WA 16x5 6 lug 4 nub steel wheel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**chev-obsession** · 09-03-2021, 12:13 AM

16x5 6 lug 4 nub steel wheel. Has slanted back… how 3 nub 15” wheels are on back side. Not sure if that matters on a 16” wheel or not. 5/8” valve stem hole. Wheel had a bias ply with inner tube if that helps any. Looks to be in good condition. No bends or dents. Also have another 16” wheel but with the earlier clip style

Asking $50 for the wheel plus shipping. Feel free to make an offer
Posted via Mobile Device

**chev-obsession** · 09-08-2021, 07:55 PM

Ttt
Posted via Mobile Device

**Canuckvetter** · 09-10-2021, 12:16 AM

I need one more to complete my set. Shipping to Canada will be a killer. If you still have it in the spring and the Portland swap is still on I would be interested. I know a lot of conditions lol.

**chev-obsession** · 09-10-2021, 01:13 AM

Quote:

Originally Posted by Canuckvetter

I need one more to complete my set. Shipping to Canada will be a killer. If you still have it in the spring and the Portland swap is still on I would be interested. I know a lot of conditions lol.

Sounds good I can keep that in mind. I usually go down there too but don’t know when it will resume. If you have a US address I can ship to, I can check on it.

**Canuckvetter** · 09-12-2021, 02:09 PM

Quote:

Originally Posted by chev-obsession

Sounds good I can keep that in mind. I usually go down there too but don’t know when it will resume. If you have a US address I can ship to, I can check on it.

We have good friends in Las Vegas and Arizona but with this covid we are not sure we will be driving down again this year too. If we do I will check to see if you still have it. I’m in no panic to have one ASAP. Thanks, Michael

**chev-obsession** · 03-23-2022, 01:29 AM

I will be taking this to the Portland swap meet next week if that interests anyone.

09-03-2021, 12:13 AM	#1
chev-obsession Senior Member Join Date: Jul 2008 Location: kennewick, WA Posts: 1,496	16x5 6 lug 4 nub steel wheel 16x5 6 lug 4 nub steel wheel. Has slanted back… how 3 nub 15” wheels are on back side. Not sure if that matters on a 16” wheel or not. 5/8” valve stem hole. Wheel had a bias ply with inner tube if that helps any. Looks to be in good condition. No bends or dents. Also have another 16” wheel but with the earlier clip style Asking $50 for the wheel plus shipping. Feel free to make an offer Posted via Mobile Device Attached Images Last edited by chev-obsession; 03-23-2022 at 01:28 AM.

09-08-2021, 07:55 PM	#2
chev-obsession Senior Member Join Date: Jul 2008 Location: kennewick, WA Posts: 1,496	Re: 16x5 6 lug 4 nub steel wheel Ttt Posted via Mobile Device

09-10-2021, 12:16 AM	#3
Canuckvetter How did I get this OLD! Join Date: Dec 2014 Location: Lamont County, AB, CANADA Posts: 1,045	Re: 16x5 6 lug 4 nub steel wheel I need one more to complete my set. Shipping to Canada will be a killer. If you still have it in the spring and the Portland swap is still on I would be interested. I know a lot of conditions lol. __________________ 1967 Oshawa built LWB Fleetside. 327,3 OTT, 515 Vermilion, CST, PS, PB, Shoulder Harness, Tach,Vac, Speed Warning, Choke Delete, Manual Throttle, Fawn interior. Dealer installed A/C 04/2015, N34 Rosewood Wheel 06/2023 Members who I have met personally. Metaldoc, chevnkevin, 62 Longbed, 72LHorn, 72MARIO, YBNORML, TBONE1964, Classic Bowties, Chevemall, Dagnabbitt.

03-23-2022, 01:29 AM	#6
chev-obsession Senior Member Join Date: Jul 2008 Location: kennewick, WA Posts: 1,496	Re: 16x5 6 lug 4 nub steel wheel I will be taking this to the Portland swap meet next week if that interests anyone. __________________ 1965 c/10 swb 1969 c/10 lwb



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.