NC to CO on Feb 13th and CO to NC on Feb 20th - The 1947 - Present Chevrolet & GMC Truck Message Board Network

joerocks · 01-22-2004, 09:14 PM

posted this on the message board also here's the link

http://67-72chevytrucks.com/vboard/s...364#post691364

joerocks · 01-25-2004, 01:06 AM

iwas just going to keep this at the top i still have plenty of room. it seems like a shame to waste it-joe

joerocks · 01-29-2004, 02:40 PM

TTT

teeitup · 01-29-2004, 06:10 PM

I'll bring it back to the top for you too Joe!! Joe is stopping by my place on his trip so if anybody needs anything!!!

**BOSS** · 01-29-2004, 10:08 PM

Would you happen to be comeing through southern Missouri?If it is possible could you post your route?Thanx

rolson1039 · 01-29-2004, 10:19 PM

im going to be heading to NC soon so if you guys need stuff hauled to NC and then he can take it from there on his route that could work too Im in NJ

joerocks · 01-30-2004, 02:52 AM

thanks randy

the route is in the other thread (on the link)i will be heading across missouri between st. louis and kansas city on I-70W i'm not sure if thats south enough for you but let me know-joe

pickupman · 01-30-2004, 11:17 PM

Joe, What will you be traveling in. What will you have room for? Will you have a trailer? IRandy has quite a few things I would be interested in, just don't have anyway to get them out here.
Thanks, Bill

**lock** · 01-31-2004, 05:02 PM

teeitup .. Got a rust free drivers door? Im in search of one. Also need a good cab but that may be too much to ask for him to haul.

teeitup · 01-31-2004, 06:26 PM

I got doors 67-71 $75 each, 72 doors $150 each. No good cabs right now. Thanks Randy

**smitty62** · 01-31-2004, 06:43 PM

Teeitup---would you have a good SWB bare frame for a 2wd '68??

joerocks · 01-31-2004, 07:17 PM

i will be driving the 04 colorado and pulling a 16 foot trailer with the toyota loaded and a few spare parts already. i will have about 1/4 of the trailer empty so 1 bare cab should fit, also both truck beds are open for smaller items doors, fenders, engines, trannys, or axles i will have room for one large item(a cab or bed i'll take the first one to respond) probably no room for a frame i'll let you all know when i load up the tralier next week(i can post a pic so yyou will have an idea of how much room i willl have left over). i have fit both the toyota and my 4 wheeler on the trailer with no overhang before so i am pretty sure a bare cab will fit but no room for larger items like frames or complete trucks on this trip.joe

**smitty62** · 01-31-2004, 07:33 PM

That's ok--I was thinking the cab could set on top of the frame on the return trip.

teeitup · 01-31-2004, 07:54 PM

Oh man I'm trying to buy a 68 swb gmc right now but I don't think I'll have it here by then.
Joe, I'm leaving for L.A. on the the 19th.
Thanks Randy

**smitty62** · 01-31-2004, 08:10 PM

Teeitup--thanks, but it appears Joerocks unable to haul a frame anyway.

Maybe by the time you get the GMC stripped someone else will be coming this way

**lock** · 02-01-2004, 01:13 PM

Teeitup, Im putting a door on a 68. Do you have one that rust free and dent free and happen to have a pic? Im definetly interested in seeing if I can get with Joe and grab one during the trip. I may even get a passenger door too if you have a complete good set.

Thanks!

Mark

teeitup · 02-01-2004, 01:25 PM

Mark, I'll try to get some pics, we got ice and snow right now and pics wouldn't be great with a 1/2 inch of ice on the doors, plus I had a accident yesterday and I'm not moving real good. I'll try though. Thanks Randy

**lock** · 02-01-2004, 04:05 PM

Sorry about the accident. Hope you feel better. If you say they are rust free and in good shape then I have no reason not to believe you. Pics aren't needed its just always nice to take a peak

.

**lock** · 02-03-2004, 12:32 PM

Randy, You have a rust free drivers and passenger door or jsut drivers? I figure if Im going thru with this I might as well get a set. I also need a few short stepside bed parts. Mainly the front panel thats next to the cab( sorry dont know a better name) and the rear crossbrace thats under the bed... the one closest to the bumber.

Let me know so I can work with you can Joe in settign this up.

Mark

teeitup · 02-03-2004, 03:05 PM

HI Mark, I got doors and fenders. We got a 1/2 inch of ice and now 9 inches of snow here so its hard to get any pics, sorry. Also no step bed parts right now. Thanks Randy

Fred T · 02-03-2004, 04:35 PM

Quote:

Originally posted by teeitup
HI We got a 1/2 inch of ice and now 9 inches of snow here

And another 4" predicted for the next two days. Must be time to move to south Texas!

**smitty62** · 02-03-2004, 05:24 PM

Think I'd rather have the snow then the bugs in S. Texas!!

