55.2-59 deluxe heater controls - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**popeyestruck** · 10-30-2022, 04:38 PM

Trying to get everything out of the cab for paint . Whats the trick to get the controls out of the dash?

**popeyestruck** · 10-31-2022, 11:34 AM

Got it out

**mr48chev** · 10-31-2022, 02:07 PM

What's the trick, inquiring minds want to know.

Outside of having a skinny kid get up under the dash that is.

**popeyestruck** · 10-31-2022, 02:23 PM

Removed the side screws then just kept wiggling it until it was just hanging on by about 1/16 inch on top then pried it out with a thin screwdriver. I'm sure thats not the way it was intended but it worked with no damage. After getting it out heres how you do it . 1 remover side screws (4) to losen faceplate. 2 the control knobs are held in by set screws. Remove them 3 remove faceplate and the take the controls out the back. Forgot to add theres 2 screws on top holding the faceplate snug to the dash. Back them off. They are about 1/2 inch above the off - fan- hi control

10-30-2022, 04:38 PM	#1
popeyestruck Senior Member Join Date: May 2022 Location: Longwood 59 chevy Posts: 313	deluxe heater controls Trying to get everything out of the cab for paint . Whats the trick to get the controls out of the dash?

10-31-2022, 11:34 AM	#2
popeyestruck Senior Member Join Date: May 2022 Location: Longwood 59 chevy Posts: 313	Re: deluxe heater controls Got it out

10-31-2022, 02:07 PM	#3
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,705	Re: deluxe heater controls What's the trick, inquiring minds want to know. Outside of having a skinny kid get up under the dash that is. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

10-31-2022, 02:23 PM	#4
popeyestruck Senior Member Join Date: May 2022 Location: Longwood 59 chevy Posts: 313	Re: deluxe heater controls Removed the side screws then just kept wiggling it until it was just hanging on by about 1/16 inch on top then pried it out with a thin screwdriver. I'm sure thats not the way it was intended but it worked with no damage. After getting it out heres how you do it . 1 remover side screws (4) to losen faceplate. 2 the control knobs are held in by set screws. Remove them 3 remove faceplate and the take the controls out the back. Forgot to add theres 2 screws on top holding the faceplate snug to the dash. Back them off. They are about 1/2 inch above the off - fan- hi control Last edited by popeyestruck; 10-31-2022 at 02:31 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.