rear roll pan pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71chevylongbed · 12-27-2003, 07:50 PM

anyone have pics of a 67-72 longbed with a 2/4 drop and 10 inch wide wheels with a rear roll pan

BowTieMan · 12-27-2003, 08:08 PM

Somebody on here has I think exactly what your looking for. Its a red truck but I dont know his name. Here is the closest picture I have. May help a little.

BowTieMan · 12-27-2003, 08:21 PM

I think this is a little lower then a 2/4 but may help.

**FRENCHBLUE72** · 12-27-2003, 08:26 PM

here's one??

**FRENCHBLUE72** · 12-27-2003, 08:31 PM

yellow one..

71chevylongbed · 12-27-2003, 08:47 PM

thanks those help alot

pissonNOS · 12-28-2003, 10:10 PM

where do you geta roll pan liek that with the lip on the bottom I can only find flush ones in canada?

D-Money · 12-29-2003, 04:26 AM

Heres another pic

Injected68LS1 · 12-29-2003, 05:40 AM

I like this post. I just browse though and I get to see my own truck(the red one). Cool. Thanks D-Money. Now I don't have to post it myself.

REDNEKID · 12-30-2003, 04:51 PM

Wow, someone used a pic of my truck for something. I feel special now. Thanks Brad!!!
Here is a better pic from the back...

12-27-2003, 07:50 PM	#1
71chevylongbed Got Horsepower? Join Date: Sep 2003 Location: IDAHO Posts: 406	rear roll pan pics anyone have pics of a 67-72 longbed with a 2/4 drop and 10 inch wide wheels with a rear roll pan __________________ 2001 Dodge 2500 Cummins, 4 inch lift, 35" Toyo MT's on Ultra wheels, P-Pump Conversion, AFE intake, Fass, 5 inch exhaust, Pyro,Boost,and Fuel pressure guages, and a whole bunch of other stuff "The Money Pit" SOLD-71 Chevy C10 long bed- 2/4 drop-- 350,th400, Edelbrock performer RPM intake,Edelbrock 600 CFM carb,Crower 240 cam,port and polish,Dynomax headers,HEI ignition,dual 2.5 inch exhaust with Flowmaster 50 series mufflers Last edited by 71chevylongbed; 12-27-2003 at 07:56 PM.

12-27-2003, 08:08 PM	#2
BowTieMan Registered User Join Date: Dec 2003 Location: Glendale Arizona Posts: 747	Somebody on here has I think exactly what your looking for. Its a red truck but I dont know his name. Here is the closest picture I have. May help a little. Attached Images __________________ "A true hotrodder wouldn't be content untill he had created a car so violent, so hairy, so totally sick that the very act of dropping the hammer would result in instant death. Anything less results in the need to go faster." - Tony DeFeo

12-27-2003, 08:21 PM	#3
BowTieMan Registered User Join Date: Dec 2003 Location: Glendale Arizona Posts: 747	I think this is a little lower then a 2/4 but may help. Attached Images __________________ "A true hotrodder wouldn't be content untill he had created a car so violent, so hairy, so totally sick that the very act of dropping the hammer would result in instant death. Anything less results in the need to go faster." - Tony DeFeo

12-27-2003, 08:26 PM	#4
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	here's one?? Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-27-2003, 08:31 PM	#5
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	yellow one.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-27-2003, 08:47 PM	#6
71chevylongbed Got Horsepower? Join Date: Sep 2003 Location: IDAHO Posts: 406	thanks those help alot __________________ 2001 Dodge 2500 Cummins, 4 inch lift, 35" Toyo MT's on Ultra wheels, P-Pump Conversion, AFE intake, Fass, 5 inch exhaust, Pyro,Boost,and Fuel pressure guages, and a whole bunch of other stuff "The Money Pit" SOLD-71 Chevy C10 long bed- 2/4 drop-- 350,th400, Edelbrock performer RPM intake,Edelbrock 600 CFM carb,Crower 240 cam,port and polish,Dynomax headers,HEI ignition,dual 2.5 inch exhaust with Flowmaster 50 series mufflers

12-28-2003, 10:10 PM	#7
pissonNOS senior member Join Date: Feb 2003 Location: fort macleod alberta Posts: 2,770	where do you geta roll pan liek that with the lip on the bottom I can only find flush ones in canada? __________________ 69 GMC bagged

12-29-2003, 04:26 AM	#8
D-Money Registered User Join Date: Dec 2003 Location: CA Posts: 315	Heres another pic Attached Images __________________ 1969 Chevy SB Truck under construction hopefully will be done early next year! Will be posting pics soon.

12-29-2003, 05:40 AM	#9
Injected68LS1 Registered User Join Date: Jul 2003 Location: So. Cal. Posts: 389	I like this post. I just browse though and I get to see my own truck(the red one). Cool. Thanks D-Money. Now I don't have to post it myself. __________________ 1968 Chev SWB with 1998 Corvette LS1 305hp and 320 ftlb to the wheels (stock engine!) AEM EMS and wideband O2 sensors Bowtie Overdrive's 700R4, stage 3 Baer 4 wheel discs and 20s http://iciclelanding.com/aperture?album=2049&view=album

12-30-2003, 04:51 PM	#10
REDNEKID Who said that? Join Date: Aug 2003 Location: HOUSTON, TX. Posts: 106	Wow, someone used a pic of my truck for something. I feel special now. Thanks Brad!!! Here is a better pic from the back... Attached Images __________________ Founder 4-Wheel Discs Club!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.