Need a certain type of intake - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**BIG ORANGE** · 01-06-2004, 12:20 AM

This is a 4 barrel intake that came off a 84 to 86 Chevy Van with a 350 engine only and the last 3 digits in the casting # is 055 also on the right rear corner theres a symbol like a arrow with one point missing! Does anyone know where a intake like this is? The runners of the intake are 10 thousandth bigger then a regular car intake! I REALLY NEED ONE OF THESE!!!!!!!!!!!!!!!!!!

*1972C10* · 01-06-2004, 12:40 AM

I may have one Seems i got an intake that came off of a van engine last three digits 055 Ill check into it and see.

Perchjerker · 01-06-2004, 12:49 AM

1972C10 you got some Shiznet! Where are all your parts from?

fast71 · 01-06-2004, 12:50 AM

14057055 I have one donnie

*1972C10* · 01-06-2004, 01:00 AM

Man your talkin to the biggest packrat Youd be busy for hours lookin at all my crap Turns out i dont have an intake like you want ive got a ton o 076s 050 053 but no 055 Im the worlds worst about getting blown up motors and takin them apart and hoarding the parts because I know one day i can use them lol

The intake that came off that van had the heat stove choke so i guess it was a late 70s

**BIG ORANGE** · 01-06-2004, 01:18 AM

Hey I'm needing some X rods out of a 305 also.lol
Anyone got them????????

Perchjerker · 01-06-2004, 01:25 AM

Hey packrat, got any stock valve covers for a 1971 307 CID???

*1972C10* · 01-06-2004, 02:06 AM

Ive got Some "O" Rods same differnce as X they have had the beams polished to relive the chance of stress crackin they will need to be resized they have minor rust from sitting.
Ive got some covers but not really any off of a 71 307 all the ones i have have the wire tabs except for one pair that i removed them i think i have pics listed in the 73-87 parts board under various parts.

PT'S 70 CST · 01-06-2004, 02:28 AM

PEACHJERKER I HAVE A SET OF STOCK COVERS OFF OF A 70 307 THAT CAME OUT OF MY 70 NOVA. I WILL TRY TO ROUND THEM UP, IF I AM NOT WRONG I THINK I BEAD BLASTED THEM AND RESTORED THEM TO THE CORRECT CHEVY ORANGE COLOR (PLASTICOAT PAINT)

*Randy70C-10* · 01-06-2004, 10:53 AM

1972C10- Watcha doing with that Chinese rifle?

**BIG ORANGE** · 01-06-2004, 06:42 PM

ANYBODY ELSE GOT A 055 INTAKE????????????

fast71 · 01-06-2004, 07:58 PM

I found this on classicars auto racing rules
M. Any standard production GM small block Chevy intake for cars and trucks allowed. Commonly used casting numbers are 14057055, 14014432 and 10185063. They can be of 2 or 4-barrel design and cast iron or aluminum. They all have to be of the late model emissions type with EGR valve mount on the intake. It can be plugged off and not functional. No porting or polishing allowed. Any carburetor spacer or adapter and thickness allowed.

*1972C10* · 01-06-2004, 09:11 PM

Quote:

Originally posted by Randy70C-10
1972C10- Watcha doing with that Chinese rifle?

Ohh just admiring it

**JDL** · 01-06-2004, 09:25 PM

I know I have the rods and I might have an intake

**BIG ORANGE** · 01-06-2004, 10:41 PM

JDL send me some pics of the rods where there marked X and the intake at the back of it also 055!
www.drsnipes@comporium.net
thanks

robby · 01-07-2004, 12:41 AM

Is that an SKS with the magazine conversion?

**BIG ORANGE** · 01-07-2004, 07:01 PM

STILL LOOKIN 4 A INTAKE AND SOME XRODS!!!!!!!!!!
HHHHHHEEEELLLLLPPPPPPP!!!!!!!!!!!!!!!!!!!!

