sorry guys... another question,, wheels this time - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**michael bustamante** · 07-05-2023, 02:33 PM

so i got some steelies finally that will look good on my 67GMC,
i need to find the longer clips to hold on the 3/4 ton caps,
half ton clips are too short.. any of you guys know a guy? or a vender?

**jocko** · 07-06-2023, 11:36 PM

I don't know if these are the correct size - but you might ask Chevs of the 40's for some measurements to see if it's what you need.

**michael bustamante** · 07-07-2023, 01:17 PM

good idea. thank you
UPDATE . THEY SAID THEY WERE FOR 1/2 TON ONLY

factorystock · 07-08-2023, 07:01 AM

The only clips that will work is clips off an period 8 lug wheel ( 1948-1968). Unfortunately, many of these rims have got scrapped, but not all, some are still found in older wrecking yards. Bring a chisel.

**michael bustamante** · 07-09-2023, 07:40 PM

Quote:

Originally Posted by factorystock

The only clips that will work is clips off an period 8 lug wheel ( 1948-1968). Unfortunately, many of these rims have got scrapped, but not all, some are still found in older wrecking yards. Bring a chisel.

Unfortunately all the wrecking yards here in Albuquerque and surrounding area have got rid of all their older vehicles. They concentrate on 1990s on up anymore around here

07-05-2023, 02:33 PM	#1
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	sorry guys... another question,, wheels this time so i got some steelies finally that will look good on my 67GMC, i need to find the longer clips to hold on the 3/4 ton caps, half ton clips are too short.. any of you guys know a guy? or a vender? __________________ 1967custom

07-06-2023, 11:36 PM	#2
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,975	Re: sorry guys... another question,, wheels this time I don't know if these are the correct size - but you might ask Chevs of the 40's for some measurements to see if it's what you need.

07-07-2023, 01:17 PM	#3
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: sorry guys... another question,, wheels this time good idea. thank you UPDATE . THEY SAID THEY WERE FOR 1/2 TON ONLY __________________ 1967custom Last edited by michael bustamante; 07-07-2023 at 02:20 PM.

07-08-2023, 07:01 AM	#4
factorystock Registered User Join Date: Feb 2007 Location: west coast Posts: 3,396	Re: sorry guys... another question,, wheels this time The only clips that will work is clips off an period 8 lug wheel ( 1948-1968). Unfortunately, many of these rims have got scrapped, but not all, some are still found in older wrecking yards. Bring a chisel.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.