|
07-12-2024, 10:17 PM
|
#1 |
|
Registered User
Join Date: Jun 2022
Location: Battle Creek Mi
Posts: 66
|
Bell housing install?
So I pulled my trans and Bell housing out of my 67 GMC. No I'm in the process putting it back together. I had to fight the Bell housing out of the truck. What's the best way to put this back in?
|
|
|
|
07-13-2024, 11:35 PM
|
#2 |
|
Senior Member
 
Join Date: Jan 2001
Location: Orem, Utah
Posts: 7,976
|
Re: Bell housing install?
I get some long bolts, like 5 inches or so, and cut off the heads (2 bolts needed). Then I cut a slot in them and chamfer the ends. I thread the bolts into the lower threads in the block. Now I have guide pins to help guide the bell housing into place. The slots allow me to use a screwdriver to remove them once the other bolts are in place.
__________________
I have sworn upon the altar of God, eternal hostility against every form of tyranny over the mind of man. - Thomas Jefferson |
|
|
|
 |
| Bookmarks |
| Tags |
| 1/2 ton, 4 speed, 6 cyl |
|
|
Linear Mode
