Good lower Rht front fender patch! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Sloan66 · 06-08-2022, 01:39 PM

Read several post about having to modify the rht front fender patch. I picked one up from AMD and it was very close fit! I drilled out the spot weld on the very front portion and just had to move it slightly to line up.

tommy3horse · 06-08-2022, 03:41 PM

Nice work there!

Roostre · 06-09-2022, 09:40 PM

Looks good! And very similar to mine, except I had to cut mine apart even more than just the spot welds to get it to fit!

SCOTI · 06-10-2022, 09:32 AM

Quote:

Originally Posted by Roostre

Looks good! And very similar to mine, except I had to cut mine apart even more than just the spot welds to get it to fit!

I had to do the same as what appears in your image. Cut it down the middle. Fit the rear section up so the body line & wheel open features align. Fit the front section up so it fits best. The make a filler piece for the gap between the F & R sections.

Peanut74 · 06-11-2022, 06:02 PM

Glad you got a good patch panel. Mine was a challenge to get it to fit right. Had to cut it both vertically and horizontally to make it fit right.
Nice job and looks good.

06-08-2022, 01:39 PM	#1
Sloan66 Registered User Join Date: Jan 2013 Location: Jackson, TN Posts: 215	Good lower Rht front fender patch! Read several post about having to modify the rht front fender patch. I picked one up from AMD and it was very close fit! I drilled out the spot weld on the very front portion and just had to move it slightly to line up. Attached Images

06-08-2022, 03:41 PM	#2
tommy3horse Registered User Join Date: Feb 2015 Location: St. Clair, Missouri Posts: 124	Re: Good lower Rht front fender patch! Nice work there! __________________ 1972 GMC C1500 350/350 1965 Mustang 2+2 289 4spd, show-car 1965 Mustang Coupe 289 4spd, stoplight racer 1/2 dozen Wheelhorse Tractors

06-09-2022, 09:40 PM	#3
Roostre Registered User Join Date: Dec 2018 Location: St. James, MN Posts: 172	Re: Good lower Rht front fender patch! Looks good! And very similar to mine, except I had to cut mine apart even more than just the spot welds to get it to fit! Attached Images __________________ My 67: http://67-72chevytrucks.com/vboard/s...d.php?t=784468

06-11-2022, 06:02 PM	#5
Peanut74 Registered User Join Date: May 2018 Location: Prattville, AL Posts: 611	Re: Good lower Rht front fender patch! Glad you got a good patch panel. Mine was a challenge to get it to fit right. Had to cut it both vertically and horizontally to make it fit right. Nice job and looks good. __________________ -------------------------------------------------------- 1967 C10 "Snowball" (Currently in a thousand pieces down from a bazillion) 1989 Toyota DLX pickup "The Hulk"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.