ID 1968 GMC K2500 3/4 ton 4x4 Long Bed Stepper - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**landarts** · 05-01-2023, 05:01 PM

This truck was rescued from a field a couple of years ago out of California. Dropped in a 292 six-cylinder motor with the proper cross member and mounts.
The truck had a bent tie rod up front that only let it turn to the right. That was replaced with a brand new tie rod and end fittings from Barnes 4x4, 1-ton version. Everything turns great now. The passenger side stepside fender and step were crushed in. Metal worked the fender to look very presentable and replaced both steps with a set from the forum. Installed new ignition with tumbler, wiring harness under the hood from American Autowire, new hoses, belts, ect when installing motor. The bed wood and metal strips are toast but purchased new Ash wood, metal strips and hardware for the bed that go with the truck. The truck has factory-stock 17" rims that are noted on the pieced-together build sheet.

The truck is a good running and driving truck that could be used as is or finished up to the next level. The truck is registered in Vermont with a current plate and registration. Vermont does not issue titles for anything over 15 years old. Take the registration to any DMV and they will turn that registration into a title or leave it registered in Vermont which will cost about $70 per year.

No trades, I am thinning the herd. $9400

**landarts** · 05-01-2023, 05:03 PM

Here are a few more pictures

**DREW67** · 05-02-2023, 07:59 AM

Very Nice!!!!

**68bowtie** · 05-02-2023, 09:30 AM

That’s pure awesomeness right there. I wouldn’t change a thing.

**DREW67** · 05-02-2023, 04:11 PM

What does the cab supports look like?

**landarts** · 05-02-2023, 04:33 PM

Quote:

Originally Posted by DREW67

What does the cab supports look like?

I actually don't remember them being bad. I will go over to storage lot where the truck is parked right now and get a few pictures.

**landarts** · 05-02-2023, 05:20 PM

Drew67 I sent you a PM

CKfan · 05-10-2023, 10:56 AM

Great looking truck and nice work on that build sheet puzzle.

Shift pattern decal is in incredible shape. If you get time, please post a pic of the Jack Inst. decal and SPID if you have it.

Going to make someone a great project, wish I was closer.

72 k15 · 05-13-2023, 12:20 PM

Sent you a PM

**landarts** · 05-15-2023, 09:13 PM

Sale is Pending to 72 K15

**landarts** · 05-27-2023, 09:49 AM

Truck is SOLD and going to North Dakota for member "72 K15"

72 k15 · 05-27-2023, 06:08 PM

Landarts is great to deal with, now to find a shipper not so sure I trust all these brokers.

best view · 05-27-2023, 07:06 PM

Hard to find someone better

72 k15 · 05-27-2023, 07:38 PM

If anybody knows of a good shipper let me know.

**68bowtie** · 05-27-2023, 08:15 PM

Are you gonna do some kind of thread so we can watch what you do with it?

72 k15 · 05-27-2023, 08:20 PM

Yeah I probably will, I plan on getting new rims on and tires and driving it for the summer doing small fixing things, wirring bed wood stuff like that, and eventually hopefully a nv4500 and np205 and newer Dana 44 axle

05-01-2023, 05:01 PM	#1
landarts landarts Join Date: May 2005 Location: Star, Idaho Posts: 1,413	1968 GMC K2500 3/4 ton 4x4 Long Bed Stepper This truck was rescued from a field a couple of years ago out of California. Dropped in a 292 six-cylinder motor with the proper cross member and mounts. The truck had a bent tie rod up front that only let it turn to the right. That was replaced with a brand new tie rod and end fittings from Barnes 4x4, 1-ton version. Everything turns great now. The passenger side stepside fender and step were crushed in. Metal worked the fender to look very presentable and replaced both steps with a set from the forum. Installed new ignition with tumbler, wiring harness under the hood from American Autowire, new hoses, belts, ect when installing motor. The bed wood and metal strips are toast but purchased new Ash wood, metal strips and hardware for the bed that go with the truck. The truck has factory-stock 17" rims that are noted on the pieced-together build sheet. The truck is a good running and driving truck that could be used as is or finished up to the next level. The truck is registered in Vermont with a current plate and registration. Vermont does not issue titles for anything over 15 years old. Take the registration to any DMV and they will turn that registration into a title or leave it registered in Vermont which will cost about $70 per year. No trades, I am thinning the herd. $9400 Attached Images __________________ Super Cheyenne aka the "Devil Cowboy" 71 K20 Idaho Edition 69 K10 from the Field 68 Second Chance Fix and Sale 72 GMC 3/4 ton 4x4 K2500 The "Fixrupr" build thread 72 Cheyenne 1/2 ton " FIXRUPR " - daily driver 67 C20 all original paint 71 K20 Custom 4x4 (Idaho Edition) 72 K20 GMC Super Custom 4x4 72 K20 Custom Deluxe 4x4 69 K10 Custom package 4x4 (69 K10 from the field) 72 K10 Custom 71 K10 Custom 72 K20 Custom Deluxe 4x4 72 K20 Crew Cab Project 71 GMC Jimmy CST 72 Blazer 70 Blazer

