Dana 44 Hub - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mseymour · 09-08-2021, 04:40 PM

I need help locating a replacement hub for our 72 K10, old hub has wallered out stud splines and I cant locate a new one online. Id prefer to find one with race pressed in etc.

Thanks!

**kwmech** · 09-08-2021, 05:56 PM

Pull the seal out and look at the inner bearing number. Should be 603049 if it is I have one in excellent shape. 100.00 plus the ride

k29349 · 09-09-2021, 12:07 AM

ventures_truck_parts.

ebay seller

57taskforce · 09-09-2021, 12:15 AM

Quote:

Originally Posted by mseymour

I need help locating a replacement hub for our 72 K10, old hub has wallered out stud splines and I cant locate a new one online. Id prefer to find one with race pressed in etc.

Thanks!

Quote:

Originally Posted by kwmech

Pull the seal out and look at the inner bearing number. Should be 603049 if it is I have one in excellent shape. 100.00 plus the ride

For yalls information; This is against forum rules, OP is a pink non paid subscription member. This thread will quickly be edited or shut down if this persists. It’s ok for OP to ask for vendors or similar who might sell said parts but not ok to turn this into a wtb or for sale thread for your own parts, or for OP to ask to buy members parts. If OP would like to subscribe he/she can gladly post a WTB in parts side of the board.

**kwmech** · 09-09-2021, 12:48 AM

Yeah, I caught that after I had posted....it was a big oooops

mseymour · 09-09-2021, 11:17 AM

OK so please tell me what I did wrong? Asking for help to locate a part? I did not ask for used parts from members, I was hoping someone could point me toward a NAPA link etc.

please let me know so I can correct my mistake?

57taskforce · 09-09-2021, 11:42 AM

Quote:

Originally Posted by mseymour

OK so please tell me what I did wrong? Asking for help to locate a part? I did not ask for used parts from members, I was hoping someone could point me toward a NAPA link etc.

please let me know so I can correct my mistake?

You did nothing wrong, sorry I didn’t communicate that a little better. I was just making sure the rules were made clear and this didn’t turn into a wtb/for sale thread. You are perfectly fine asking for vendors or links, etc. to find parts as a non subscribing member.

Sometimes these threads turn into a slippery slope pretty quickly.

09-08-2021, 04:40 PM	#1
mseymour Registered User Join Date: Dec 2008 Location: Woodlands TX Posts: 23	Dana 44 Hub I need help locating a replacement hub for our 72 K10, old hub has wallered out stud splines and I cant locate a new one online. Id prefer to find one with race pressed in etc. Thanks! Attached Images

09-08-2021, 05:56 PM	#2
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,593	Re: Dana 44 Hub Pull the seal out and look at the inner bearing number. Should be 603049 if it is I have one in excellent shape. 100.00 plus the ride

09-09-2021, 12:07 AM	#3
k29349 Registered User Join Date: Nov 2013 Location: Inman S.C. Posts: 67	Re: Dana 44 Hub ventures_truck_parts. ebay seller

09-09-2021, 12:48 AM	#5
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,593	Re: Dana 44 Hub Yeah, I caught that after I had posted....it was a big oooops

09-09-2021, 11:17 AM	#6
mseymour Registered User Join Date: Dec 2008 Location: Woodlands TX Posts: 23	Re: Dana 44 Hub OK so please tell me what I did wrong? Asking for help to locate a part? I did not ask for used parts from members, I was hoping someone could point me toward a NAPA link etc. please let me know so I can correct my mistake?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.