WTB: Swaybar? S Plenum? Bumper Guards? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

anthony_1269 · 01-15-2004, 07:10 PM

I have a 71 Fleetside PU, dosen't have a swaybar so was wondering if anyone has an extra one laying around I can buy. Also looking to see if anyone has a extra S-plenum for my A/C, mines shot, and also a pair of bumper guards... zip code is 78666. Thanks!!!

teeitup · 01-15-2004, 07:23 PM

I got a sway bar with new bushing for $50 plus shipping. Thanks Randy

anthony_1269 · 01-15-2004, 07:29 PM

teeitup,

Can you tell what the thickness of the swaybar. Thanks

Joe

teeitup · 01-15-2004, 07:37 PM

Its the smaller one off 1/2 ton not a 3/4 ton

fast71 · 01-15-2004, 07:50 PM

Goodmark is repopping the bumper guards . They should be out in the middle of Feb. around a 100.00 for a set of chrome ones

anthony_1269 · 01-15-2004, 08:26 PM

Was wondering if someone could tell me if the chrome ones from the ealier years (67-69 all chrome) would also fit the years 70-71 bumpers with parking lights? There wouldn't be a problem w/clearance or anything would there? Thanks!

Joe

*72longbed* · 01-15-2004, 08:57 PM

Hey Joe,

I have a factory front sway bar off my 72 C-20. It's the large diameter bar. I'll sell it for $45.00 plus shipping. You can still get bushings for it at any auto parts store for really cheap.

Let me know.

72longbed

anthony_1269 · 01-15-2004, 09:07 PM

Hey 72longbed,

If I buy the bushings from an auto parts store, does it come with brackets also, or do I have to provide those myself? Thanks!

Joe

*72longbed* · 01-15-2004, 09:26 PM

Joe,
Beleive it or not, those are STILL available from GM!!

OR you can get them from any bone yard, up to 98 are all the same I think, or any of the aftermarket parts suppliers such as ECE, LMC, Brothers, etc., etc.. Very available.

72

68 Suburban · 01-15-2004, 09:34 PM

I have one off a C-20 that has been powder coated. Included what is shown. $65 plus shipping from Arizona.

**PICKMUP** · 01-15-2004, 10:27 PM

Just for information: I think all of our C10/20/30 sway bars are the same 1 &1/16". You have to go to later models to get the big 1&1/4" bars...and all of them are not the big ones, either. Be sure and measure.
You know how to measure, don't you? "Measure three times and cut once"...or if it's like me: " I cut it too short, so I went ahead and cut it again, and it was still too short? I think that was supposed to be a little carpenter humor.

68 Suburban · 01-15-2004, 10:37 PM

Mine is 1 1/16th

Solver · 01-15-2004, 11:28 PM

I thought that for our years the 1/2 tons had a 1 1/16" sway bar and the 3/4 tons had a 1 1/8" sway bar?

68 Suburban · 01-15-2004, 11:29 PM

Maybe mine is the 1 1/8th...lol. All I know, it is not the 1 1/4

72skytop · 01-16-2004, 12:03 AM

Excuse me, I don't mean to interupt the thread, but...

Someone showed me a really cool way to measure a bar:

Use an open end wrench and when the wrench you pick fits the bar snug, then that is the diameter.

Sounds really simple. Wish I would have though of that...

Good luck in the search for your front bar.

teeitup · 01-16-2004, 12:54 AM

Thanks Frank for saying that, I've parted out alot of these trucks 1/2 and 3/4 and never found one a different size. I've never said anything because of everyone saying 3/4 was bigger. I'm glad you brought this to everyones attention. Mines got new bushings and brackets for $50 plus shipping. Thanks Randy

**PICKMUP** · 01-16-2004, 01:13 AM

Well as long as I am on a roll: The Goodmark guards will be the short 67-8 style. They look good on any shortwide or lowered 1/2T (IMHO).
The 69-72s had the longer guards with the rubber in the front. A pretty good repro has been available for years. I think they look really good on a 71-2 GMC with the black grill...don't you?
...and here comes the pic

Wow, look at all that junk in the background. I need to clean house!