*Pardue'sCustoms* · 01-08-2004, 02:31 AM

i got a 307 ill look and see for you i got a factory alummanium intake

cableguy0 · 01-08-2004, 03:23 PM

i have a factory aluminum 053 intake if im not mistaken it came off of a vette its got the spreadbore pattern on it

**BIG ORANGE** · 01-09-2004, 12:12 AM

OK guys yall doing good I think I got 1 intake and aset of X rods but I still NEED a intake with the last 3 digits 055 in the casting #s.It come off a 84 to 86 Van with a 350!And it has to be a cast intake!

NEEDaCELICA · 01-09-2004, 03:53 PM

ive got an offenhauser high rise intake manifold for a 350 for sale, i dont know how big the ports are but im pretty sure there bigger then any stock ones

*Randy70C-10* · 01-09-2004, 05:01 PM

I have a 053 factory aluminum intake also. Any takers?

Quote:

Originally posted by robby
Is that an SKS with the magazine conversion?

Yep

*1972C10* · 01-10-2004, 09:10 PM

Quote:

Originally posted by robby
Is that an SKS with the magazine conversion?

I dont know if you would call it a magazine conversion

Step one remove trigger assembly Step two take out box magazine step three reinstall trigger assembly step four put in detach mag simple as that.

I would like to get the kit to make it take Ak mags Since they are dirt cheap Anyone know where a person can obtain those little strips ?

*1972C10* · 01-10-2004, 09:32 PM

i got an 055 intake today let me know if you still need it.

**BIG ORANGE** · 01-10-2004, 11:36 PM

1972 c10 you got a PM!

01-06-2004, 12:20 AM	#1
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,767	Need a certain type of intake This is a 4 barrel intake that came off a 84 to 86 Chevy Van with a 350 engine only and the last 3 digits in the casting # is 055 also on the right rear corner theres a symbol like a arrow with one point missing! Does anyone know where a intake like this is? The runners of the intake are 10 thousandth bigger then a regular car intake! I REALLY NEED ONE OF THESE!!!!!!!!!!!!!!!!!! __________________ Things happen for a reason! Last edited by BIG ORANGE; 01-06-2004 at 01:03 AM.

01-06-2004, 12:49 AM	#3
Perchjerker Beer Power!!!!!!!!!! Join Date: Nov 2003 Location: Nacogdoches, TX Posts: 280	1972C10 you got some Shiznet! Where are all your parts from? __________________ Rather be fishin'

01-06-2004, 12:50 AM	#4
fast71 Drive it like U stole it Join Date: Mar 2000 Location: tunnel hill ,GA /Chatt,TN Posts: 956	14057055 I have one donnie __________________ 71 custom 10 swb 72 nova ss 72 nova custom 87 s10 96 burb 94 camry 53 5 window 3100

01-06-2004, 01:00 AM	#5
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	Man your talkin to the biggest packrat Youd be busy for hours lookin at all my crap Turns out i dont have an intake like you want ive got a ton o 076s 050 053 but no 055 Im the worlds worst about getting blown up motors and takin them apart and hoarding the parts because I know one day i can use them lol The intake that came off that van had the heat stove choke so i guess it was a late 70s Last edited by 1972C10; 01-06-2004 at 01:03 AM.

01-06-2004, 01:18 AM	#6
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,767	Hey I'm needing some X rods out of a 305 also.lol Anyone got them???????? __________________ Things happen for a reason!

01-06-2004, 12:40 AM	#2
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	I may have one Seems i got an intake that came off of a van engine last three digits 055 Ill check into it and see.

01-06-2004, 01:25 AM	#7
Perchjerker Beer Power!!!!!!!!!! Join Date: Nov 2003 Location: Nacogdoches, TX Posts: 280	Hey packrat, got any stock valve covers for a 1971 307 CID??? __________________ Rather be fishin'

01-06-2004, 02:06 AM	#8
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	Ive got Some "O" Rods same differnce as X they have had the beams polished to relive the chance of stress crackin they will need to be resized they have minor rust from sitting. Ive got some covers but not really any off of a 71 307 all the ones i have have the wire tabs except for one pair that i removed them i think i have pics listed in the 73-87 parts board under various parts. Last edited by 1972C10; 01-06-2004 at 02:09 AM.

