6 cylinder engine stands - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Lost in the 60's** · 09-20-2022, 01:30 PM

My new roller was sans the engine, but I, also, discovered they removed the frame stands. Are they the same as a V8 ?
I will also need the small brackets that mount to the engine. I have a built 292 to install, but of course, it has none of the parts beyond the block.
Thanks

**Grumpy old man** · 09-20-2022, 03:01 PM

Quote:

Originally Posted by Lost in the 60's

My new roller was sans the engine, but I, also, discovered they removed the frame stands. Are they the same as a V8 ?
I will also need the small brackets that mount to the engine. I have a built 292 to install, but of course, it has none of the parts beyond the block.
Thanks

I recently sold all my 292 extra parts to CarolinaHD contact him about what you need . The 292 engine and mounts are their own special animal you need 292 specific mounts , the V8 and 250 6 engine mounts won't work to install a 292 in your truck , Good luck finding the 292 mounts they are hard to find and usually a bit more expensive to buy .

**Lost in the 60's** · 09-20-2022, 03:29 PM

Well dang, guess I had to go and make my own life more difficult...

I seem to recall something about that now. It's been 7-8 years since I had this 292 built for a different vehicle.
Thanks, I'll see about contacting him.

cheyenne shortstep · 10-22-2022, 03:21 PM

Only the passenger side engine stand is 292 specific. Drivers side is the same as 250

**mr48chev** · 10-23-2022, 01:48 AM

OOPS it is the right side mount that bolts to the frame that is different and not the one that bolts to the engine, it is just a few inches ahead of the drivers side mount on the block.

The greasy orange one being my 292 and the blue one being someone else's 250.

**Lost in the 60's** · 10-24-2022, 08:16 AM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

**Grumpy old man** · 10-24-2022, 08:40 AM

....

swb4me · 10-24-2022, 02:55 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

**Boog** · 10-24-2022, 03:39 PM

These pics were posted by one or more members of the various stands to help in determining the differences between each and their proper location on the frame.

**Boog** · 10-24-2022, 03:42 PM

One more.

**Lost in the 60's** · 10-24-2022, 05:05 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

09-20-2022, 01:30 PM	#1
Lost in the 60's Active Member Join Date: Mar 2022 Location: Twin Cites, MN Posts: 189	6 cylinder engine stands My new roller was sans the engine, but I, also, discovered they removed the frame stands. Are they the same as a V8 ? I will also need the small brackets that mount to the engine. I have a built 292 to install, but of course, it has none of the parts beyond the block. Thanks

09-20-2022, 03:29 PM	#3
Lost in the 60's Active Member Join Date: Mar 2022 Location: Twin Cites, MN Posts: 189	Re: 6 cylinder engine stands Well dang, guess I had to go and make my own life more difficult... I seem to recall something about that now. It's been 7-8 years since I had this 292 built for a different vehicle. Thanks, I'll see about contacting him.

10-22-2022, 03:21 PM	#4
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: 6 cylinder engine stands Only the passenger side engine stand is 292 specific. Drivers side is the same as 250

10-23-2022, 01:48 AM	#5
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,561	Re: 6 cylinder engine stands OOPS it is the right side mount that bolts to the frame that is different and not the one that bolts to the engine, it is just a few inches ahead of the drivers side mount on the block. The greasy orange one being my 292 and the blue one being someone else's 250. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

10-24-2022, 08:16 AM	#6
Lost in the 60's Active Member Join Date: Mar 2022 Location: Twin Cites, MN Posts: 189	Re: 6 cylinder engine stands Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. Last edited by cwcarpenter98; 10-24-2022 at 10:44 PM.

10-24-2022, 08:40 AM	#7
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: 6 cylinder engine stands .... __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop Last edited by cwcarpenter98; 10-24-2022 at 10:45 PM. Reason: Assisting with WTB

10-24-2022, 02:55 PM	#8
swb4me Registered User Join Date: Sep 2015 Location: SE Idaho Posts: 147	Re: 6 cylinder engine stands Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. Last edited by cwcarpenter98; 10-24-2022 at 10:46 PM. Reason: Assisting with WTB

10-24-2022, 03:39 PM	#9
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,356	Re: 6 cylinder engine stands These pics were posted by one or more members of the various stands to help in determining the differences between each and their proper location on the frame. Attached Images __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

10-24-2022, 03:42 PM	#10
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,356	Re: 6 cylinder engine stands One more. Attached Images __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

10-24-2022, 05:05 PM	#11
Lost in the 60's Active Member Join Date: Mar 2022 Location: Twin Cites, MN Posts: 189	Re: 6 cylinder engine stands Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. Last edited by cwcarpenter98; 10-24-2022 at 10:46 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.