6l80 to NP205 shifter issues... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ls1nova71 · 11-09-2021, 11:48 AM

Anyone on here put an NP205 transfercase behind a 6l80 with an Advance Adapters kit? It looks like a nice adapter, but there's no where to bolt the shifter to it.... Wondering if someone has come up with a solution before I start fabricating some kind of a mount on my own.

6600DURAMAX · 11-10-2021, 06:04 PM

Not to hyjack the topic but how are you shifting your 6L80E?

My 6L80 has a 208 behind it and I plan on using a shift kit from JB Customs -
jb-customs-fabrication.myshopify.com They do have a NP205 kit for $278

ls1nova71 · 11-12-2021, 11:16 AM

Quote:

Originally Posted by 6600DURAMAX

Not to hyjack the topic but how are you shifting your 6L80E?

My 6L80 has a 208 behind it and I plan on using a shift kit from JB Customs -
jb-customs-fabrication.myshopify.com They do have a NP205 kit for $278

I haven't gotten to the transmission shifter yet, but that looks pretty straight forward other than the long tube header in the way. I'm thinking of just using a Lokar adjustable shift linkage on it.

I have heard about the JB Custom cable shifter, that's what Advance Adapters said to use, but to run the 205 I'm pretty sure you would need the twin stick with 2 shifters and 2 cables, none of which I'm a fan of. Going to try and fab up something I guess since it appears no one has done anything like that yet, so there's no off the shelf answer.

**mongocanfly** · 11-12-2021, 05:41 PM

saw this
most of what i saw was some version of twin sticks, (air ,elec, cable, or levers)

HotRod4me · 01-29-2022, 11:17 PM

I used roughly the same same set up on mine. L96/6L90 with an Advanced Adapter kit. I wanted to keep the stock appearance and not add a twin stick set-up. I had to cut down the 6L90 out put shaft and add a 3/4" spacer to the adapter, so I would have enough splines in the transfer case output shaft. Used 2" flat stock and formed it around the curve of the adapter. Then welded on some sides and a plate to bolt it in 2 places on the transmission tail. Used a couple spacers to get the correct fitting and extended the arm to the transfer case about 1-1/2", so the stock shifter would sit at the correct angle.

ls1nova71 · 01-30-2022, 12:46 PM

Yeah, I ended up doing roughly the same thing. Its not pretty,, but looks like it is going to work out fine.

HotRod4me · 01-30-2022, 09:12 PM

Looks good!!

I was happy with the Advanced Adapter kit, but they sure could do a better job with shift arm mounting options.

I've gotten a lot of tips that have pointed me in the right direction from your previous postings. Keep up the good work.

Thanks

11-09-2021, 11:48 AM	#1
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	6l80 to NP205 shifter issues... Anyone on here put an NP205 transfercase behind a 6l80 with an Advance Adapters kit? It looks like a nice adapter, but there's no where to bolt the shifter to it.... Wondering if someone has come up with a solution before I start fabricating some kind of a mount on my own. Attached Images __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

11-10-2021, 06:04 PM	#2
6600DURAMAX Registered User Join Date: Nov 2000 Location: Wheatfield IN, USA Posts: 1,124	Re: 6l80 to NP205 shifter issues... Not to hyjack the topic but how are you shifting your 6L80E? My 6L80 has a 208 behind it and I plan on using a shift kit from JB Customs - jb-customs-fabrication.myshopify.com They do have a NP205 kit for $278 __________________ 1972 K5 - LS3/408 (595Hp) -6L80e-One Tons with 4.56, 20'' Beadlocks with 37'' rubber, full TMI interior, JL Audio ..... 1971 CREWMAX Build.....at body shop for couple more years

11-12-2021, 05:41 PM	#4
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,670	Re: 6l80 to NP205 shifter issues... saw this most of what i saw was some version of twin sticks, (air ,elec, cable, or levers) Attached Images __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

01-29-2022, 11:17 PM	#5
HotRod4me Registered User Join Date: Feb 2020 Location: Beloit, WI Posts: 36	Re: 6l80 to NP205 shifter issues... I used roughly the same same set up on mine. L96/6L90 with an Advanced Adapter kit. I wanted to keep the stock appearance and not add a twin stick set-up. I had to cut down the 6L90 out put shaft and add a 3/4" spacer to the adapter, so I would have enough splines in the transfer case output shaft. Used 2" flat stock and formed it around the curve of the adapter. Then welded on some sides and a plate to bolt it in 2 places on the transmission tail. Used a couple spacers to get the correct fitting and extended the arm to the transfer case about 1-1/2", so the stock shifter would sit at the correct angle. Attached Images

01-30-2022, 12:46 PM	#6
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: 6l80 to NP205 shifter issues... Yeah, I ended up doing roughly the same thing. Its not pretty,, but looks like it is going to work out fine. Attached Images __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

01-30-2022, 09:12 PM	#7
HotRod4me Registered User Join Date: Feb 2020 Location: Beloit, WI Posts: 36	Re: 6l80 to NP205 shifter issues... Looks good!! I was happy with the Advanced Adapter kit, but they sure could do a better job with shift arm mounting options. I've gotten a lot of tips that have pointed me in the right direction from your previous postings. Keep up the good work. Thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.