70c10 · 02-03-2004, 10:48 PM

Too bad I'm nowhere near your route Joe, my dad needs a nice set of doors for his 70'. Nice of you and rolson1039 to offer delivery to the fellow members though!

joerocks · 02-04-2004, 08:32 AM

cruzman and lock
it will be $25 apiece for the pair of doors and i will be back in nc sometime around the 21st or 22nd-joe

joerocks · 02-04-2004, 08:38 AM

ok i thought about it i'll just post a flat rate for everyone needing anything (let me know if these are too high)

$15 anything sheetmetal or not too heavy (doors,fenders,etc)

$50 anything i need to use my cherry picker to lift or anything heavy (axles,engines,trannys,etc)

$100 i have room for one large(something)whoever is first (bare cab or bed)

the toyota is on 35s with plenty of ground clearance so pretty much anything will fit underneath it-joe

01-22-2004, 09:14 PM	#1
joerocks Registered User Join Date: Dec 2003 Location: gilbertsville,KY Posts: 111	NC to CO on Feb 13th and CO to NC on Feb 20th posted this on the message board also here's the link http://67-72chevytrucks.com/vboard/s...364#post691364 __________________ 1992 Jeep Cherokee 4.0 AUTO 1972 C10 350/350 1971 C1500 350/350 1970 C20 396/400

01-25-2004, 01:06 AM	#2
joerocks Registered User Join Date: Dec 2003 Location: gilbertsville,KY Posts: 111	iwas just going to keep this at the top i still have plenty of room. it seems like a shame to waste it-joe __________________ 1992 Jeep Cherokee 4.0 AUTO 1972 C10 350/350 1971 C1500 350/350 1970 C20 396/400

01-29-2004, 02:40 PM	#3
joerocks Registered User Join Date: Dec 2003 Location: gilbertsville,KY Posts: 111	TTT __________________ 1992 Jeep Cherokee 4.0 AUTO 1972 C10 350/350 1971 C1500 350/350 1970 C20 396/400

01-29-2004, 06:10 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	I'll bring it back to the top for you too Joe!! Joe is stopping by my place on his trip so if anybody needs anything!!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-29-2004, 10:08 PM	#5
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,890	Would you happen to be comeing through southern Missouri?If it is possible could you post your route?Thanx __________________ Support our site Norwood Survivor

01-29-2004, 10:19 PM	#6
rolson1039 Registered User Join Date: Oct 2002 Location: NJ Posts: 404	im going to be heading to NC soon so if you guys need stuff hauled to NC and then he can take it from there on his route that could work too Im in NJ

01-30-2004, 02:52 AM	#7
joerocks Registered User Join Date: Dec 2003 Location: gilbertsville,KY Posts: 111	thanks randy the route is in the other thread (on the link)i will be heading across missouri between st. louis and kansas city on I-70W i'm not sure if thats south enough for you but let me know-joe __________________ 1992 Jeep Cherokee 4.0 AUTO 1972 C10 350/350 1971 C1500 350/350 1970 C20 396/400

01-30-2004, 11:17 PM	#8
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	Joe, What will you be traveling in. What will you have room for? Will you have a trailer? IRandy has quite a few things I would be interested in, just don't have anyway to get them out here. Thanks, Bill __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

01-31-2004, 05:02 PM	#9
lock Insert funny comment. Join Date: Dec 1999 Location: Concord NC Posts: 621	teeitup .. Got a rust free drivers door? Im in search of one. Also need a good cab but that may be too much to ask for him to haul. __________________ ------------ - Mark -My Build Thread... -68 C10, LT1 - Undergoing Frame off resto -86 IROC-Z T72 turbo 355, M6 -70 Camaro http://www.iroc-ss.com

01-31-2004, 06:26 PM	#10
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	I got doors 67-71 $75 each, 72 doors $150 each. No good cabs right now. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-31-2004, 06:43 PM	#11
smitty62 Registered User Join Date: May 2002 Location: North Carolina Posts: 1,234	Teeitup---would you have a good SWB bare frame for a 2wd '68?? __________________ Stepsides look like real trucks! Smitty

01-31-2004, 07:17 PM	#12
joerocks Registered User Join Date: Dec 2003 Location: gilbertsville,KY Posts: 111	i will be driving the 04 colorado and pulling a 16 foot trailer with the toyota loaded and a few spare parts already. i will have about 1/4 of the trailer empty so 1 bare cab should fit, also both truck beds are open for smaller items doors, fenders, engines, trannys, or axles i will have room for one large item(a cab or bed i'll take the first one to respond) probably no room for a frame i'll let you all know when i load up the tralier next week(i can post a pic so yyou will have an idea of how much room i willl have left over). i have fit both the toyota and my 4 wheeler on the trailer with no overhang before so i am pretty sure a bare cab will fit but no room for larger items like frames or complete trucks on this trip.joe __________________ 1992 Jeep Cherokee 4.0 AUTO 1972 C10 350/350 1971 C1500 350/350 1970 C20 396/400