Castiron9 · 01-16-2004, 01:23 AM

Yea.Frank...............Big Yard """"SALE"""""""""""By the way is that an old picture it sure is a sunny day

anthony_1269 · 01-16-2004, 11:23 AM

Yeah, I like the ones w/the rubber on them, but I do also like the all chrome ones. I just don't know if the all chrome ones will fit or look good with my bumper, the bumper w/the parking lights...

Joe

01-15-2004, 07:10 PM	#1
anthony_1269 Registered User Join Date: Sep 2002 Location: Texas Posts: 110	WTB: Swaybar? S Plenum? Bumper Guards? I have a 71 Fleetside PU, dosen't have a swaybar so was wondering if anyone has an extra one laying around I can buy. Also looking to see if anyone has a extra S-plenum for my A/C, mines shot, and also a pair of bumper guards... zip code is 78666. Thanks!!! __________________ 1971 Chevy Longbed Fleetside Chevrolet All The Way!

01-15-2004, 07:23 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	I got a sway bar with new bushing for $50 plus shipping. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-15-2004, 07:29 PM	#3
anthony_1269 Registered User Join Date: Sep 2002 Location: Texas Posts: 110	teeitup, Can you tell what the thickness of the swaybar. Thanks Joe __________________ 1971 Chevy Longbed Fleetside Chevrolet All The Way!

01-15-2004, 07:37 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Its the smaller one off 1/2 ton not a 3/4 ton __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-15-2004, 07:50 PM	#5
fast71 Drive it like U stole it Join Date: Mar 2000 Location: tunnel hill ,GA /Chatt,TN Posts: 956	Goodmark is repopping the bumper guards . They should be out in the middle of Feb. around a 100.00 for a set of chrome ones __________________ 71 custom 10 swb 72 nova ss 72 nova custom 87 s10 96 burb 94 camry 53 5 window 3100

01-15-2004, 08:26 PM	#6
anthony_1269 Registered User Join Date: Sep 2002 Location: Texas Posts: 110	Bumper Guards? Was wondering if someone could tell me if the chrome ones from the ealier years (67-69 all chrome) would also fit the years 70-71 bumpers with parking lights? There wouldn't be a problem w/clearance or anything would there? Thanks! Joe __________________ 1971 Chevy Longbed Fleetside Chevrolet All The Way!

01-15-2004, 08:57 PM	#7
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	C-20 Sway Bar Hey Joe, I have a factory front sway bar off my 72 C-20. It's the large diameter bar. I'll sell it for $45.00 plus shipping. You can still get bushings for it at any auto parts store for really cheap. Let me know. 72longbed

01-15-2004, 09:07 PM	#8
anthony_1269 Registered User Join Date: Sep 2002 Location: Texas Posts: 110	72longbed Hey 72longbed, If I buy the bushings from an auto parts store, does it come with brackets also, or do I have to provide those myself? Thanks! Joe __________________ 1971 Chevy Longbed Fleetside Chevrolet All The Way!

01-15-2004, 09:26 PM	#9
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Brackets Joe, Beleive it or not, those are STILL available from GM!! OR you can get them from any bone yard, up to 98 are all the same I think, or any of the aftermarket parts suppliers such as ECE, LMC, Brothers, etc., etc.. Very available. 72

01-15-2004, 09:34 PM	#10
68 Suburban Registered User Join Date: Oct 2000 Location: From Chicago, Live in Phoenix, AZ Posts: 6,802	I have one off a C-20 that has been powder coated. Included what is shown. $65 plus shipping from Arizona.

