AL Set of Captainfab’s Camaro Caliper Brackets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**RoyL** · 12-19-2023, 11:51 PM

Bought the bare metal brackets from Captainfab. New, never installed. These have a couple surface rust spots from sitting in the garage over last winter. I cleaned them up and put some WD-40 on 'em. I’ve stored them inside the house since then.

As the Captain describes: "These brackets fit the '64-'82 Truck 12 bolt and the '79-'87 truck 8.5" 10 bolt differentials. They use the '94-'96 Impala/Caprice rotors and the '93-'97 F-body calipers which have a built-in e-brake."

All hardware and instructions included.

$100 + $12 shipping = $112 total for lower 48

Roy

**RoyL** · 01-20-2024, 09:12 AM

Sold!

12-19-2023, 11:51 PM	#1
RoyL Senior Member Join Date: Aug 2010 Location: HSV, AL Posts: 292	Set of Captainfab’s Camaro Caliper Brackets Bought the bare metal brackets from Captainfab. New, never installed. These have a couple surface rust spots from sitting in the garage over last winter. I cleaned them up and put some WD-40 on 'em. I’ve stored them inside the house since then. As the Captain describes: "These brackets fit the '64-'82 Truck 12 bolt and the '79-'87 truck 8.5" 10 bolt differentials. They use the '94-'96 Impala/Caprice rotors and the '93-'97 F-body calipers which have a built-in e-brake." All hardware and instructions included. $100 + $12 shipping = $112 total for lower 48 Roy __________________ 1965 Suburban Waiting on Time and Money Last edited by RoyL; 12-31-2023 at 11:17 PM.

01-20-2024, 09:12 AM	#2
RoyL Senior Member Join Date: Aug 2010 Location: HSV, AL Posts: 292	Re: Set of Captainfab’s Camaro Caliper Brackets Sold! __________________ 1965 Suburban Waiting on Time and Money



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.