01-31-2004, 07:33 PM	#13
smitty62 Registered User Join Date: May 2002 Location: North Carolina Posts: 1,234	That's ok--I was thinking the cab could set on top of the frame on the return trip. __________________ Stepsides look like real trucks! Smitty

01-31-2004, 07:54 PM	#14
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Oh man I'm trying to buy a 68 swb gmc right now but I don't think I'll have it here by then. Joe, I'm leaving for L.A. on the the 19th. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-31-2004, 08:10 PM	#15
smitty62 Registered User Join Date: May 2002 Location: North Carolina Posts: 1,234	Teeitup--thanks, but it appears Joerocks unable to haul a frame anyway. Maybe by the time you get the GMC stripped someone else will be coming this way __________________ Stepsides look like real trucks! Smitty



Register or Log In To remove these advertisements.

02-01-2004, 01:13 PM	#16
lock Insert funny comment. Join Date: Dec 1999 Location: Concord NC Posts: 621	Teeitup, Im putting a door on a 68. Do you have one that rust free and dent free and happen to have a pic? Im definetly interested in seeing if I can get with Joe and grab one during the trip. I may even get a passenger door too if you have a complete good set. Thanks! Mark __________________ ------------ - Mark -My Build Thread... -68 C10, LT1 - Undergoing Frame off resto -86 IROC-Z T72 turbo 355, M6 -70 Camaro http://www.iroc-ss.com

02-01-2004, 01:25 PM	#17
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Mark, I'll try to get some pics, we got ice and snow right now and pics wouldn't be great with a 1/2 inch of ice on the doors, plus I had a accident yesterday and I'm not moving real good. I'll try though. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-01-2004, 04:05 PM	#18
lock Insert funny comment. Join Date: Dec 1999 Location: Concord NC Posts: 621	Sorry about the accident. Hope you feel better. If you say they are rust free and in good shape then I have no reason not to believe you. Pics aren't needed its just always nice to take a peak . __________________ ------------ - Mark -My Build Thread... -68 C10, LT1 - Undergoing Frame off resto -86 IROC-Z T72 turbo 355, M6 -70 Camaro http://www.iroc-ss.com

02-03-2004, 12:32 PM	#19
lock Insert funny comment. Join Date: Dec 1999 Location: Concord NC Posts: 621	Randy, You have a rust free drivers and passenger door or jsut drivers? I figure if Im going thru with this I might as well get a set. I also need a few short stepside bed parts. Mainly the front panel thats next to the cab( sorry dont know a better name) and the rear crossbrace thats under the bed... the one closest to the bumber. Let me know so I can work with you can Joe in settign this up. Mark __________________ ------------ - Mark -My Build Thread... -68 C10, LT1 - Undergoing Frame off resto -86 IROC-Z T72 turbo 355, M6 -70 Camaro http://www.iroc-ss.com

02-03-2004, 03:05 PM	#20
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	HI Mark, I got doors and fenders. We got a 1/2 inch of ice and now 9 inches of snow here so its hard to get any pics, sorry. Also no step bed parts right now. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-03-2004, 05:24 PM	#22
smitty62 Registered User Join Date: May 2002 Location: North Carolina Posts: 1,234	Think I'd rather have the snow then the bugs in S. Texas!! __________________ Stepsides look like real trucks! Smitty

02-03-2004, 10:48 PM	#23
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Too bad I'm nowhere near your route Joe, my dad needs a nice set of doors for his 70'. Nice of you and rolson1039 to offer delivery to the fellow members though! __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

02-04-2004, 08:32 AM	#24
joerocks Registered User Join Date: Dec 2003 Location: gilbertsville,KY Posts: 111	cruzman and lock it will be $25 apiece for the pair of doors and i will be back in nc sometime around the 21st or 22nd-joe __________________ 1992 Jeep Cherokee 4.0 AUTO 1972 C10 350/350 1971 C1500 350/350 1970 C20 396/400 Last edited by joerocks; 02-04-2004 at 08:39 AM.

02-04-2004, 08:38 AM	#25
joerocks Registered User Join Date: Dec 2003 Location: gilbertsville,KY Posts: 111	ok i thought about it i'll just post a flat rate for everyone needing anything (let me know if these are too high) $15 anything sheetmetal or not too heavy (doors,fenders,etc) $50 anything i need to use my cherry picker to lift or anything heavy (axles,engines,trannys,etc) $100 i have room for one large(something)whoever is first (bare cab or bed) the toyota is on 35s with plenty of ground clearance so pretty much anything will fit underneath it-joe __________________ 1992 Jeep Cherokee 4.0 AUTO 1972 C10 350/350 1971 C1500 350/350 1970 C20 396/400

Register or Log In To remove these advertisements.