TX WTB - Round dipstick for 216/235/261 engine - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**TX3100Guy** · 04-28-2022, 06:20 PM

Seems that my jigsaw puzzle of a truck has a non-standard dipstick that needs to be replaced. Does anyone have the standard Chevy dipstick for this era of engine? Send me a PM with your thoughts on price.

Many thanks,

Bob

Bimus · 04-29-2022, 11:00 AM

Is this what you need .

**TX3100Guy** · 04-29-2022, 04:31 PM

Quote:

Originally Posted by Bimus

Is this what you need .

Since I've not actually seen the appropriate dip stick for the truck I can only go by what I've read or been told. I can't tell from the picture, but I've been told that the dipstick portion is a round non-flexible rod. If that fits the bill, then the next question is how much do you want for it. You can PM me and we can share details.

Thank you.

Bob

Bimus · 04-29-2022, 05:44 PM

Looking some more I found a 216 out of a 52 pickup that had a short dip stick no tube out of the block and the one pictured had a tube sticking out of the block so it takes the long dip stick . what engine do you have and dose the dip stick slide in to a tube or right in to the block ?

**TX3100Guy** · 04-29-2022, 06:53 PM

I have a 1959 261 cu/in Chevy engine. There is a tube inserted in the block for the dipstick. I’m told that the 216, 235, and 261 shared the same dipstick design.
Posted via Mobile Device

Bimus · 04-29-2022, 07:45 PM

Maybe some one with a 261 can post a picture showing the length .

**TX3100Guy** · 04-29-2022, 08:21 PM

Quote:

Originally Posted by Bimus

Maybe some one with a 261 can post a picture showing the length .

I’ve measured using another dip stick. From the top of the block to the bottom of the oil sump is 10 inches. From the top of the block to the top of the dipstick tube is 7 1/8 inches.
Posted via Mobile Device

Bimus · 04-29-2022, 10:04 PM

The long dip stick I have is 17 1/4 from the bottom to the stop I think that is to long

**TX3100Guy** · 04-29-2022, 10:08 PM

Quote:

Originally Posted by Bimus

The long dip stick I have is 17 1/4 from the bottom to the stop I think that is to long

That actually sounds perfect since I would need a total length of 17 1/8 inches give or take a fraction. (ten inches from the block opening to the bottom of the oil sump plus a dipstick tube that is about 7 1/8 inches for a total of 17 1/8.

Are you interesting in selling it?

04-28-2022, 06:20 PM	#1
TX3100Guy Senior Member Join Date: Mar 2022 Location: Lucas, TX Posts: 610	WTB - Round dipstick for 216/235/261 engine Seems that my jigsaw puzzle of a truck has a non-standard dipstick that needs to be replaced. Does anyone have the standard Chevy dipstick for this era of engine? Send me a PM with your thoughts on price. Many thanks, Bob __________________ 1953 Chevy 3100 - 5 window 1/2 ton pickup My 1953 Chevy Work-In-Process Photo Gallery "I don't have a carbon footprint, I drive everywhere." Last edited by TX3100Guy; 04-28-2022 at 10:20 PM.

04-29-2022, 11:00 AM	#2
Bimus Registered User Join Date: Dec 2018 Location: Farmington NM Posts: 112	Re: WTB - Round dipstick for 216/235/261 engine Is this what you need . Attached Images

04-29-2022, 05:44 PM	#4
Bimus Registered User Join Date: Dec 2018 Location: Farmington NM Posts: 112	Re: WTB - Round dipstick for 216/235/261 engine Looking some more I found a 216 out of a 52 pickup that had a short dip stick no tube out of the block and the one pictured had a tube sticking out of the block so it takes the long dip stick . what engine do you have and dose the dip stick slide in to a tube or right in to the block ?

04-29-2022, 07:45 PM	#6
Bimus Registered User Join Date: Dec 2018 Location: Farmington NM Posts: 112	Re: WTB - Round dipstick for 216/235/261 engine Maybe some one with a 261 can post a picture showing the length .

04-29-2022, 10:04 PM	#8
Bimus Registered User Join Date: Dec 2018 Location: Farmington NM Posts: 112	Re: WTB - Round dipstick for 216/235/261 engine The long dip stick I have is 17 1/4 from the bottom to the stop I think that is to long

04-29-2022, 06:53 PM	#5
TX3100Guy Senior Member Join Date: Mar 2022 Location: Lucas, TX Posts: 610	I have a 1959 261 cu/in Chevy engine. There is a tube inserted in the block for the dipstick. I’m told that the 216, 235, and 261 shared the same dipstick design. Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.