08-20-2022, 11:05 AM | #1 |
Active Member
Join Date: Nov 2019
Location: SE WI
Posts: 125
|
Wheel ID
I finally located a matching wheel for my '64 and replaced this oddball that was on the truck when I bought it. Curious of the year and model??
|
08-20-2022, 12:17 PM | #2 |
Registered User
Join Date: Aug 2010
Location: Burbank CA
Posts: 3,055
|
Re: Wheel ID
I could be wrong, but if that wheel is 17.5" its is very hard to find. The eight lug version of that wheel was standard equip for C20's in the 60's and used to be fairly common. That is not at all the case with the half ton version, hence they are highly sought after especially amongst the 4WD crowd.
|
08-20-2022, 01:20 PM | #3 |
Senior Member
Join Date: Sep 2007
Location: Albuquerque NM
Posts: 7,862
|
Re: Wheel ID
with is the tire size and the width?
15 or 16 inch? and bead to bead is it 5"?
__________________
1967custom |
08-20-2022, 02:49 PM | #4 |
Registered User
Join Date: Oct 2014
Location: somewhere . . .
Posts: 972
|
Re: Wheel ID
Is there any stampings on it like around the valve stem ?
__________________
dont want to hear excuses, i want to hear solution(s) |
08-20-2022, 08:37 PM | #5 |
Active Member
Join Date: Nov 2019
Location: SE WI
Posts: 125
|
Re: Wheel ID
It is 15x5.5 and not finding any stampings aside from the inner rim with “made in the USA 15 x 5 1/2 K NT 1 6”
|
08-21-2022, 12:21 PM | #6 |
Registered User
Join Date: Apr 2012
Location: Wisconsin
Posts: 3,329
|
Re: Wheel ID
Its a 1960 rim if it has the bumps on the outer edge of rim , or a 1961 possibly if no bumps .
__________________
IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK |
08-21-2022, 10:55 PM | #7 |
Senior Member
Join Date: Sep 2011
Location: Seward Nebraska
Posts: 1,596
|
Re: Wheel ID
Also used on GMC of the same era including 59
|
Bookmarks |
|
|