NP205 Stick Pivot Bolt. You Must Be Kidding… - The 1947 - Present Chevrolet & GMC Truck Message Board Network

zac · 02-09-2023, 08:00 PM

$90-$100!? If they have it. Which they don’t. Any realistic alternatives?

I was going to use the adapter from a ‘72 on my ‘70 burb because one of the bolt holes on the bottom for the mounting bolts was stripped. I’d run a long bolt all the way thru that hole and put a nut on the other side. Worked, kind of tacky. Oh well, I may just have to be tacky because I doubt I can pay $100 for a bolt. If I can find it…

franken · 02-09-2023, 08:41 PM

I won't promise it'll fit but this looks to be a lot less money.
https://jb-custom-fabrication.myshop...lt-upgrade-kit

**Accelo** · 02-09-2023, 09:34 PM

Quote:

Originally Posted by franken

I won't promise it'll fit but this looks to be a lot less money.
https://jb-custom-fabrication.myshop...lt-upgrade-kit

"Not intended for stock shifters". If somebody will measure on up I'll make you one.
Cost you postage is all.

Or?
https://www.ebay.com/itm/35449413967...Bk9SR-jXuo_HYQ
Cheers.

57taskforce · 02-10-2023, 01:23 PM

My local machine shop is able to make them. Might look into that route if you are wanting new. You could always pay to subscribe and post a want to buy here on the classifieds board. They come up for sale semi frequently there.

**jeffahart** · 02-10-2023, 02:30 PM

I am currently using the JB bolt, it's a 9/16 on the threads, plus I had to use my own bushings. I use an aluminum advance adapters aftermarket transfer case adapter so the threads were larger than my stock cast iron adapter, it had 7/16(I'm pretty sure) Check the threads. I also have and non bushing bolt with a 9/16, but I like the bronze bushings better, it has a smooth action.

But, if Accelo makes one for you that the best answer/solution.

j

**special-K** · 02-11-2023, 09:46 AM

Where did you see the bolt for $90-$100?

zac · 02-11-2023, 09:20 PM

Anybody that has the original new GM bolt, part #14009313, wants about $100 for it. Looks like it’s been discontinued. That’s the greasable one.

Thanks for the responses. I just ended up welding a new head on the old one I had. Took too long, probably should have spent the money. If anybody is interested, sbc valve spring shims are perfect for washers to take up any slack.

**Accelo** · 03-06-2023, 12:50 AM

I made one, based on one I had here, that may or may not be correct.
Here is a picture, the threads are 1/2" NC. Somehow I don't think that correct.
If it will works for someone it's $30 includes shipping.
I can drill it for the grease fitting if that's important.

02-09-2023, 08:41 PM	#2
franken Registered User Join Date: Jun 2013 Location: Somewhere Posts: 3,128	Re: NP205 Stick Pivot Bolt. You Must Be Kidding… I won't promise it'll fit but this looks to be a lot less money. https://jb-custom-fabrication.myshop...lt-upgrade-kit

02-10-2023, 01:23 PM	#4
57taskforce All about them K’s Join Date: Jun 2014 Location: Land of Entrapment Posts: 6,503	Re: NP205 Stick Pivot Bolt. You Must Be Kidding… My local machine shop is able to make them. Might look into that route if you are wanting new. You could always pay to subscribe and post a want to buy here on the classifieds board. They come up for sale semi frequently there. __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s

02-10-2023, 02:30 PM	#5
jeffahart Senior Member Join Date: May 2012 Location: Scottsdale, AZ Posts: 1,907	Re: NP205 Stick Pivot Bolt. You Must Be Kidding… I am currently using the JB bolt, it's a 9/16 on the threads, plus I had to use my own bushings. I use an aluminum advance adapters aftermarket transfer case adapter so the threads were larger than my stock cast iron adapter, it had 7/16(I'm pretty sure) Check the threads. I also have and non bushing bolt with a 9/16, but I like the bronze bushings better, it has a smooth action. But, if Accelo makes one for you that the best answer/solution. j __________________ White K20

02-11-2023, 09:46 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: NP205 Stick Pivot Bolt. You Must Be Kidding… Where did you see the bolt for $90-$100? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-11-2023, 09:20 PM	#7
zac Registered User Join Date: Jul 2008 Location: louisville, ky Posts: 502	Re: NP205 Stick Pivot Bolt. You Must Be Kidding… Anybody that has the original new GM bolt, part #14009313, wants about $100 for it. Looks like it’s been discontinued. That’s the greasable one. Thanks for the responses. I just ended up welding a new head on the old one I had. Took too long, probably should have spent the money. If anybody is interested, sbc valve spring shims are perfect for washers to take up any slack.

02-09-2023, 08:00 PM	#1
zac Registered User Join Date: Jul 2008 Location: louisville, ky Posts: 502	NP205 Stick Pivot Bolt. You Must Be Kidding… $90-$100!? If they have it. Which they don’t. Any realistic alternatives? I was going to use the adapter from a ‘72 on my ‘70 burb because one of the bolt holes on the bottom for the mounting bolts was stripped. I’d run a long bolt all the way thru that hole and put a nut on the other side. Worked, kind of tacky. Oh well, I may just have to be tacky because I doubt I can pay $100 for a bolt. If I can find it…

03-06-2023, 12:50 AM	#8
Accelo Senior Member Join Date: Mar 2015 Location: washington Posts: 2,300	Re: NP205 Stick Pivot Bolt. You Must Be Kidding… I made one, based on one I had here, that may or may not be correct. Here is a picture, the threads are 1/2" NC. Somehow I don't think that correct. If it will works for someone it's $30 includes shipping. I can drill it for the grease fitting if that's important. Attached Images Last edited by Accelo; 03-26-2023 at 01:59 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.