Repo Cheyenne Super Wood Grain Bezel - Opinions? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rich72C10 · 08-14-2023, 04:33 PM

While I am still hoping to find a good used bezel, I am doubtful. So I been looking around for repo's because the sticker I used kind of sucks. Most places that have these for sell have horrible pictures and of course I haven't seen one first hand.

I got a seller to send me some close up photos. I know the forums are going to reduce the image quality but perhaps they are good enough for opinions and thoughts: pretty good, good enough or rubbish. This is from a seller off eBay but I believe looking at the original photo you can get it from various places.

Thanks in advance to you guys that have seen these Cheyenne Super bezels close up :-)

**davischevy** · 08-14-2023, 10:36 PM

It looks really good to me. I used to have originals rechromed and apply the woodgrain, but those are long gone. I have had good luck with the repos.

Rich72C10 · 08-14-2023, 10:51 PM

Well, that is one vote for it looking good. Thank you for you input!

I was thinking the same myself but I really haven't anything to judge that on (since I never seen one up close).

Edit:
Just read your profile Bio
"I'm 70 years old. I bought a 1972 Cheyenne (Orange and white) new and currently own a 1972 Cheyenne Super that I have owned since 1988. I did a frame off in 1989 and won "Best of Show" at Fort Smith, AR in 1990. I've put 30,000 miles on it since."

Gee, after reading that - your approval on this repo seems like gospel.

**yote1234** · 08-14-2023, 11:23 PM

whats your opinion on the GM nos woodgrain bezels that were silver painted not chromed?

heres some reading

http://67-72chevytrucks.com/vboard/s...d.php?t=666189

**davischevy** · 08-14-2023, 11:36 PM

Quote:

Originally Posted by yote1234

whats your opinion on the GM nos woodgrain bezels that were silver painted not chromed?

heres some reading

http://67-72chevytrucks.com/vboard/s...d.php?t=666189

I didn't go back through the thread, but my opinion is they are over the counter replacements.

Rich72C10 · 08-15-2023, 07:00 AM

I went ahead and bought it.

@yote1234 Those silver painted ones are odd looking to me!

**1970cstblazer** · 08-15-2023, 07:08 AM

The silver painted dash bezels look like crap. This was GM just being cheap, and thought it would be "good enough" for a replacement for a even then old truck. They still charged full price for half assed stuff though!

**yote1234** · 08-15-2023, 07:40 AM

Quote:

Originally Posted by Rich72C10

I went ahead and bought it.

@yote1234 Those silver painted ones are odd looking to me!

i agree

**special-K** · 08-15-2023, 09:24 AM

Yeah, the silver I don't consider N.O.S. since they are not what came in the trucks. N.O.R.S. is what they are, just like all the bar coded GM parts folks pass off as N.O.S. They are N.O.T., Not Old Taiwan, same as all repro, but GM has the right to pout their part number on them and put in a Genuine GM box. No bar codes used on packaging in 67-72. They were already in use internally. In fact, GM was one of the first to implement them.

Oh, and I agree with Other Larry. For me it was a '72 Highlander off the OK Used Car lot in '73 and at least one ever since

Rich72C10 · 08-18-2023, 10:40 PM

I got that reproduction Wood Grain Bezel in today from the eBay seller and just installed. I am not sure if I said this before (because I have had this cluster off a number of times) I really hate that oil line! I swear it takes me more time to get the fitting started than to cycle the whole cluster in and out!

Here is a photo, though lighting isn't so good at night in the garage.

truckster · 08-18-2023, 11:22 PM

I don't remember where I bought mine. It's been in for three years, and it's peeling just a little bit at one of the corners. My oldest son is really into woodworking, and I've thought about having him make me a really thin veneer out of real wood.

Rich72C10 · 08-18-2023, 11:26 PM

Quote:

Originally Posted by truckster

I don't remember where I bought mine. It's been in for three years, and it's peeling just a little bit at one of the corners. My oldest son is really into woodworking, and I've thought about having him make me a really thin veneer out of real wood.

I have a feeling this one will do that too after some time but I hope it isn't anytime soon!

truckster · 08-19-2023, 10:40 AM

It's not too bad. It's mostly next to the headlight switch.

Rich72C10 · 08-19-2023, 10:57 AM

That looks like heat damage - lots of direct sunlight perhaps? But it isn't to bad, especially that you have had it three years.

