Can't wait to get to the track! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

djracer · 01-13-2004, 10:15 PM

I got my truck back from getting the rear gears and posi! In the process I had to have screw in studs put in my heads! It is running like a Raped Ape! Now its time to do some suspension work its scary fast now!

krue · 01-13-2004, 10:28 PM

Sounds like fun! Where in the heck is Wetumpka anyways?

djracer · 01-14-2004, 12:14 AM

Krue
It's just outside of Montgomery!

dion · 01-14-2004, 12:24 AM

whoo hoo! put the pedal to the metal!

djracer · 01-14-2004, 12:28 AM

I will definately mash on it. I hope they have test and tune this weekend! I've been working too much and racing too little!

Hooter · 01-14-2004, 12:39 AM

dont blow anything up!

djracer · 01-14-2004, 12:58 AM

if it can't take the pressure I don't need it!!!!!!!!!!!!!!!!

Jace's68 · 01-15-2004, 11:25 AM

Djracer, you're not that far from me. I'm working in Birmingham.

bigjimzlll · 01-15-2004, 11:44 AM

Quote:

Originally posted by djracer
if it can't take the pressure I don't need it!!!!!!!!!!!!!!!!

that just gives me a nice warm fuzzy feeling....not a lot of guys think like us...good luck at the track..post your times

Oborny71 · 01-15-2004, 06:51 PM

what is your drivetrain and motor combo? What times are you hoping to run? i can't wait to take my truck to the track, i've never run it before, so i am excited!

lukecp · 01-15-2004, 06:57 PM

Weren't you running like 14.3's with 3.08 gears?

If you have 3.73 posi now.....i would guess that you are into the 13's (but i have little real-world drag racing experience).

Sounds sweet....post some times!

383 Stroker · 01-15-2004, 07:08 PM

Have fun! Let us know what it runs.

djracer · 01-15-2004, 08:49 PM

Jace's 68 What kind of work do you do and how long are you in b'ham? I'm about 100 miles south!

Bigjimz I love these folks that have 9 second cars but never been to the track! I test everything I own! I couldn't get my 307 to run in my 71 for super chevy so I ran my 03 duramax/allison crewcab 3/4 ton 4X4. I freaked some folks out when I went 9.78 in the eighth with that beast and its stock except for a predator programmer!

Oborny71 I ran a 9.12 eighth mile and 14.31 quarter with a homemade zz4 motor with vortec heads a small stall convertor turbo 350 and 307 rear gears with cheater slicks! I tried the skinny radials but it spun all the way down the race track literally!

Yellow 72 custom That's right I hope the gears pick it up allot. We also found a couple other small problems that have been corrected so I can't wait! My best local track is closed this weekend but I may try to find somewhere to run it! I can tell a major differance in the seat of pants feel! Now I got to work on the suspension but the stuff I want at a deal is about 900.00 bucks (ouch)!

tomsC10R · 01-15-2004, 11:38 PM

Quote:

Originally posted by djracer
I will definately mash on it. I hope they have test and tune this weekend! I've been working too much and racing too little!

It's January, my truck is barried deep inside a shed in many, many parts.

Good luck! Post some times and pics if you can

djracer · 01-16-2004, 12:16 AM

Will do Tom. Its not much to look at yet but I can make it pretty later. Its the one in my avatar. I have a couple pics that I need to scan from the last time I raced it.

01-13-2004, 10:15 PM	#1
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Can't wait to get to the track! I got my truck back from getting the rear gears and posi! In the process I had to have screw in studs put in my heads! It is running like a Raped Ape! Now its time to do some suspension work its scary fast now! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! Last edited by djracer; 01-14-2004 at 12:12 AM.

01-13-2004, 10:28 PM	#2
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Sounds like fun! Where in the heck is Wetumpka anyways? __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

01-14-2004, 12:14 AM	#3
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Krue It's just outside of Montgomery! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

01-14-2004, 12:24 AM	#4
dion 72 Cheyenne Join Date: Oct 2001 Location: San Diego Posts: 2,086	whoo hoo! put the pedal to the metal! __________________ Burnout Idle 1972Cheyenne 1966/67Stouts

01-14-2004, 12:28 AM	#5
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	I will definately mash on it. I hope they have test and tune this weekend! I've been working too much and racing too little! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

01-14-2004, 12:39 AM	#6
Hooter My other Love Join Date: Aug 2001 Location: Castlegar B.C. Canada Posts: 4,085	dont blow anything up! __________________ Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com First generation Monte Carlo club pictures of my life

01-14-2004, 12:58 AM	#7
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	if it can't take the pressure I don't need it!!!!!!!!!!!!!!!! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

01-15-2004, 11:25 AM	#8
Jace's68 Registered User Join Date: Sep 2002 Location: Kentucky Posts: 107	Djracer, you're not that far from me. I'm working in Birmingham.

01-15-2004, 06:51 PM	#10
Oborny71 Registered User Join Date: Apr 2001 Location: Lincoln, Nebraska Posts: 587	what is your drivetrain and motor combo? What times are you hoping to run? i can't wait to take my truck to the track, i've never run it before, so i am excited! __________________ 67 Chevy SWB - goal of a 1,000 hp weekend cruiser

01-15-2004, 06:57 PM	#11
lukecp Formerly yellow72custom Join Date: May 2001 Location: Austin, TX Posts: 7,531	Weren't you running like 14.3's with 3.08 gears? If you have 3.73 posi now.....i would guess that you are into the 13's (but i have little real-world drag racing experience). Sounds sweet....post some times! __________________ '72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg

01-15-2004, 07:08 PM	#12
383 Stroker Registered User Join Date: Aug 2001 Location: Jesup, GA Posts: 571	Have fun! Let us know what it runs. __________________ Video's of my Truck Racing 1967 C-10, 383ci Sbc, TH350, 3200 stall, 3.73 gear

01-15-2004, 08:49 PM	#13
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Jace's 68 What kind of work do you do and how long are you in b'ham? I'm about 100 miles south! Bigjimz I love these folks that have 9 second cars but never been to the track! I test everything I own! I couldn't get my 307 to run in my 71 for super chevy so I ran my 03 duramax/allison crewcab 3/4 ton 4X4. I freaked some folks out when I went 9.78 in the eighth with that beast and its stock except for a predator programmer! Oborny71 I ran a 9.12 eighth mile and 14.31 quarter with a homemade zz4 motor with vortec heads a small stall convertor turbo 350 and 307 rear gears with cheater slicks! I tried the skinny radials but it spun all the way down the race track literally! Yellow 72 custom That's right I hope the gears pick it up allot. We also found a couple other small problems that have been corrected so I can't wait! My best local track is closed this weekend but I may try to find somewhere to run it! I can tell a major differance in the seat of pants feel! Now I got to work on the suspension but the stuff I want at a deal is about 900.00 bucks (ouch)! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

01-16-2004, 12:16 AM	#15
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Will do Tom. Its not much to look at yet but I can make it pretty later. Its the one in my avatar. I have a couple pics that I need to scan from the last time I raced it. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.