01-06-2004, 02:28 AM	#9
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	PEACHJERKER I HAVE A SET OF STOCK COVERS OFF OF A 70 307 THAT CAME OUT OF MY 70 NOVA. I WILL TRY TO ROUND THEM UP, IF I AM NOT WRONG I THINK I BEAD BLASTED THEM AND RESTORED THEM TO THE CORRECT CHEVY ORANGE COLOR (PLASTICOAT PAINT) __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

01-06-2004, 10:53 AM	#10
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	1972C10- Watcha doing with that Chinese rifle?

01-06-2004, 06:42 PM	#11
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,767	ANYBODY ELSE GOT A 055 INTAKE???????????? __________________ Things happen for a reason!

01-06-2004, 07:58 PM	#12
fast71 Drive it like U stole it Join Date: Mar 2000 Location: tunnel hill ,GA /Chatt,TN Posts: 956	I found this on classicars auto racing rules M. Any standard production GM small block Chevy intake for cars and trucks allowed. Commonly used casting numbers are 14057055, 14014432 and 10185063. They can be of 2 or 4-barrel design and cast iron or aluminum. They all have to be of the late model emissions type with EGR valve mount on the intake. It can be plugged off and not functional. No porting or polishing allowed. Any carburetor spacer or adapter and thickness allowed. __________________ 71 custom 10 swb 72 nova ss 72 nova custom 87 s10 96 burb 94 camry 53 5 window 3100

01-06-2004, 09:25 PM	#14
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,848	I know I have the rods and I might have an intake __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

01-06-2004, 10:41 PM	#15
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,767	JDL send me some pics of the rods where there marked X and the intake at the back of it also 055! www.drsnipes@comporium.net thanks __________________ Things happen for a reason!

01-07-2004, 12:41 AM	#16
robby Semper Fidelis Join Date: Dec 2001 Location: Cedar City, Utah Posts: 654	Is that an SKS with the magazine conversion? __________________ 72 Chevy C 20 with 402 For sale 85 GMC K2500 83 Trans Am Cedar City, Utah (Missouri Native)



Register or Log In To remove these advertisements.

01-07-2004, 07:01 PM	#17
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,767	STILL LOOKIN 4 A INTAKE AND SOME XRODS!!!!!!!!!! HHHHHHEEEELLLLLPPPPPPP!!!!!!!!!!!!!!!!!!!! __________________ Things happen for a reason!

01-08-2004, 02:31 AM	#18
Pardue'sCustoms Account Suspended Join Date: Feb 2003 Location: Jonesville NC Posts: 618	i got a 307 ill look and see for you i got a factory alummanium intake

01-08-2004, 03:23 PM	#19
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,948	i have a factory aluminum 053 intake if im not mistaken it came off of a vette its got the spreadbore pattern on it __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

01-09-2004, 12:12 AM	#20
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,767	OK guys yall doing good I think I got 1 intake and aset of X rods but I still NEED a intake with the last 3 digits 055 in the casting #s.It come off a 84 to 86 Van with a 350!And it has to be a cast intake! __________________ Things happen for a reason!

01-09-2004, 03:53 PM	#21
NEEDaCELICA Registered User Join Date: Jun 2003 Posts: 26	ive got an offenhauser high rise intake manifold for a 350 for sale, i dont know how big the ports are but im pretty sure there bigger then any stock ones

01-10-2004, 09:32 PM	#24
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	055 intake i got an 055 intake today let me know if you still need it.

01-10-2004, 11:36 PM	#25
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,767	1972 c10 you got a PM! __________________ Things happen for a reason!

Register or Log In To remove these advertisements.