PA Coming Soon - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jaros44sr** · 09-21-2024, 10:11 AM

Cruise control……

@this great forum Value tbd

67kid · 09-21-2024, 12:04 PM

Interested if factory and year?

**jerry moss** · 09-21-2024, 01:32 PM

factory cruise has to be one of the rarest options out there. of the 200 or so trucks i've parted out over the years i only had two with factory installed cruise control-one was a 72 cheyenne super and the other was a 68 gmc suburban.

best view · 09-21-2024, 03:39 PM

Coming soon , that was brilliant I am still laughing

**jaros44sr** · 09-22-2024, 06:52 AM

Maybe I should have added more to the title

**jaros44sr** · 09-22-2024, 06:54 AM

Quote:

Originally Posted by jerry moss

factory cruise has to be one of the rarest options out there. of the 200 or so trucks i've parted out over the years i only had two with factory installed cruise control-one was a 72 cheyenne super and the other was a 68 gmc suburban.

Was this on the spid

**jaros44sr** · 09-22-2024, 06:55 AM

Quote:

Originally Posted by 67kid

Interested if factory and year?

Unknown Questionable

**jerry moss** · 09-22-2024, 09:08 AM

Quote:

Originally Posted by jaros44sr

Was this on the spid

yes it was, that's why i stated only 2 of the many trucks that i parted were factory equipped. there were a couple of others with cruise but they didn't have documentation .

old51sedan · 09-22-2024, 10:29 AM

Quote:

Originally Posted by jerry moss

yes it was, that's why i stated only 2 of the many trucks that i parted were factory equipped. there were a couple of others with cruise but they didn't have documentation .

I know I'm talking different years here, but in 1976 I ordered a short box 4x4 fleetside with a lot of small items like tilt, cruise, dual exhaust, clock, and etc. I looked that truck up this summer with thoughts of restoring it, found it, but it was sitting in a field. The drivers door, hood, engine, etc were gone along with the steering column, this still belongs to the guy I sold it to. I kept asking if it had the column, but he wasn't to interested to looking, still would like to have it back if he could find the column. Were they that rare in 76, I tried to order PW, but was told they were N/A. It was a pretty truck, blue on blue with cloth buckets, he didn't know where they were either, he had buildings full of stuff, don't think he ever sold anything.

**jaros44sr** · 09-23-2024, 09:26 AM

Quote:

Originally Posted by jerry moss

yes it was, that's why i stated only 2 of the many trucks that i parted were factory equipped. there were a couple of others with cruise but they didn't have documentation .

Thanks Jerry for the information

**Classic Bowties** · 09-23-2024, 09:42 AM

Quote:

Originally Posted by jaros44sr

Maybe I should have added more to the title

Or to the f/s thread... How does one commit or get in line without knowing year/style? Complete setup? Pictures? Price?

**jaros44sr** · 09-25-2024, 10:06 AM

Quote:

Originally Posted by Classic Bowties

Or to the f/s thread... How does one commit or get in line without knowing year/style? Complete setup? Pictures? Price?

All valid points,but price is what is holding me up

If I post a picture then I have to add a price

Here’s a thought have a Mod move to WIW

**jaros44sr** · 09-27-2024, 09:50 AM

AIWI cruise control shipping and fees xtra

1000.00 US

image by [url=https://www.flickr.com/photos/97391199@N06

**jaros44sr** · 09-27-2024, 09:54 AM

image by [url=https://www.flickr.com/photos/97391199@N06

**72BBChuck** · 09-28-2024, 12:15 PM

Cool stuff for sure. All parts there are familiar to me, however, the carb end of the servo cable is different from the ones I have seen as well as the bracket. Can you get an overall measurement of the servo cable? Trucks were about 45 inches and the passenger cars were about 24 inches.

**72BBChuck** · 09-29-2024, 11:50 AM

Quote:

Originally Posted by jerry moss

factory cruise has to be one of the rarest options out there. of the 200 or so trucks i've parted out over the years i only had two with factory installed cruise control-one was a 72 cheyenne super and the other was a 68 gmc suburban.

Jerry, The 72 Cheyenne Super you parted out with cruise control, was it on the SPID? I am curious as it is generally believed that cruise was only offered as a dealer installed option in 71-72 so it would not have appeared on a SPID. However, i was told that someone posted a 71 SPID with cruise, thus , my question. I have a 72 Cheyenne Super with cruise. It is all installed per the dealer installation instructions so I am pretty sure a dealer installed it.

