OR 1964 305E V6 engine - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**caseyjones** · 12-09-2022, 05:48 PM

I’m swapping to a small block and that means I have a surplus 305E V6. The engine runs well, does not appear to burn oil, doesn’t make any bad noises, etc. I’ve set it up with a Holley carb and a new fuel pump. New plugs and wires. Flywheel resurfaced. Comes complete with bellhousing, clutch, alternator and bracket, engine mounts…basically all the specific GMC parts. Looking for $250 o.b.o. Engine is still in the truck, planning to pull it out around the start of the new year. Located in Portland, OR.

**caseyjones** · 04-06-2023, 03:53 PM

Any takers for $0 without the carb and adapter? I’m going to start dismantling the motor to haul it off for scrap soon.

duallyjams · 04-06-2023, 05:54 PM

Have you tried posting on
https://6066gmcclub.com/forumdisplay.php?f=4

I would have jumped on it except same old story, I'm on the opposite coast ( shipping )

**caseyjones** · 04-06-2023, 06:30 PM

Quote:

Originally Posted by duallyjams

Have you tried posting on
https://6066gmcclub.com/forumdisplay.php?f=4

I would have jumped on it except same old story, I'm on the opposite coast ( shipping )

I would except I don’t want to pay for a membership to give away an engine

duallyjams · 04-07-2023, 01:16 PM

I posted a link in the general discussion on the 60-66 site.

12-09-2022, 05:48 PM	#1
caseyjones Senior Member Join Date: Nov 2013 Location: Portland, OR Posts: 555	1964 305E V6 engine I’m swapping to a small block and that means I have a surplus 305E V6. The engine runs well, does not appear to burn oil, doesn’t make any bad noises, etc. I’ve set it up with a Holley carb and a new fuel pump. New plugs and wires. Flywheel resurfaced. Comes complete with bellhousing, clutch, alternator and bracket, engine mounts…basically all the specific GMC parts. Looking for $250 o.b.o. Engine is still in the truck, planning to pull it out around the start of the new year. Located in Portland, OR. __________________ 1955 Long Distance Build 1964 GMC Palomino Tan Survivor 1964 C10 Survivor - Sold Last edited by caseyjones; 12-09-2022 at 06:02 PM.

04-06-2023, 03:53 PM	#2
caseyjones Senior Member Join Date: Nov 2013 Location: Portland, OR Posts: 555	Re: 1964 305E V6 engine Any takers for $0 without the carb and adapter? I’m going to start dismantling the motor to haul it off for scrap soon. __________________ 1955 Long Distance Build 1964 GMC Palomino Tan Survivor 1964 C10 Survivor - Sold

04-06-2023, 05:54 PM	#3
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 1964 305E V6 engine Have you tried posting on https://6066gmcclub.com/forumdisplay.php?f=4 I would have jumped on it except same old story, I'm on the opposite coast ( shipping ) __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

04-07-2023, 01:16 PM	#5
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 1964 305E V6 engine I posted a link in the general discussion on the 60-66 site. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.