47-55.1 rear fender repair panels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

boardog · 01-02-2025, 10:26 PM

does anyone know if they reproduce rear fender patches or a repair panel for a 51 stepside? they make one for the front fenders.

**mr48chev** · 01-02-2025, 11:07 PM

You can get the bottom six inches of the front of the rear fenders here shown on the Filling Station's page but others should have them.

I haven't found any rear of the fender patch pieces.

R&B51 · 01-04-2025, 02:16 AM

I couldn’t find any either. Ended up just buying some new replacement fenders. Started realizing that time and gravel impact and a little bit of rust had worn the sheet metal pretty thin quite a ways up in the fender anyway. Would’ve been difficult to get far enough to get decent thickness, sheet metal and most patch panels might not go that far. That was true for my old fenders.

GreasyLikeaBurger · Yesterday, 02:50 PM

Classic Parts has them also, just the lead edge of the rear fenders. I ordered a set last year, havent gotten around to fitting them up yet.

https://classicparts.com/1947-54-rea...nt-lower-right

01-02-2025, 10:26 PM	#1
boardog Registered User Join Date: Oct 2015 Location: cleveland ga Posts: 30	rear fender repair panels does anyone know if they reproduce rear fender patches or a repair panel for a 51 stepside? they make one for the front fenders.

01-02-2025, 11:07 PM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,725	Re: rear fender repair panels You can get the bottom six inches of the front of the rear fenders here shown on the Filling Station's page but others should have them. I haven't found any rear of the fender patch pieces. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

01-04-2025, 02:16 AM	#3
R&B51 Registered User Join Date: Nov 2015 Location: Jenks, OK Posts: 238	Re: rear fender repair panels I couldn’t find any either. Ended up just buying some new replacement fenders. Started realizing that time and gravel impact and a little bit of rust had worn the sheet metal pretty thin quite a ways up in the fender anyway. Would’ve been difficult to get far enough to get decent thickness, sheet metal and most patch panels might not go that far. That was true for my old fenders.

Yesterday, 02:50 PM	#4
GreasyLikeaBurger Registered User Join Date: Oct 2015 Location: Costa Mesa, CA Posts: 191	Re: rear fender repair panels Classic Parts has them also, just the lead edge of the rear fenders. I ordered a set last year, havent gotten around to fitting them up yet. https://classicparts.com/1947-54-rea...nt-lower-right



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.