**jerry moss** · 09-29-2024, 12:23 PM

Quote:

Originally Posted by 72BBChuck

Jerry, The 72 Cheyenne Super you parted out with cruise control, was it on the SPID? I am curious as it is generally believed that cruise was only offered as a dealer installed option in 71-72 so it would not have appeared on a SPID. However, i was told that someone posted a 71 SPID with cruise, thus , my question. I have a 72 Cheyenne Super with cruise. It is all installed per the dealer installation instructions so I am pretty sure a dealer installed it.

I parted these trucks over 20 years ago and the glove box doors are long gone. you might be correct-my memory aint what it used to be. a buddy of mine still has both set ups, the 68 was in the turn signal handle and the 72 was a button on the dash that said "cruise master". i'm sure he still has the 68 gb door since he didn't believe it was available in 68 and he is actually the one that removed it from the truck but i'll ask him if he has the 72 door.

**jaros44sr** · 09-30-2024, 11:35 AM

Quote:

Originally Posted by 72BBChuck

Cool stuff for sure. All parts there are familiar to me, however, the carb end of the servo cable is different from the ones I have seen as well as the bracket. Can you get an overall measurement of the servo cable? Trucks were about 45 inches and the passenger cars were about 24 inches.

Specific stud on carb with keeper, I should have that part laying around

20190524_070721 by [url=https://www.flickr.com/photos/97391199@N06

**72BBChuck** · 10-04-2024, 12:41 AM

Could we get a measurement of the servo cable? Thanks, Chuck

**jaros44sr** · 10-04-2024, 05:25 AM

Quote:

Originally Posted by 72BBChuck

Could we get a measurement of the servo cable? Thanks, Chuck

Sure, leaving town soon MIL has her 100th birthday, so I will do it soon

**jaros44sr** · 10-04-2024, 06:52 AM

Looks like about 48”

**72BBChuck** · 11-23-2024, 11:48 PM

Jim, Would you consider a part cash part trade offer? I try to keep some good trading stock. Thanks, Chuck

**jaros44sr** · 11-25-2024, 05:59 PM

Quote:

Originally Posted by 72BBChuck

Jim, Would you consider a part cash part trade offer? I try to keep some good trading stock. Thanks, Chuck

Chuck, sent you a pm

**jaros44sr** · 12-04-2024, 09:16 AM

Reduced price to 900.00

09-21-2024, 10:11 AM	#1
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,759	Coming Soon Cruise control…… @this great forum Value tbd __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 09-22-2024 at 06:51 AM.

09-21-2024, 12:04 PM	#2
67kid Registered User Join Date: Sep 2015 Location: Mesa,Az. Posts: 534	Re: Coming Soon Interested if factory and year?

09-21-2024, 01:32 PM	#3
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,935	Re: Coming Soon factory cruise has to be one of the rarest options out there. of the 200 or so trucks i've parted out over the years i only had two with factory installed cruise control-one was a 72 cheyenne super and the other was a 68 gmc suburban. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

09-21-2024, 03:39 PM	#4
best view Registered User Join Date: Apr 2009 Location: newbury new hampsire Posts: 2,150	Re: Coming Soon Coming soon , that was brilliant I am still laughing

09-22-2024, 06:52 AM	#5
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,759	Re: Coming Soon Maybe I should have added more to the title __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

09-27-2024, 09:50 AM	#13
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,759	Re: Coming Soon AIWI cruise control shipping and fees xtra 1000.00 US image by [url=https://www.flickr.com/photos/97391199@N06 __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

09-27-2024, 09:54 AM	#14
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,759	Re: Coming Soon image by [url=https://www.flickr.com/photos/97391199@N06 __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

09-28-2024, 12:15 PM	#15
72BBChuck Senior Member Join Date: Jun 2007 Location: SW Washington State Posts: 216	Re: Coming Soon Cool stuff for sure. All parts there are familiar to me, however, the carb end of the servo cable is different from the ones I have seen as well as the bracket. Can you get an overall measurement of the servo cable? Trucks were about 45 inches and the passenger cars were about 24 inches.

10-04-2024, 12:41 AM	#19
72BBChuck Senior Member Join Date: Jun 2007 Location: SW Washington State Posts: 216	Re: Coming Soon Could we get a measurement of the servo cable? Thanks, Chuck

10-04-2024, 06:52 AM	#21
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,759	Re: Coming Soon Looks like about 48” __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

11-23-2024, 11:48 PM	#22
72BBChuck Senior Member Join Date: Jun 2007 Location: SW Washington State Posts: 216	Re: Coming Soon Jim, Would you consider a part cash part trade offer? I try to keep some good trading stock. Thanks, Chuck

12-04-2024, 09:16 AM	#24
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,759	Re: Coming Soon Reduced price to 900.00 __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.