05-01-2023, 05:03 PM	#2
landarts landarts Join Date: May 2005 Location: Star, Idaho Posts: 1,413	Re: 1968 GMC K2500 3/4 ton 4x4 Long Bed Stepper Here are a few more pictures Attached Images __________________ Super Cheyenne aka the "Devil Cowboy" 71 K20 Idaho Edition 69 K10 from the Field 68 Second Chance Fix and Sale 72 GMC 3/4 ton 4x4 K2500 The "Fixrupr" build thread 72 Cheyenne 1/2 ton " FIXRUPR " - daily driver 67 C20 all original paint 71 K20 Custom 4x4 (Idaho Edition) 72 K20 GMC Super Custom 4x4 72 K20 Custom Deluxe 4x4 69 K10 Custom package 4x4 (69 K10 from the field) 72 K10 Custom 71 K10 Custom 72 K20 Custom Deluxe 4x4 72 K20 Crew Cab Project 71 GMC Jimmy CST 72 Blazer 70 Blazer

05-02-2023, 07:59 AM	#3
DREW67 Senior Member Join Date: Aug 2001 Location: Kansas City, Mo Posts: 1,031	Re: 1968 GMC K2500 3/4 ton 4x4 Long Bed Stepper Very Nice!!!! __________________ DREW67

05-02-2023, 09:30 AM	#4
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,795	Re: 1968 GMC K2500 3/4 ton 4x4 Long Bed Stepper That’s pure awesomeness right there. I wouldn’t change a thing. __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

05-02-2023, 04:11 PM	#5
DREW67 Senior Member Join Date: Aug 2001 Location: Kansas City, Mo Posts: 1,031	Re: 1968 GMC K2500 3/4 ton 4x4 Long Bed Stepper What does the cab supports look like? __________________ DREW67

05-02-2023, 05:20 PM	#7
landarts landarts Join Date: May 2005 Location: Star, Idaho Posts: 1,413	Re: 1968 GMC K2500 3/4 ton 4x4 Long Bed Stepper Drew67 I sent you a PM __________________ Super Cheyenne aka the "Devil Cowboy" 71 K20 Idaho Edition 69 K10 from the Field 68 Second Chance Fix and Sale 72 GMC 3/4 ton 4x4 K2500 The "Fixrupr" build thread 72 Cheyenne 1/2 ton " FIXRUPR " - daily driver 67 C20 all original paint 71 K20 Custom 4x4 (Idaho Edition) 72 K20 GMC Super Custom 4x4 72 K20 Custom Deluxe 4x4 69 K10 Custom package 4x4 (69 K10 from the field) 72 K10 Custom 71 K10 Custom 72 K20 Custom Deluxe 4x4 72 K20 Crew Cab Project 71 GMC Jimmy CST 72 Blazer 70 Blazer

05-10-2023, 10:56 AM	#8
CKfan Registered User Join Date: Nov 2022 Location: CA Posts: 292	Re: 1968 GMC K2500 3/4 ton 4x4 Long Bed Stepper Great looking truck and nice work on that build sheet puzzle. Shift pattern decal is in incredible shape. If you get time, please post a pic of the Jack Inst. decal and SPID if you have it. Going to make someone a great project, wish I was closer.

