|
10-08-2022, 01:44 PM
|
#1 |
|
Registered User
Join Date: Dec 2007
Location: Middleburg, North Carolina
Posts: 480
|
5.3L connecting rod
My first LS teardown. I have never seen a rod that was not flat at the mating surfaces. I went to the machine shop and saw several that were the same as mine, but mine being a little more pronounced. Is this a normal looking rod end mating surface?
1st time down this path and I even flipped a bit when the #5 main cap is on backwards by looking at the dimple castings. I had to check that too. Tahoe had a lot of miles. The rod bearings are GM STD and the mains are .010 GM. The Tahoe was running when it hit the tree. The rods were working but the mating surfaces looked a bit off. Scott |
|
|
|
10-08-2022, 02:43 PM
|
#2 |
|
Registered User
Join Date: Nov 2013
Location: Antioch, Ca.
Posts: 457
|
Re: 5.3L connecting rod
I think I've heard that they have a complete rod then they snap off the bottom so that they will only fit perfect with the correct rod.
__________________
Take Care Troy |
|
|
|
10-08-2022, 04:14 PM
|
#3 |
|
Post Whore
  
Join Date: May 2015
Location: Alabama
Posts: 14,673
|
Re: 5.3L connecting rod
Correct ,,,they are fracture split rods
https://m.youtube.com/watch?v=CQ427dNtGW4
__________________
Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver |
|
|
|
|
10-08-2022, 04:29 PM
|
#4 |
|
Registered User
Join Date: Dec 2007
Location: Middleburg, North Carolina
Posts: 480
|
Re: 5.3L connecting rod
Thanks for the re-assurance.
Scott |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
