NP205 Rear Yoke

[truckster]

I replaced the rear transfer case yoke seal in my Blazer, but when I had it out I noticed that the yoke had a groove and it didn't seal properly. I've ordered a sleeve kit twice and it hasn't been delivered yet, so I think I'll just replace the yoke. My problem is that I see several options listed, and I don't know what the stock one would be for a 72 K/5 Blazer. Any help would be appreciated.

[kwmech]

I'd give Six states a call to set you up
(801) 224-1155

[truckster]

Originally Posted by kwmech

I'd give Six states a call to set you up
(801) 224-1155

That's a good idea. They're actually just down the road from me.

Thanks.

[kwmech]

I haven't dealt with them in years, but they used to have a huge inventory at their Boise store. I used to get a ton of spicer stuff from them and custom built PTOs

[truckster]

I'll try calling them tomorrow.

[truckster]

The sleeve arrived today, so I'll install it tomorrow and see how it works.

I was surprised, though, to see something unusual on the box - Made in USA.

[kwmech]

Maybe it was the box that was made in the USA

[truckster]

I installed it today. I used Permatex sleeve retainer and the sleeve went right on with a deadblow hammer and the installation tool that was included with the sleeve. I also replaced the seal, just in case the worn yoke had damaged it. We'll see if it works, but I can't see any reason it wouldn't.