Raise truck or mod A-arms - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ziegelsteinfaust · 09-06-2023, 01:27 PM

I lowered my truck a bit too much, and when I hit a bump while turning my truck rubs.

So I am in a quandary.

If I raise my truck 1". I can get rid of the issue.

If I narrow the track width by taking a 1/2 roughly out of each A arm. I solve the problem too. Preferably the way I want to solve the issue.

Any words of advice on narrowing A arms or is it pretty cut and dry?

SCOTI · 09-06-2023, 03:06 PM

More than one way to get it done but as mentioned pretty cut & dry as far as the task.

09-06-2023, 01:27 PM	#1
Ziegelsteinfaust Registered User Join Date: Dec 2012 Location: Temple City Posts: 3,628	Raise truck or mod A-arms I lowered my truck a bit too much, and when I hit a bump while turning my truck rubs. So I am in a quandary. If I raise my truck 1". I can get rid of the issue. If I narrow the track width by taking a 1/2 roughly out of each A arm. I solve the problem too. Preferably the way I want to solve the issue. Any words of advice on narrowing A arms or is it pretty cut and dry?

09-06-2023, 03:06 PM	#2
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	Re: Raise truck or mod A-arms More than one way to get it done but as mentioned pretty cut & dry as far as the task. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.