Extended Power · 08-20-2023, 11:24 AM

Quote:

Originally Posted by truckster

It's not too bad. It's mostly next to the headlight switch.

To me, it looks like the knob for the headlights was tightened up a bit too much, and pulled the decal.
All the stretch lines look like they are turning upwards...which would be the case with tightening the knob.
It would be very hard not to over tighten that knob, as I myself, like to have the panel pulled up against the dash, and without the decal on there, you can tighten it to the point of almost cracking the instrument panel.

Rich72C10 · 08-20-2023, 11:38 AM

ah, yes - I agree. I just saw that I did that to my wiper side...

truckster · 08-20-2023, 01:41 PM

Quote:

Originally Posted by Extended Power

To me, it looks like the knob for the headlights was tightened up a bit too much, and pulled the decal.
All the stretch lines look like they are turning upwards...which would be the case with tightening the knob.
It would be very hard not to over tighten that knob, as I myself, like to have the panel pulled up against the dash, and without the decal on there, you can tighten it to the point of almost cracking the instrument panel.

Rich's original guess is right - its from exposure to sun and heat. It took a couple of years for it to get that way. But it is a Blazer, and its natural condition is wth the top down...

D.B · 08-20-2023, 06:39 PM

A trick I learned in our shop when we installed decals on our service trucks was to spray over them with clear coat. So, when I installed my gauge bezel decal, I sprayed it with clear coat. That was over ten years ago, and it still looks new.

**DeadheadNM** · 08-20-2023, 07:47 PM

Here’s a NOS example fwiw

Rich72C10 · 08-20-2023, 07:54 PM

nice, did you score that one? lucky dog you! ;-)

**DeadheadNM** · 08-20-2023, 08:00 PM

I did get lucky and landed that. It was not a bargain but does have a chrome surround. I’m adding that to the k20 here soon.

Rich72C10 · 08-21-2023, 10:02 AM

I thought I'd take a photo through the sliding window - came out pretty good with the iPhone's flash.

So the bezel is the repo and the glove box wood grain I got off eBay that was from a 72 Cheyenne Super. Door wood grain came with the truck when I bought it :-)

08-14-2023, 04:33 PM	#1
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	Repo Cheyenne Super Wood Grain Bezel - Opinions? While I am still hoping to find a good used bezel, I am doubtful. So I been looking around for repo's because the sticker I used kind of sucks. Most places that have these for sell have horrible pictures and of course I haven't seen one first hand. I got a seller to send me some close up photos. I know the forums are going to reduce the image quality but perhaps they are good enough for opinions and thoughts: pretty good, good enough or rubbish. This is from a seller off eBay but I believe looking at the original photo you can get it from various places. Thanks in advance to you guys that have seen these Cheyenne Super bezels close up :-) Attached Images __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim

08-14-2023, 10:36 PM	#2
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,863	Re: Repo Cheyenne Super Wood Grain Bezel - Opinions? It looks really good to me. I used to have originals rechromed and apply the woodgrain, but those are long gone. I have had good luck with the repos. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

08-14-2023, 10:51 PM	#3
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	Re: Repo Cheyenne Super Wood Grain Bezel - Opinions? Well, that is one vote for it looking good. Thank you for you input! I was thinking the same myself but I really haven't anything to judge that on (since I never seen one up close). Edit: Just read your profile Bio "I'm 70 years old. I bought a 1972 Cheyenne (Orange and white) new and currently own a 1972 Cheyenne Super that I have owned since 1988. I did a frame off in 1989 and won "Best of Show" at Fort Smith, AR in 1990. I've put 30,000 miles on it since." Gee, after reading that - your approval on this repo seems like gospel. __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim

08-14-2023, 11:23 PM	#4
yote1234 Senior Member Join Date: Feb 2003 Location: Gold Canyon Arizona Posts: 4,407	Re: Repo Cheyenne Super Wood Grain Bezel - Opinions? whats your opinion on the GM nos woodgrain bezels that were silver painted not chromed? heres some reading http://67-72chevytrucks.com/vboard/s...d.php?t=666189 __________________ 1971 K5 CST Blazer 1965 Chevelle Malibu 283 (sadly sold) 1968 Camaro 327 1968 Honda mini-trail z50a #377 1966 uh 1-D Huey

