self-retracting seat belts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**MikeB** · 07-06-2023, 04:25 PM

I need a pair of self-retracting seat belts. However, I'd like to find some that don't get tighter and tighter as I'm driving. You all know what I mean.

Any suggestions?

fun in dirt · 07-06-2023, 04:43 PM

Quote:

Originally Posted by MikeB

I need a pair of self-retracting seat belts. However, I'd like to find some that don't get tighter and tighter as I'm driving. You all know what I mean.

Any suggestions?

I got some out of of a junked truck - '96 Chevy truck.
However if you are already using a 3pt harness, be aware that a wrong angle of the reel on floor may be making it tighten up as you drive

**Steeveedee** · 07-06-2023, 05:10 PM

I bought a set from LMC. Lap and shoulder in one. I guess that's called 3-point? They use an inertial reel, so you have to pull them out slowly, but they don't cinch up ma.

**MikeB** · 07-06-2023, 05:54 PM

Thanks for the responses. The pair I had in my 82 truck may have had the inertia reel angled forward, which could have created the problem.

07-06-2023, 04:25 PM	#1
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,599	self-retracting seat belts I need a pair of self-retracting seat belts. However, I'd like to find some that don't get tighter and tighter as I'm driving. You all know what I mean. Any suggestions? __________________ Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, recent AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!

07-06-2023, 05:10 PM	#3
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,723	Re: self-retracting seat belts I bought a set from LMC. Lap and shoulder in one. I guess that's called 3-point? They use an inertial reel, so you have to pull them out slowly, but they don't cinch up ma. __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

07-06-2023, 05:54 PM	#4
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,599	Re: self-retracting seat belts Thanks for the responses. The pair I had in my 82 truck may have had the inertia reel angled forward, which could have created the problem. __________________ Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, recent AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.