01-15-2004, 10:27 PM	#11
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,125	Just for information: I think all of our C10/20/30 sway bars are the same 1 &1/16". You have to go to later models to get the big 1&1/4" bars...and all of them are not the big ones, either. Be sure and measure. You know how to measure, don't you? "Measure three times and cut once"...or if it's like me: " I cut it too short, so I went ahead and cut it again, and it was still too short? I think that was supposed to be a little carpenter humor. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

01-15-2004, 10:37 PM	#12
68 Suburban Registered User Join Date: Oct 2000 Location: From Chicago, Live in Phoenix, AZ Posts: 6,802	Mine is 1 1/16th

01-15-2004, 11:28 PM	#13
Solver Registered User Join Date: May 2000 Location: Storm Lake, Ia Posts: 1,449	I thought that for our years the 1/2 tons had a 1 1/16" sway bar and the 3/4 tons had a 1 1/8" sway bar? __________________ 1972 Cheyenne Super 20 LWB-Blue 1972 Cheyenne Super 10 LWB-Black 1972 Cheyenne Super 10 LWB-Red 1972 Cheyenne Super 10 LWB-green 1972 GMC 4x4 LWB-White 1971 Cheyenne 10 LWB-Ochre 1971 Cheyenne 20 Longhorn-Copper 1971 Cheyenne 20 Longhorn-Black 1969 Custom 10 LWB-lt blue 1968 GMC 3/4 ton-green 1968 1/2 ton swb stepside-silver 1967 Chevrolet CST 10 LWB-green 1967 Chevrolet custom 20 LWB-Maroon

01-15-2004, 11:29 PM	#14
68 Suburban Registered User Join Date: Oct 2000 Location: From Chicago, Live in Phoenix, AZ Posts: 6,802	Maybe mine is the 1 1/8th...lol. All I know, it is not the 1 1/4

01-16-2004, 12:03 AM	#15
72skytop Registered User Join Date: May 2003 Location: Evansville, IN Posts: 147	Excuse me, I don't mean to interupt the thread, but... Someone showed me a really cool way to measure a bar: Use an open end wrench and when the wrench you pick fits the bar snug, then that is the diameter. Sounds really simple. Wish I would have though of that... Good luck in the search for your front bar. __________________ Kevin Korff Evansville, IN 47711 1997 Silverado 3500 LWB Vortec 454, headers 4.11 posi. Victory Red WOW! 1976 Oldsmobile 98 Regency four door 42,000 miles original paint. This is still a car! 1990 Oldsmobile 98 Touring Sedan 34,000 miles 1983 Hurst/Olds 30,000 actual miles 2013 Ford Taurus SHO 1972 Hurst/Olds-a work with no progress 1972 Oldsmobile 442 Convertible 455



Register or Log In To remove these advertisements.

01-16-2004, 12:54 AM	#16
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Thanks Frank for saying that, I've parted out alot of these trucks 1/2 and 3/4 and never found one a different size. I've never said anything because of everyone saying 3/4 was bigger. I'm glad you brought this to everyones attention. Mines got new bushings and brackets for $50 plus shipping. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-16-2004, 01:13 AM	#17
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,125	Well as long as I am on a roll: The Goodmark guards will be the short 67-8 style. They look good on any shortwide or lowered 1/2T (IMHO). The 69-72s had the longer guards with the rubber in the front. A pretty good repro has been available for years. I think they look really good on a 71-2 GMC with the black grill...don't you? ...and here comes the pic Wow, look at all that junk in the background. I need to clean house! Attached Images __________________ Email: frankeham@comcast.net Phone: 360-956-7170 Last edited by PICKMUP; 01-16-2004 at 01:16 AM.

01-16-2004, 01:23 AM	#18
Castiron9 72 LONGHORN OWNER Join Date: Sep 2002 Location: Seattle Wash. Posts: 963	Yea.Frank...............Big Yard """"SALE"""""""""""By the way is that an old picture it sure is a sunny day __________________ 72-SUPER CHEYENNE/20 LONGHORN 70-C/30 DUALLY

01-16-2004, 11:23 AM	#19
anthony_1269 Registered User Join Date: Sep 2002 Location: Texas Posts: 110	Yeah, I like the ones w/the rubber on them, but I do also like the all chrome ones. I just don't know if the all chrome ones will fit or look good with my bumper, the bumper w/the parking lights... Joe __________________ 1971 Chevy Longbed Fleetside Chevrolet All The Way!

Register or Log In To remove these advertisements.