Door Hinges... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

allthrtl · 12-30-2003, 06:23 AM

Pin and bushing kit or complete hinges??? How well does the bushing kit work?? I would rather spend the money and do it right, but if the hinge kit works GOOD, then I'm all for saving a buck...

Jonboy · 12-30-2003, 10:18 AM

The hinge kit works fine. I would suggest taking the hinges off of the truck, and doing them in a vise. That being said, I would also do one at a time.

Mike76251 · 12-31-2003, 03:19 AM

The hard part is re-staking the pins in.
I had to put a small weld bead on mine to hold them in.

**old Rusty C10** · 12-31-2003, 01:20 PM

everyone i have met on here has repaired their hinges, me ive always went out and replaced em

allthrtl · 12-31-2003, 01:34 PM

Yeah, it looked like getting the pins out was going to be a PIA, I
guess nothing a die grinder can't handle. Then I figured I'd drill a hole near the bottom of the hinge pin then put a cotter pin in, or a long roll pin.....OR.....LMC has new hinges for $24.95 ea......

PHOENIX · 12-31-2003, 02:09 PM

Anyone have GM price or part numbers on repair kit and all new hinge?

12-30-2003, 06:23 AM	#1
allthrtl Available for Adoption Join Date: May 2003 Location: Lubbock Tx Posts: 177	Door Hinges... Pin and bushing kit or complete hinges??? How well does the bushing kit work?? I would rather spend the money and do it right, but if the hinge kit works GOOD, then I'm all for saving a buck... __________________ 1983 C10 SWB 2001 Silverado SWB 1995 Corvette

12-30-2003, 10:18 AM	#2
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	The hinge kit works fine. I would suggest taking the hinges off of the truck, and doing them in a vise. That being said, I would also do one at a time. __________________ 1974 Jimmy- 5.3/4L80e/NP241

12-31-2003, 01:20 PM	#4
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,313	everyone i have met on here has repaired their hinges, me ive always went out and replaced em __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

12-31-2003, 01:34 PM	#5
allthrtl Available for Adoption Join Date: May 2003 Location: Lubbock Tx Posts: 177	Yeah, it looked like getting the pins out was going to be a PIA, I guess nothing a die grinder can't handle. Then I figured I'd drill a hole near the bottom of the hinge pin then put a cotter pin in, or a long roll pin.....OR.....LMC has new hinges for $24.95 ea...... __________________ 1983 C10 SWB 2001 Silverado SWB 1995 Corvette

12-31-2003, 02:09 PM	#6
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	Anyone have GM price or part numbers on repair kit and all new hinge? __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

12-31-2003, 03:19 AM	#3
Mike76251 Senior Member Join Date: Mar 2003 Posts: 2,499	The hard part is re-staking the pins in. I had to put a small weld bead on mine to hold them in.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.