WTB: Need some gauges, cheap!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jorgensensc · 01-06-2004, 03:49 PM

Hey all, it looks like my gauges are going the way of the dinosaur. I am in need of an ammeter gauge, temp gauge, and a fuel gauge. Mine are all shot. The faces don't have to be great (I will get more gauge decals from duranged design). I know these gauges are not that expensive new, but I hoped that some folks around here would have some extras laying around they want to let go cheap!!! I would also like to find the metal plate that lays on top of the plastic lense for a factory tach, with no air pressure. The p.o. cut a non tach back to add a tach to this gauge cluster, and it doesn't have the ring that goes around the front side. Thanks for all of your help!!!
Shawn

P.S.
Wes, I saw all those gauges you had when you were building your latest gauge cluster, you gotta have something there

dinnut · 01-06-2004, 07:07 PM

randy70-c10 has some check with him
http://67-72chevytrucks.com/vboard/s...threadid=84097

**Ironhorse** · 01-06-2004, 07:09 PM

Not sure if this is what you are looking for but I have a complete dash set-up from a 71 with gauges. No printed circut but gauges are all there and very useable. Bezel is complete, paint worn on edges, lens is good, has backing plate complete. $25 plus shipping if interested.

**jerry moss** · 01-06-2004, 10:46 PM

i have both halves of tach sheetmetal, brand new. i bought a tach kit and didn't use either sheetmetal piece. $40.00 plus shipping

jorgensensc · 01-06-2004, 11:16 PM

Jerry moss,
Thank you very much for the offer, but unfortunately that is a little out of price range right now (since I need new gauges too). If I have the money soon I will definately give you a ring though. Thanks again!!
Shawn

griesel72 · 01-07-2004, 12:16 AM

Try Teeitup

The last time i was over there, he had about three truck cabs full of gauge panels out of our trucks

714x4lover · 01-07-2004, 09:27 PM

i have two sets of each gauge you need plus the metal, hell i have two complete instrument panels hows 25 each plus the ride

**Palf70Step** · 01-07-2004, 11:23 PM

I have a complete gauge cluster/panel if you want. It came out of a 68 and they worked when I got them...I have since gotten a custon dash panel. I paid $20 for the one and you can have it for that plus shipping if interested.

01-06-2004, 03:49 PM	#1
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	WTB: Need some gauges, cheap!!! Hey all, it looks like my gauges are going the way of the dinosaur. I am in need of an ammeter gauge, temp gauge, and a fuel gauge. Mine are all shot. The faces don't have to be great (I will get more gauge decals from duranged design). I know these gauges are not that expensive new, but I hoped that some folks around here would have some extras laying around they want to let go cheap!!! I would also like to find the metal plate that lays on top of the plastic lense for a factory tach, with no air pressure. The p.o. cut a non tach back to add a tach to this gauge cluster, and it doesn't have the ring that goes around the front side. Thanks for all of your help!!! Shawn P.S. Wes, I saw all those gauges you had when you were building your latest gauge cluster, you gotta have something there __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

01-06-2004, 07:07 PM	#2
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	randy70-c10 has some check with him http://67-72chevytrucks.com/vboard/s...threadid=84097 __________________ 70 longbed 496/th400/Ford 9"

01-06-2004, 07:09 PM	#3
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,154	Not sure if this is what you are looking for but I have a complete dash set-up from a 71 with gauges. No printed circut but gauges are all there and very useable. Bezel is complete, paint worn on edges, lens is good, has backing plate complete. $25 plus shipping if interested. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-06-2004, 10:46 PM	#4
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,855	tach sheetmetal i have both halves of tach sheetmetal, brand new. i bought a tach kit and didn't use either sheetmetal piece. $40.00 plus shipping __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

01-06-2004, 11:16 PM	#5
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Jerry moss, Thank you very much for the offer, but unfortunately that is a little out of price range right now (since I need new gauges too). If I have the money soon I will definately give you a ring though. Thanks again!! Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

01-07-2004, 12:16 AM	#6
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	Try Teeitup The last time i was over there, he had about three truck cabs full of gauge panels out of our trucks __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

01-07-2004, 09:27 PM	#7
714x4lover Registered User Join Date: Jun 2002 Location: Show Low, Arizona Posts: 211	gauges i have two sets of each gauge you need plus the metal, hell i have two complete instrument panels hows 25 each plus the ride

01-07-2004, 11:23 PM	#8
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,768	I have a complete gauge cluster/panel if you want. It came out of a 68 and they worked when I got them...I have since gotten a custon dash panel. I paid $20 for the one and you can have it for that plus shipping if interested. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.