07:06 PM

Any t'case skid plate cross member?

**1rippen6** · 08-16-2021, 07:08 PM

Quote:

Originally Posted by jimmy70

Any t'case skid plate cross member?

Yes, there is but I won't know condition until I get it removed , you will be first in line.

**Orange71shorty** · 08-16-2021, 07:48 PM

Any hatch latches or rear seat hold down brackets?

**1rippen6** · 08-16-2021, 08:11 PM

Quote:

Originally Posted by Orange71shorty

Any hatch latches or rear seat hold down brackets?

Sorry, hatch was gutted and no rear seat.

**1rippen6** · 08-16-2021, 08:12 PM

Quote:

Originally Posted by Orange71shorty

Any hatch latches or rear seat hold down brackets?

If you have hatch latches that aren't working, I rebuild them, there should be a thread on here somewhere.

**Eagle9502** · 08-16-2021, 08:49 PM

4wd auto shift linkage from column to transmission and frame pivot bracket?

**1rippen6** · 08-16-2021, 08:57 PM

Quote:

Originally Posted by Eagle9502

4wd auto shift linkage from column to transmission and frame pivot bracket?

The frame and transmission brackets are there but I robbed the rod from the column for another project. Let me know if interested in those 2 and I'll get some pictures.

**Eagle9502** · 08-16-2021, 09:00 PM

I’m interested. Thanks

**Orange71shorty** · 08-16-2021, 10:30 PM

Quote:

Originally Posted by 1rippen6

If you have hatch latches that aren't working, I rebuild them, there should be a thread on here somewhere.

Thanks but mine are missing altogether

**Sand Wrench** · 08-16-2021, 11:26 PM

Exhaust hanger bracket?

**1rippen6** · 08-16-2021, 11:40 PM

Quote:

Originally Posted by Sand Wrench

Exhaust hanger bracket?

Long one on the frame? If so, I have several of those cut off already. Short one, I will have to look, that one seems to rust out the most.

**1rippen6** · 08-17-2021, 05:29 PM

Here are the long ones

**Tmend** · 08-18-2021, 07:52 PM

Quote:

Originally Posted by Orange71shorty

Any hatch latches or rear seat hold down brackets?

Hello sir.
Dwayne completed some for me recently. I’d sell you the pair of hatch latches if still in need of some. $185 shipped

**1rippen6** · 08-18-2021, 08:40 PM

Quote:

Originally Posted by Eagle9502

I’m interested. Thanks

Here is what is left, 50 plus shipping, they may fit in a flat rate padded envelope.

**lks dcvn** · 08-19-2021, 09:18 AM

How is the lower trim? Any missing pieces? Driver quality? Hard to tell - is it woodgrain or the black strip option?

**1rippen6** · 08-19-2021, 09:24 AM

Quote:

Originally Posted by lks dcvn

How is the lower trim? Any missing pieces? Driver quality? Hard to tell - is it woodgrain or the black strip option?

It's not even worth removing,.

**lks dcvn** · 08-20-2021, 10:15 AM

Got it - thank you!

**Sand Wrench** · 08-20-2021, 01:32 PM

Quote:

Originally Posted by 1rippen6

Here are the long ones

Interested in both, PM sent.

**1rippen6** · 08-20-2021, 01:59 PM

Quote:

Originally Posted by Sand Wrench

Interested in both, PM sent.

PM returned

**Dave** · 08-21-2021, 08:46 AM

I would be interested in the moulding clips off the doors (the metal and plastic pieces),front fenders and qtrs also please. Lmk thx

**lks dcvn** · 08-21-2021, 10:08 AM

How is the inner/outer grill for wall art?

**1rippen6** · 08-21-2021, 10:58 AM

Outer has a dent, I think the inner is to nice for wall art, lol. It doesn't have any cracks, I di have one with a couple cranks but no missing pieces.

**1rippen6** · 08-21-2021, 11:20 AM

Quote:

Originally Posted by Dave

I would be interested in the moulding clips off the doors (the metal and plastic pieces),front fenders and qtrs also please. Lmk thx

I'll have to look, they may have screwed everything fast, lol

**1rippen6** · 08-21-2021, 11:24 AM

Quote:

Originally Posted by Orange71shorty

Any hatch latches or rear seat hold down brackets?

I found a set of rear seat hold downs in my stash 60 shipped if interested.

08-16-2021, 05:57 PM	#1
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Another blazer going under the knife The blazer is rough and not much left, keeping the windshield frame. Top was busted while loading so patches available 2 ft x 2 ft 40 plus shipping. Frame is junk so most brackets will be available. Rear seat channel decent 80 plus shipping Front seat channel if nice 250 plus shipping, if not nice it will depend on condition. Emblems 30 plus shipping Motor w/ accessories 600 plus shipping Tranny and transfer 400 with shifter and linkage plus shipping, I will separate. Anything else just ask. Attached Images

08-16-2021, 07:06 PM	#2
jimmy70 Senior Member Join Date: Aug 2007 Location: Warren,Michigan Posts: 1,158	Re: Another blazer going under the knife Any t'case skid plate cross member?

08-16-2021, 07:48 PM	#4
Orange71shorty Senior Member Join Date: Feb 2009 Location: Helena, Montana Posts: 616	Re: Another blazer going under the knife Any hatch latches or rear seat hold down brackets?

08-16-2021, 08:49 PM	#7
Eagle9502 Senior Member Join Date: Dec 2015 Location: Brooklet, Georgia Posts: 838	Re: Another blazer going under the knife 4wd auto shift linkage from column to transmission and frame pivot bracket?

08-16-2021, 09:00 PM	#9
Eagle9502 Senior Member Join Date: Dec 2015 Location: Brooklet, Georgia Posts: 838	Re: Another blazer going under the knife I’m interested. Thanks

08-16-2021, 11:26 PM	#11
Sand Wrench Senior Member Join Date: Sep 2016 Location: Garnett, Kansas Posts: 279	Re: Another blazer going under the knife Exhaust hanger bracket? __________________ You ever have one of those mornings where you wake up owning more trucks than you did the night before? 1972 K5 1972 K10 1967 K20 bucket truck

08-17-2021, 05:29 PM	#13
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: Another blazer going under the knife Here are the long ones Attached Images

08-19-2021, 09:18 AM	#16
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,348	Re: Another blazer going under the knife How is the lower trim? Any missing pieces? Driver quality? Hard to tell - is it woodgrain or the black strip option?

08-20-2021, 10:15 AM	#18
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,348	Re: Another blazer going under the knife Got it - thank you!

08-21-2021, 08:46 AM	#21
Dave DND Trucks Join Date: Dec 1999 Location: NW Indiana Posts: 2,397	Re: Another blazer going under the knife I would be interested in the moulding clips off the doors (the metal and plastic pieces),front fenders and qtrs also please. Lmk thx

08-21-2021, 10:08 AM	#22
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,348	Re: Another blazer going under the knife How is the inner/outer grill for wall art?

08-21-2021, 10:58 AM	#23
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: Another blazer going under the knife Outer has a dent, I think the inner is to nice for wall art, lol. It doesn't have any cracks, I di have one with a couple cranks but no missing pieces. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.