FRANKENTRUCK's GVWR door sticker?

[asphaltburner]

I could not get my GVWR sticker off cleanly during my driver's door replacement. Nearly, but the edges of the paper underneath delaminated,...
All of the info portion came off great - just the upper edges are messed up.
I was wondering if it is possible to get a reproduction?
Thanks all.

[asphaltburner]

Ya know,...this sticker, on the rear edge of the driver's door:

[Getter-Done]

I thought there was a thread about this with the answer.

Hopefully member Keith Seymore will see this.
He would know.

Here is a very old thread.
Link: https://67-72chevytrucks.com/vboard/...r+reproduction

Here is the Thread I was thinking of.
I don't know how much it would help to contact them .
It's worth a try.

GM CUSTOMER SERVICE (Canada and the United States only) # 1-800-222-1020

CHEVROLET
P.O. Box 33170
Detroit, Michigan 48232-5170

Link: https://67-72chevytrucks.com/vboard/...+vin+documents

Hope this Helps.

[72c20customcamper]

Door info tag replacement

https://www.ecsvin.com/

[asphaltburner]

Cool! I'll see what I can do with this info,...FRANKENTRUCK has it's original door threshold info plate, but since I've replaced the driver's door, the GVWR and tire pressure sticker (from the door's outer edge) came off with the door.
I've salvaged enough of the original, that I might be able to 're-construct' it with a new printed black and white margin area,...
Thanks, all!

[asphaltburner]

I'd like to see if I can just "repair" my old sticker that I was able to peel off fairly intact. All of my truck info areas are intact - just the border area is damaged.
I'm looking for a good pic, like this one:



I was hoping one of you guys might take one and post it,...
Thanks, in advance!

[asphaltburner]

Will no one post a picture of this data sticker, for me?! PLEASE,...

[TKCR]

I got mine done. Name is on the invoice in the picture.
After install. I never had one. It was removed by the PO.

[Getter-Done]

Here's my original on my 84.

[TKCR]

Just did

[asphaltburner]

Thanks, TKCR! I'll contact ECS Concepts,...I can't piece together a sticker background from any of these photos, so I'll replace the original.
Thank you, guys!

P.S. Cool! I just emailed them,...

[asphaltburner]

WELL.
I don't know what you paid to get your repro sticker, TKCR, but I found the quote that I got from ECS Concepts to be a lot more than what I will pay for a plastic sticker,...especially a GVWR. It's no data plate!
Anyway, I was wondering if TKCR would be so kind as to take a really good, close picture of his new sticker, and post it here, so that I can use the photo for the GM background (or anyone else, that has a nice looking sticker)? Only the edges of my sticker are damaged.
Thanks!

[TKCR]

Originally Posted by asphaltburner

WELL.
I don't know what you paid to get your repro sticker, TKCR, but I found the quote that I got from ECS Concepts to be a lot more than what I will pay for a plastic sticker,...especially a GVWR. It's no data plate!
Anyway, I was wondering if TKCR would be so kind as to take a really good, close picture of his new sticker, and post it here, so that I can use the photo for the GM background (or anyone else, that has a nice looking sticker)? Only the edges of my sticker are damaged.
Thanks!

You’ll have to save the pic and then zoom in to get a better look. These are the only pics I have. I can’t go out and get another picture, because the truck resides in Virginia now. Sold it a few months back.

[asphaltburner]

Can't use it due to the light reflections,...

[Getter-Done]

I have a Red door in storage.

I thought it would not work with what you are trying to achieve.

Because it's (Red) bleed thru .

After Seeing TKCR picture, Her sticker looks like the one on my door in storage.

I can get you a picture of it.

[asphaltburner]

I'd sure appreciate it,...I just want to 'copy/paste' a good picture of the sticker, so that I can "steal" the white, outer border. Once I create a black and white "blank", I can add my old info from my peeled sticker. Then use my copier to print it all onto 'peel and stick' paper,...
ECS wanted $85 to reproduce the sticker,...

[Getter-Done]

The red door sticker as I thought will be no good to you.



Here is the best picture I could get this evening of the other door sticker.



It is not the best Quality sticker.

The top edge is frayed.
Maybe another Member has one in Better shape?

[TKCR]

I took my photo and tried to edt. Hope this helps

[Getter-Done]

Originally Posted by TKCR

I took my photo and tried to edt. Hope this helps

That Looks Great to Me

My Truck was Ruff when I got it.

[TKCR]

Originally Posted by Getter-Done

That Looks Great to Me

My Truck was Ruff when I got it.

I got to thinking about and thought I would try and edit the photo. At least the glare isn’t as bad as the original photo.

[asphaltburner]

Now, THAT photo I might be able to use! Thanks for everyone's efforts, I really appreciate it! I'll let you know how I make out with MY 'reproduction'.
I cannot believe that something this common, could be SO hard to reproduce,...and that it is not readily available. I guess that it's just been TOO DAMN LONG AGO!
Sure does make ME feel REALLY OLD,...
Thanks again!!

[TKCR]

Originally Posted by asphaltburner

Now, THAT photo I might be able to use! Thanks for everyone's efforts, I really appreciate it! I'll let you know how I make out with MY 'reproduction'.
I cannot believe that something this common, could be SO hard to reproduce,...and that it is not readily available. I guess that it's just been TOO DAMN LONG AGO!
Sure does make ME feel REALLY OLD,...
Thanks again!!

It’s not hard to have it reproduced, you just weren’t willing to spend the money it took to do so. And since it is a legal tag, it should be done correctly. That’s why I forked out the money to have mine done, it was worth it to me. I wasn’t willing to risk doing it myself.
But it’s your truck, tag and money.
I was happy to help and hope it works out for you.
Good luck