08-15-2023, 07:00 AM	#6
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	Re: Repo Cheyenne Super Wood Grain Bezel - Opinions? I went ahead and bought it. @yote1234 Those silver painted ones are odd looking to me! __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim

08-15-2023, 07:08 AM	#7
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 1,845	Re: Repo Cheyenne Super Wood Grain Bezel - Opinions? The silver painted dash bezels look like crap. This was GM just being cheap, and thought it would be "good enough" for a replacement for a even then old truck. They still charged full price for half assed stuff though! __________________ 1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels

08-15-2023, 09:24 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Repo Cheyenne Super Wood Grain Bezel - Opinions? Yeah, the silver I don't consider N.O.S. since they are not what came in the trucks. N.O.R.S. is what they are, just like all the bar coded GM parts folks pass off as N.O.S. They are N.O.T., Not Old Taiwan, same as all repro, but GM has the right to pout their part number on them and put in a Genuine GM box. No bar codes used on packaging in 67-72. They were already in use internally. In fact, GM was one of the first to implement them. Oh, and I agree with Other Larry. For me it was a '72 Highlander off the OK Used Car lot in '73 and at least one ever since __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-18-2023, 10:40 PM	#10
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	Re: Repo Cheyenne Super Wood Grain Bezel - Opinions? I got that reproduction Wood Grain Bezel in today from the eBay seller and just installed. I am not sure if I said this before (because I have had this cluster off a number of times) I really hate that oil line! I swear it takes me more time to get the fitting started than to cycle the whole cluster in and out! Here is a photo, though lighting isn't so good at night in the garage. Attached Images __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim

08-18-2023, 11:22 PM	#11
truckster Registered User Join Date: Jan 2001 Location: Orem, Utah Posts: 7,978	Re: Repo Cheyenne Super Wood Grain Bezel - Opinions? I don't remember where I bought mine. It's been in for three years, and it's peeling just a little bit at one of the corners. My oldest son is really into woodworking, and I've thought about having him make me a really thin veneer out of real wood. __________________ I have sworn upon the altar of God, eternal hostility against every form of tyranny over the mind of man. - Thomas Jefferson

08-19-2023, 10:40 AM	#13
truckster Registered User Join Date: Jan 2001 Location: Orem, Utah Posts: 7,978	Re: Repo Cheyenne Super Wood Grain Bezel - Opinions? It's not too bad. It's mostly next to the headlight switch. Attached Images __________________ I have sworn upon the altar of God, eternal hostility against every form of tyranny over the mind of man. - Thomas Jefferson

08-19-2023, 10:57 AM	#14
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	Re: Repo Cheyenne Super Wood Grain Bezel - Opinions? That looks like heat damage - lots of direct sunlight perhaps? But it isn't to bad, especially that you have had it three years. __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim

08-20-2023, 11:38 AM	#16
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	Re: Repo Cheyenne Super Wood Grain Bezel - Opinions? ah, yes - I agree. I just saw that I did that to my wiper side... __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim

08-20-2023, 06:39 PM	#18
D.B Registered User Join Date: Jul 2021 Location: Keller, Texas Posts: 545	Re: Repo Cheyenne Super Wood Grain Bezel - Opinions? A trick I learned in our shop when we installed decals on our service trucks was to spray over them with clear coat. So, when I installed my gauge bezel decal, I sprayed it with clear coat. That was over ten years ago, and it still looks new.

08-20-2023, 07:47 PM	#19
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,449	Re: Repo Cheyenne Super Wood Grain Bezel - Opinions? Here’s a NOS example fwiw Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

08-20-2023, 07:54 PM	#20
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	Re: Repo Cheyenne Super Wood Grain Bezel - Opinions? nice, did you score that one? lucky dog you! ;-) __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim



Register or Log In To remove these advertisements.

08-20-2023, 08:00 PM	#21
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,449	Re: Repo Cheyenne Super Wood Grain Bezel - Opinions? I did get lucky and landed that. It was not a bargain but does have a chrome surround. I’m adding that to the k20 here soon. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

08-21-2023, 10:02 AM	#22
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	Re: Repo Cheyenne Super Wood Grain Bezel - Opinions? I thought I'd take a photo through the sliding window - came out pretty good with the iPhone's flash. So the bezel is the repo and the glove box wood grain I got off eBay that was from a 72 Cheyenne Super. Door wood grain came with the truck when I bought it :-) Attached Images __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim

Register or Log In To remove these advertisements.