1972 Rust Free California K5 4X4 CST Blazer

[LeftCoast32]

It is almost finished and includes everything listed below. I want to try and sell it as as whole Blazer and not part it out. It has been inside an enclosed storage in southern California for almost 2 years. I just dont have the time to finish it. It runs and drives right now and I have all receipts and pictures (photo album) of the complete frame off restoration. The body and all sheet metal have been media blasted and straightened, it is ready to paint and assemble. I have most all stainless bolts to assemble the rest of the Blazer. I have everything needed to finish except the carpet and sill plates. It has a 425 hp 1970 LT1 engine, TH350, NP205, Dana 44, 12 Bolt and all new suspension etc. Please see the below list of almost everything I have, I know I am forgetting things.


1972 BLAZER PARTS

SHEETMETAL
A/C BODY TUB (ALL BODY WORK DONE) W/CLEAR TITLE)
FRONT FENDERS X2 (NEW)
FRONT FENDERS X2 (ORIGINAL)
HOOD (ORIGINAL)
CORE SUPPORT (NEW)
DOORS X2 (PICKUP DOORS CUT DOWN)
TAILGATE (ORIGINAL)
FRONT BUMPER (NEW)
REAR BUMPER (NEW)
DOUBLE WALL TOP (UNRESTORED)
REAR HATCH ORIGINAL UNBROKEN (W/HARDWARE EXCEPT HANDLE)

EXTERIOR
TAILGATE PANEL (CHEVROLET W/WOODGRAIN) (NEW)
TAILGATE MOLDINGS UPPER (NEW)
FRONT GRILL COMPLETE (NEW)
EXTERIOR DOOR HANDLES (NEW)
EXTERIOR MIRRORS (NEW)
LOCK SET COMPLETE (NEW)
K5 BLAZER EMBLEMS (NEW)
350 EMBLEMS (NEW)
ALL GLASS EXCEPT WINDSHIELD (TINTED)

INTERIOR
VISORS X2 W/MOUNTS (NEW)
DASH PAD (BLACK) (NEW)
TACH DASH CLUSTER REBUILT WITH 0 MILES
DOOR PANELS (BLACK) (NEW)
REAR INTERIOR PANELS W/CHROME MOLDINGS (BLACK) (NEW)
BUCKET SEATS (UNRESTORED)
BLACK HOUNDS TOOTH BUCKET SEAT COVERS (NEW)
BLACK BUCKET SEAT BACKS (NEW)
BUCKET SEAT FRAMES (RESTORED)
REAR SEAT (UNRESTORED) BLACK W/BRACKETS
STEERING COLUMN AUTOMATIC NON TILT (RESTORED)
STEERING WHEEL CORVETTE W/ADAPTER TO COLUMN
GUAGE CLUSTER W/TACH (RESTORED)
CHROME ASH TRAY (NEW)
CHROME AND BLACK GLOVE BOX DOOR (RESTORED)
GLOVE BOX LINER
STOCK AM RADIO (WORKS)
COMPLETE ORIGINAL RESTORED A/C SYSTEM
COMPLETE WIRING HARNESSES (NEW)
INTERIOR DOOR HANDLES (NEW)
INTERIOR WINDOW CRANK HANDLES (NEW)
DOOR WEATHERSTRIP COMPLETE X2 (NEW)
DRIP RAIL DEFLECTORS (NEW)
DOOR TOP CAPS (RESTORED)
VENT WINDOWS (NEW) X2
VENT WINDOWS (USED) X2

SUSPENSION
1972 4X4 FRAME PERFECT SHAPE
4” FRONT ROUGH COUNTRY SPRINGS
6”REAR ROUGH COUNTRY SPRINGS
ROUGH COUNTRY SHOCKS W/BLACK BOOTS (NEW)
COMPLETE U-BOLT SET FOR SPRINGS
COMPLETE ZINC BOLTS FOR SUSPENSION
SUSPENSION POLY BUSHINGS COMPLETE
BODY POLY BUSHINGS COMPLETE
RAISED STEERING ARM
DRAG LINK NEW
FRONT BRAIDED STAINLESS STEEL BRAKE LINES (6”)
REAR BRAIDED STAINLESS STEEL BRAKE LINES (6”)

LIGHTING
SIDE MARKERS FRONT AND REAR (NEW)
REAR LIGHTS (RESTORED) W/BUCKETS
FRONT MARKERS (RESTORED) W/BUCKETS
HEADLIGHTS W/BUCKETS
INTERIOR UNDERDASH LIGHTING
GLOVE BOX LIGHTING

