Hello from TX - 1968 C10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

josephuta214 · 02-18-2022, 11:14 PM

Hello Everyone,

Thanks for the add. I've been slowly restoring my fathers truck over the last 2 years. It's a 1968 C10 Custom Long Bed (Short Bed Now). PS, PB, AC.
I really appreciate this community and look forward to sharing the progress. Thanks to everyone who contributes here, it has been super helpful!

Work Done So Far:

Blast and Painted Frame
CPP 3/4 drop kit
Moog Front End
Boyd Tank
Brothers Shortbed Conversion

Currently working on rust repair and LS engine build.
Lots left to be done!

Thanks Again!

**cwcarpenter98** · 02-18-2022, 11:19 PM

Welcome! We like to see pictures of your truck over here, so please throw some up when you get a chance

EDIT: I see now that you've added some pictures. Great work so far! The firewall section doesn't look like a fun piece to fix

franken · 02-19-2022, 02:44 AM

Thanks for the posts and pics. Love `em.
I'd consider a 5 lug conversion since you can move to disks in the front from many later years and even the rears land in the local picnpull fairly often. There are 3-4 picnpulls in DFW and lots of other similar outfits. Picnpulls just allow you to search inventory.
5-lug all around gives some wheel choices and disk brakes in the front is a good thing.

**The Rocknrod** · 02-19-2022, 09:05 AM

Wow nice truck. Welcome to the forum.

josephuta214 · 02-19-2022, 10:14 PM

Quote:

Originally Posted by cwcarpenter98

Welcome! We like to see pictures of your truck over here, so please throw some up when you get a chance

EDIT: I see now that you've added some pictures. Great work so far! The firewall section doesn't look like a fun piece to fix

Thanks! Yes the firewall/cowl area has been a challenge. I'm handing the rust repair/welding work over to my uncle whose a master welder. While I focus on the engine build.

josephuta214 · 02-19-2022, 10:15 PM

Quote:

Originally Posted by The Rocknrod

Wow nice truck. Welcome to the forum.

Thanks!

josephuta214 · 02-19-2022, 10:17 PM

Quote:

Originally Posted by franken

Thanks for the posts and pics. Love `em.
I'd consider a 5 lug conversion since you can move to disks in the front from many later years and even the rears land in the local picnpull fairly often. There are 3-4 picnpulls in DFW and lots of other similar outfits. Picnpulls just allow you to search inventory.
5-lug all around gives some wheel choices and disk brakes in the front is a good thing.

Thanks! Yes I do have front disc brakes planned. I'm hoping I can keep the 6 lug rallys but I may need to get some 15x8 rallys from a newer model C10 I imagine.

**The Rocknrod** · 02-20-2022, 06:45 AM

Quote:

Originally Posted by josephuta214

Thanks! Yes I do have front disc brakes planned. I'm hoping I can keep the 6 lug rallys but I may need to get some 15x8 rallys from a newer model C10 I imagine.

https://www.ebay.com/sch/i.html?_nkw...kcid=1&_sop=12

josephuta214 · 02-22-2022, 01:26 AM

Quote:

Originally Posted by The Rocknrod

https://www.ebay.com/sch/i.html?_nkw...kcid=1&_sop=12

Thanks!

SCOTI · 02-28-2022, 05:08 PM

Welcome to the site from your neighbor over in Dallas.

They make 6-lug disc brake conversion rotors that are available through the aftermarket if you want to utilize the current wheels front & rear for now. As far as I know they use the same spindle bearing set-up as the HD 5-lug rotors so it's just a different 6-lug rotor.

Worth looking into.

josephuta214 · 03-02-2022, 03:11 AM

Quote:

Originally Posted by SCOTI

Welcome to the site from your neighbor over in Dallas.

They make 6-lug disc brake conversion rotors that are available through the aftermarket if you want to utilize the current wheels front & rear for now. As far as I know they use the same spindle bearing set-up as the HD 5-lug rotors so it's just a different 6-lug rotor.

Worth looking into.

Thanks! Will definitely look into those.

CC69Rat · 03-06-2022, 10:26 AM

Nice truck man. Great job on the frame cut down. Welcome to the board.

LT7A · 03-07-2022, 12:40 AM

Welcome! You've already made a lot of good progress and glad you could join up here. Thanks for all the pictures.

02-18-2022, 11:14 PM	#1
josephuta214 Registered User Join Date: Feb 2022 Location: ARLINGTON Posts: 5	Hello from TX - 1968 C10 Hello Everyone, Thanks for the add. I've been slowly restoring my fathers truck over the last 2 years. It's a 1968 C10 Custom Long Bed (Short Bed Now). PS, PB, AC. I really appreciate this community and look forward to sharing the progress. Thanks to everyone who contributes here, it has been super helpful! Work Done So Far: Blast and Painted Frame CPP 3/4 drop kit Moog Front End Boyd Tank Brothers Shortbed Conversion Currently working on rust repair and LS engine build. Lots left to be done! Thanks Again! Last edited by josephuta214; 02-19-2022 at 12:34 AM.

02-18-2022, 11:19 PM	#2
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,488	Re: Hello from TX - 1968 C10 Welcome! We like to see pictures of your truck over here, so please throw some up when you get a chance EDIT: I see now that you've added some pictures. Great work so far! The firewall section doesn't look like a fun piece to fix __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson Last edited by cwcarpenter98; 02-19-2022 at 01:39 AM.

02-19-2022, 02:44 AM	#3
franken Registered User Join Date: Jun 2013 Location: Somewhere Posts: 3,122	Re: Hello from TX - 1968 C10 Thanks for the posts and pics. Love `em. I'd consider a 5 lug conversion since you can move to disks in the front from many later years and even the rears land in the local picnpull fairly often. There are 3-4 picnpulls in DFW and lots of other similar outfits. Picnpulls just allow you to search inventory. 5-lug all around gives some wheel choices and disk brakes in the front is a good thing.

02-19-2022, 09:05 AM	#4
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Hello from TX - 1968 C10 Wow nice truck. Welcome to the forum. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

02-28-2022, 05:08 PM	#10
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	Re: Hello from TX - 1968 C10 Welcome to the site from your neighbor over in Dallas. They make 6-lug disc brake conversion rotors that are available through the aftermarket if you want to utilize the current wheels front & rear for now. As far as I know they use the same spindle bearing set-up as the HD 5-lug rotors so it's just a different 6-lug rotor. Worth looking into. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

03-06-2022, 10:26 AM	#12
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,212	Re: Hello from TX - 1968 C10 Nice truck man. Great job on the frame cut down. Welcome to the board. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

03-07-2022, 12:40 AM	#13
LT7A Registered User Join Date: Oct 2015 Location: PNW Posts: 3,619	Re: Hello from TX - 1968 C10 Welcome! You've already made a lot of good progress and glad you could join up here. Thanks for all the pictures.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.