Air Bag Sensor Resistance

[rickrod3]

I have an 05 2500HD
The information center is displaying service air bag system.
I scanned codes B0103 and B0104
My front air bag sensor part number 10370150 is reading open when I check it with a multi meter.
The only information I could find is from Chat which is as follows.
✅ A good GM impact sensor should read:
50 to 85 ohms


❌ Bad readings include:
OL / Open circuit → sensor is dead

0–10 Ω → internal short

Over 100 Ω → corrosion or internal failure

Fluctuating wildly → moisture intrusion or cracked internal resistor

Could anyone confirm this or point me in the right direction?
Thanks in advance