WHEELS AND TIRES
15X8 6 LUG RALLEY WHEELS (W/CENTER CAPS AND BEAUTY RINGS)
35X12.5 BFG MUD TERRAIN 95% TREAD

DRIVE TRAIN
4 CORE RADIATOR REBUILT
1970 LT1 BLOCK
1970 LT1 FORGED CRANK
1970 LT1 FORGED RODS
TRW FORGED PISTONS .030
MILODON OIL PAN
1970 LT1 CAMEL BACK HEADS, 2.02/1.60 3 ANGLE VALVE JOB, PORTED & POLISHED
HOLLEY ALUMINUM HEADS (SYSTEMAX 425/425)
LUNATI CAM
LUNATI TIMING GEARS
HOLLEY DOMINATOR INTAKE
3310 HOLLEY CARB 750 CFM
MALLORY UNILIGHT DISTRIBUTOR
ALUMINUM WATER PUMP
TH350
NP205
ADAPTER PLATE
DRIVE SHAFT FRONT (CV) CUSTOM
DRIVE SHAFT REAR CUSTOM
DANA 44 DISC BRAKE FRONT (6LUG, 3.08, NEWER BRAKES)
CORPORATE 12 BOLT REAR (6 LUG, 3.08, NEWER BRAKES)
AGR STEERING BOX (VARIABLE RATIO)

[LeftCoast32]

engine 2

[LeftCoast32]

engine 3

[LeftCoast32]

A/C system

[LeftCoast32]

Garage picture

[LeftCoast32]

dash 5

[LeftCoast32]

dash 6

[LeftCoast32]

dash 7

[LeftCoast32]

I would like to see a price somewhere near what I have in receipts alone. The receipts dont account for any of my time which is in excess of at least 300 hours. No expense has been spared in the restoration of this California Blazer. You will not believe the detail in this restoration, the pictures do no justice! I have a friend that has a transport company, he can deliver for very resonable prices. I just had a 1969 C10 short wide shipped from Lubbock, Texas to San Diego for $495.00, which is over 1000 miles.

Feel free to call or e-mail me any time.

Joseph DeLano
(760)522-8669
aloysius66@hotmail.com

[imdarren]

All I can say is WOW!!
I can tell you are a perfectionist.
You have done a great job!
I wish it was in a price range I could afford
But If you want anywhere close to what you have in receipts, I can tell you have big bucks into that.
Good luck. I hope it goes to a good / deserving home.

Darren

[Alexis]

I know this sounds crazy.........but if you ever, if it even slip your mind, just a tad....to part it out. Put me on the list as number 1 for the tub. i know it crazy talk but just incase......never know.

Hope it find a good home.

[ChevyDude]

Is it not true that if you are going to try to sell something on this board that you MUST post a price??? What are you asking for your very nice project?

[LeftCoast32]

In my sig I have it listed for "offer", what I would like to get is $15,000.00 for everything I have. Someone could buy it and part it out and make money on it. It is a condtion that I would hate to see it parted out at this point, I searched for a perfect California body for so long, then I put the money into it to make it perfect. I have owned this Blazer since 1999.

[LeftCoast32]

I would also consider selling everything minus the engine for $13,000. I have a considerable interest in the engine and a few other projects that it would work great in. Thanks for all the great comments. Please feel free to call me and I can go indepth on everything that has been done to date.

Joseph DeLano
(760)522-8669

[nu2-72]

WOW! So close (to being finished) yet so far (away from me).
Outstanding project. Please tell the new owner of the board if they are not a member. I want to see the finished pics.

[Blue Beard]

alot of nice work there...........have you thought about ebay....?

[1970blazin]

That is one BEAUTIFUL K5!!! Good Luck to you and hope to see it finished some day! Don't part it out! It is a pain, and would be a shame.

[LeftCoast32]

Thanks so very much for the complements. It is so nice to hear praise to the hard work you have performed.

[Smokin72on20s]

dont sell it, its too sweet!

[clbmcgov56]

Do you still have the rear hatch, i'm in need...tell me you have it. Rob

[First c10]

From 15 years ago??? I doubt it!!!

[72ironmike]

Originally Posted by First c10

From 15 years ago??? I doubt it!!!

He hasn't been on the board for 5 years !