05-13-2023, 12:20 PM	#9
72 k15 Registered User Join Date: Sep 2018 Location: Fargo Posts: 379	Re: 1968 GMC K2500 3/4 ton 4x4 Long Bed Stepper Sent you a PM __________________ 1959 GMC 100 3 on the tree 270. 1968 GMC k2500 Stepside 1972 Chevy Monte Carlo Custom.

05-15-2023, 09:13 PM	#10
landarts landarts Join Date: May 2005 Location: Star, Idaho Posts: 1,413	Re: 1968 GMC K2500 3/4 ton 4x4 Long Bed Stepper Sale is Pending to 72 K15 __________________ Super Cheyenne aka the "Devil Cowboy" 71 K20 Idaho Edition 69 K10 from the Field 68 Second Chance Fix and Sale 72 GMC 3/4 ton 4x4 K2500 The "Fixrupr" build thread 72 Cheyenne 1/2 ton " FIXRUPR " - daily driver 67 C20 all original paint 71 K20 Custom 4x4 (Idaho Edition) 72 K20 GMC Super Custom 4x4 72 K20 Custom Deluxe 4x4 69 K10 Custom package 4x4 (69 K10 from the field) 72 K10 Custom 71 K10 Custom 72 K20 Custom Deluxe 4x4 72 K20 Crew Cab Project 71 GMC Jimmy CST 72 Blazer 70 Blazer

05-27-2023, 09:49 AM	#11
landarts landarts Join Date: May 2005 Location: Star, Idaho Posts: 1,413	Re: 1968 GMC K2500 3/4 ton 4x4 Long Bed Stepper Truck is SOLD and going to North Dakota for member "72 K15" __________________ Super Cheyenne aka the "Devil Cowboy" 71 K20 Idaho Edition 69 K10 from the Field 68 Second Chance Fix and Sale 72 GMC 3/4 ton 4x4 K2500 The "Fixrupr" build thread 72 Cheyenne 1/2 ton " FIXRUPR " - daily driver 67 C20 all original paint 71 K20 Custom 4x4 (Idaho Edition) 72 K20 GMC Super Custom 4x4 72 K20 Custom Deluxe 4x4 69 K10 Custom package 4x4 (69 K10 from the field) 72 K10 Custom 71 K10 Custom 72 K20 Custom Deluxe 4x4 72 K20 Crew Cab Project 71 GMC Jimmy CST 72 Blazer 70 Blazer

05-27-2023, 06:08 PM	#12
72 k15 Registered User Join Date: Sep 2018 Location: Fargo Posts: 379	Re: 1968 GMC K2500 3/4 ton 4x4 Long Bed Stepper Landarts is great to deal with, now to find a shipper not so sure I trust all these brokers. __________________ 1959 GMC 100 3 on the tree 270. 1968 GMC k2500 Stepside 1972 Chevy Monte Carlo Custom.

05-27-2023, 07:06 PM	#13
best view Registered User Join Date: Apr 2009 Location: newbury new hampsire Posts: 2,150	Re: 1968 GMC K2500 3/4 ton 4x4 Long Bed Stepper Hard to find someone better

05-27-2023, 07:38 PM	#14
72 k15 Registered User Join Date: Sep 2018 Location: Fargo Posts: 379	Re: 1968 GMC K2500 3/4 ton 4x4 Long Bed Stepper If anybody knows of a good shipper let me know. __________________ 1959 GMC 100 3 on the tree 270. 1968 GMC k2500 Stepside 1972 Chevy Monte Carlo Custom.

05-27-2023, 08:15 PM	#15
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,795	Re: 1968 GMC K2500 3/4 ton 4x4 Long Bed Stepper Are you gonna do some kind of thread so we can watch what you do with it? __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

05-27-2023, 08:20 PM	#16
72 k15 Registered User Join Date: Sep 2018 Location: Fargo Posts: 379	Re: 1968 GMC K2500 3/4 ton 4x4 Long Bed Stepper Yeah I probably will, I plan on getting new rims on and tires and driving it for the summer doing small fixing things, wirring bed wood stuff like that, and eventually hopefully a nv4500 and np205 and newer Dana 44 axle __________________ 1959 GMC 100 3 on the tree 270. 1968 GMC k2500 Stepside 1972 Chevy Monte Carlo Custom.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.