So there are two different pedal setups for these trucks? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jumpsoffrock · 04-17-2025, 07:24 PM

Both of these are from 1972 trucks, the one with the giant clutch spring is a 402/4spd.
The other setup is from a 292 truck.

**'68OrangeSunshine** · 04-17-2025, 08:19 PM

I have a '68 C/10 with a 292 and SM465, and a '71 GMC Jimmy K/1500 with a 350/SM465/NP205.
I am guessing the HD spring is for K/- Trucks.
I have one of each of your examples in the rigs I am running.

And to elaborate on your question, Automatic Transmission models would not have any Clutch Pedal, so that's a third type.

04-17-2025, 07:24 PM	#1
jumpsoffrock Registered User Join Date: Apr 2014 Location: California Posts: 1,126	So there are two different pedal setups for these trucks? Both of these are from 1972 trucks, the one with the giant clutch spring is a 402/4spd. The other setup is from a 292 truck. Attached Images

04-17-2025, 08:19 PM	#2
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 8,118	Re: So there are two different pedal setups for these trucks? I have a '68 C/10 with a 292 and SM465, and a '71 GMC Jimmy K/1500 with a 350/SM465/NP205. I am guessing the HD spring is for K/- Trucks. I have one of each of your examples in the rigs I am running. And to elaborate on your question, Automatic Transmission models would not have any Clutch Pedal, so that's a third type. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.