TX WTB - Suburban reverse plug - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kev2809 · 01-27-2023, 09:17 PM

looking for the plug that the reverse bulb goes into, both sides. ordered a set from LMC and they dont seem right. not sure if the truck ones are the same?

**nightmare** · 01-27-2023, 09:45 PM

Yeah, truck reverse light buckets are different than the suburban. They are not reproduced from what I can find

kev2809 · 01-27-2023, 10:19 PM

Quote:

Originally Posted by nightmare

Yeah, truck reverse light buckets are different than the suburban. They are not reproduced from what I can find

I have the buckets. I need the actual wiring plug. I used a universal harness, then I ordered what was supposed to be the reverse plugs from LMC, and there's no way they are right. they don't have any way to latch to the bucket like the top running/brake light plug does

**3757chevy** · 01-28-2023, 03:38 PM

I had that issue ,did this. https://67-72chevytrucks.com/vboard/...8&postcount=70 It's only available in a rear body harness from what I have found. https://chevrolet.obsoleteandclassic...o_Page_281.jpg Part # P6768-80075-A.

kev2809 · 01-28-2023, 04:59 PM

Quote:

Originally Posted by 3757chevy

I had that issue ,did this. https://67-72chevytrucks.com/vboard/...8&postcount=70 It's only available in a rear body harness from what I have found. https://chevrolet.obsoleteandclassic...o_Page_281.jpg Part # P6768-80075-A.

damn I knew I had the wrong plugs, and they dont sell the right ones it seems. so where did you get that connection that squeezes in?

**3757chevy** · 01-28-2023, 06:07 PM

Name: sleeve.jpg
Views: 123
Size: 31.2 KB

Name: screw.jpg
Views: 125
Size: 30.2 KB

Name: light connector 2.jpg
Views: 133
Size: 63.3 KB

Quote:

Originally Posted by kev2809

damn I knew I had the wrong plugs, and they sell the right ones it seems. so where did you get that connection that squeezes in?

The sleeves I made from a plastic sleeve left from a credit card printer paper roll cut to length and held in with a tiny screw . The picture shows the LMC connector on the left and my broken original on the right . the last picture is what the connector should look like. Which comes as part of the harness from https://chevrolet.obsoleteandclassic...o_Page_281.jpg.

kev2809 · 01-28-2023, 06:21 PM

ahhh gotcha thought u salvaged that idea from an existing plug somewhere. that rear harness in that link looks like the entire rear section. hate to pay 100 bucks for like a foot for each side. hopefully I can find someone cutting off from a good harness

**3757chevy** · 01-28-2023, 06:31 PM

Quote:

Originally Posted by kev2809

ahhh gotcha thought u salvaged that idea from an existing plug somewhere. that rear harness in that link looks like the entire rear section. hate to pay 100 bucks for like a foot for each side. hopefully I can find someone cutting off from a good harness

That's what I'm hoping for as well.

**Bgrdmoose** · 01-30-2023, 12:21 PM

This what you are looking for?
-Zack

https://www.ebay.com/itm/27246450068...mis&media=COPY

kev2809 · 01-30-2023, 01:34 PM

Quote:

Originally Posted by Bgrdmoose

This what you are looking for?
-Zack

https://www.ebay.com/itm/27246450068...mis&media=COPY

that looks like it will work! would have to buy 2 harnesses though lol

still hoping to find a cut off in good shape, but if not...that ebay link will have to work. thanks for posting that

**jimmy70** · 01-30-2023, 04:22 PM

I may have a set of used ones / won't be till next weekend that I get out to my storage unit. Let me know if you can wait. marko

**3757chevy** · 01-30-2023, 10:24 PM

Quote:

Originally Posted by Bgrdmoose

This what you are looking for?
-Zack

https://www.ebay.com/itm/27246450068...mis&media=COPY

That will work. It has the connector for a side marker light included that '67 and '68 does not use .('67 has no markers and '68 has reflectors only).

Quote:

Originally Posted by kev2809

that looks like it will work! would have to buy 2 harnesses though lol

The part I referenced is 1 side only, so you would need two of them,

Quote:

still hoping to find a cut off in good shape, but if not...that ebay link will have to work. thanks for posting that

The ebay price is a little better.

kev2809 · 01-30-2023, 11:14 PM

Quote:

Originally Posted by jimmy70

I may have a set of used ones / won't be till next weekend that I get out to my storage unit. Let me know if you can wait. marko

Quote:

Originally Posted by 3757chevy

That will work. It has the connector for a side marker light included that '67 and '68 does not use .('67 has no markers and '68 has reflectors only).
The part I referenced is 1 side only, so you would need two of them,

The ebay price is a little better.

Richard2717 had a set from a 72 suburban, so I should be in business! thanks for the help everyone, now I get to see if I messed up the reverse wiring lol

**3757chevy** · 01-30-2023, 11:28 PM

Quote:

Originally Posted by kev2809

Richard2717 had a set from a 72 suburban, so I should be in business! thanks for the help everyone, now I get to see if I messed up the reverse wiring lol

Great.

My hack is working but if I find good used OE replacements I'd go back and change it back.

01-27-2023, 09:17 PM	#1
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,178	WTB - Suburban reverse plug looking for the plug that the reverse bulb goes into, both sides. ordered a set from LMC and they dont seem right. not sure if the truck ones are the same? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-28-2023, 03:38 PM	#4
3757chevy Senior Member Join Date: Mar 2016 Location: Near Canon City ,Colorado Posts: 4,070	Re: WTB - Suburban reverse plug I had that issue ,did this. https://67-72chevytrucks.com/vboard/...8&postcount=70 It's only available in a rear body harness from what I have found. https://chevrolet.obsoleteandclassic...o_Page_281.jpg Part # P6768-80075-A. __________________ '35 1/2 ton Pickup (bought 2020) '68 C10 Suburban (bought 2021) '72 K5 Blazer (bought 2013) '67 Stepside (bought 1997-sold 2021) '96 Bronco Eddie Bauer (inherited 2010) My 1st day here-'67 C10(sold)and '72 K5 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=702056 "Another Blue Chevy"(1935) http://67-72chevytrucks.com/vboard/s...d.php?t=799203 '68 Burb...https://67-72chevytrucks.com/vboard/...d.php?t=822994 MIKE

01-28-2023, 06:21 PM	#7
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,178	Re: WTB - Suburban reverse plug ahhh gotcha thought u salvaged that idea from an existing plug somewhere. that rear harness in that link looks like the entire rear section. hate to pay 100 bucks for like a foot for each side. hopefully I can find someone cutting off from a good harness __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-30-2023, 12:21 PM	#9
Bgrdmoose Senior Member Join Date: Aug 2012 Location: College Park, MD Posts: 437	Re: WTB - Suburban reverse plug This what you are looking for? -Zack https://www.ebay.com/itm/27246450068...mis&media=COPY

01-30-2023, 04:22 PM	#11
jimmy70 Senior Member Join Date: Aug 2007 Location: Warren,Michigan Posts: 1,158	Re: WTB - Suburban reverse plug I may have a set of used ones / won't be till next weekend that I get out to my storage unit. Let me know if you can wait. marko



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.